LEARN PIPING STRESS ANALYSIS USING CAESAR II & START-PROF
MECHANICAL DESIGN BASICS
INSTRUMENTATION, CIVIL, CONSTRUCTION, SAFETY, MANAGEMENT & PIPELINE DESIGN BASICS
ENGINEERING & PIPING MATERIALS
PDMS-E3D
PROCESS DESIGN BASICS
LATEST FROM US
Underground Piping Stress Analysis Procedure using Caesar II
Several failures in buried piping and pipeline systems over the years forced EPC companies to investigate stresses the system is experiencing. So, in recent times, stress analysis of underground...
14 major changes in ASME B 31.3-2016 with respect to its earlier edition (ASME B 31.3-2014)
14 major changes in ASME B 31.3-2016 with respect to its earlier edition (ASME B 31.3-2014):- Most of you are aware that the latest edition of Process Piping Bible (ASME B 31.3-2016) is issued on...
A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads...
What if Piping Continuation is Unknown? Part 2. Underground Piping
Continued from Part 1 What if Underground Piping Continuation is Unknown? It is necessary to specify the correct boundary conditions while modeling main pipeline stations: valve station, pig...
What is Piping Isometric Drawing? Once the three-dimensional (3D) model has been established in piping design software like PDS, PDMS, or SP3D, Piping Designers/Engineers need to convey that...
Many times, as stress guy, we come across complicated and long piping layout to be modeled in CAESAR II. These may include parallel pump suction/discharge piping, inlet/outlet piping to/from multiple...
