Deluge System: Definition, Working, Applications, and Advantages

What is a Deluge System?

A deluge system is a fixed fire protection system designed to protect against severe fuel hazards. A large number of sprinklers simultaneously act to bring any undesirable fire event under control. Consisting of unpressurized dry piping and open sprinkler heads, the deluge system is directly connected to a water supply and upon activation, a deluge valve releases the water to all the open sprinkler heads simultaneously. Deluge systems can also release other fire-suppressing materials like dry powder, foam, chemicals, or inert gases. Until the deluge valve is activated by an electric, pneumatic, hydraulic, or manual release system, the system piping remains empty and dry but when activated, the deluge system floods the area through pressurized water or other fire extinguishing material.

The main purposes behind using deluge systems are any one or combination of the following :

  • Extinguishment of fire
  • Control of burning
  • Exposure protection
  • Prevention of fire

Working of a Deluge System

As deluge systems are used in special hazard installations, they must work quickly to protect the entire area. Fig. 1 shows a typical deluge system. A deluge system comprises of three main components: deluge spray nozzles and lines, deluge valve set, and deluge system water supply. The working of a deluge system consists of the following four steps:

  • A fire detection (Smoke/Heat/Ultraviolet/Infrared/Optical flame Detector) system detects the fire and sends the signal to the fire alarm panel to activate the deluge valve.
  • Immediately the deluge valve opens which is connected to a water supply.
  • Water flows into the piping system and starts discharging from all nozzles and open sprinklers.
  • After use, the deluge valve can be easily reset to normal operating condition by draining the water remaining inside the pipe and valve body.
Typical Deluge System
Fig. 1: Typical Deluge System

Types of Deluge Systems

According to the method of release, Deluge systems are classified into three categories:

  • Pneumatic release deluge system
  • Hydraulic release deluge system
  • Electrical release deluge system

Applications of a Deluge System

Deluge systems are used in special hazard installations requiring a large quantity of water to control a fast-developing fire. They provide high-velocity suppression. Typical applications of deluge systems are found in:

  • Flammable liquid handling systems.
  • Flammable liquid storage, chemical storage areas.
  • Hydrocarbon processing plants.
  • Refineries/ Fuel Processing Plants.
  • Oil extraction plants.
  • Separation, distillation plants.
  • Large aircraft hangars.
  • Transformers.
  • Crude tanks and vessels.
  • Power Plants.
  • Data Storage units.
  • Paint Shops.
  • Theatres.

Codes and Standards for a Deluge System

The governing codes and standards for a deluge system design and manufacturing are

  • NFPA 15: Standard for Water Spray Fixed Systems for Fire Protection
  • API RP 2030: Application of Fixed Water Spray Systems for Fire Protection in the Petroleum and Petrochemical Industries.
  • ISO 6182: Fire Protection-Automatic Sprinkler System
  • NFPA 13: Standard for the Installation of Sprinkler Systems
  • IP MODEL CODE P19, By Energy Institute – Fire Precautions at Petroleum Refineries and Bulk Storage Installations.

Piping Requirements for Deluge System Design

  • As per NFPA, Requirements for piping arrangements are
    • Sch 40, Carbon Steel (Galvanized) Pipe for up to 8” sizes and
    • Sch 30, Carbon Steel (Galvanized) Pipe for 8” & above
  • Requirements for Piping Installation:
    • In the dry section of the pipe, a Suitable slope needs to be provided.
    • A low point drain at a suitable location is required.
  • Pipe Velocity criteria for deluge system: NFPA 15 allows up to 7.94 m/sec of water velocity for the deluge downstream side. However, based on project piping design philosophy velocity may be limited to 5 m/sec downstream of the deluge valve and 3 m/sec upstream.
  • The deluge system should be designed in such a way that within 30 secs of activation, the water spray fully covers the equipment in that region.
  • As per NFPA 15, the minimum Pipe Sizes for Deluge Systems is 1”.

Advantages of Deluge System

The major advantages of using deluge fire protection systems over other kind of systems are:

  • They can easily control rapidly spreading fire.
  • Very quick response as all sprinklers are open.
  • Their operation can be made fully automatic.
  • Deluge system being a dry system, no risk of frozen pipes
  • They can also be used in conjunction with foam concentrate for better controlling certain types of fire.
  • Water disperses over a large area for efficient fire extinguishing.
Print Friendly, PDF & Email

Anup Kumar Dey

I am a Mechanical Engineer turned into a Piping Engineer. Currently, I work in a reputed MNC as a Senior Piping Stress Engineer. I am very much passionate about blogging and always tried to do unique things. This website is my first venture into the world of blogging with the aim of connecting with other piping engineers around the world.

3 thoughts on “Deluge System: Definition, Working, Applications, and Advantages

    1. Are you opening in internet explorer? kindly check in Chrome or Mozilla or Edge… Its working fine… There is some issue with internet explorer…

Leave a Reply to Anup Kumar Dey Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts