Flange alignment tools are mechanical or hydraulic devices that are used to align or re-align flange joints during pipework construction, maintenance, commissioning, or shut-down activities. During initial bolting or after opening the bolting for maintenance and repair work, the flanges are, in general, misaligned. For proper fit-up of the flanges and smooth working, the flanges are required to be properly aligned. The flange alignment tools are very useful in such activities.
Various industries like chemical, petrochemical, pipeline, water, wastewater, refinery, oil and gas, power, food processing, etc use flange alignment tools to ensure that pipes and other fittings are perfectly aligned. Flange alignment tools are very cost-effective solutions for alignment and they make the alignment job easier.
Working of a Flange Alignment Tool
At the location of the greatest misalignment, the flange alignment tool is attached to the flange joint. The tool then pushes and pulls the flanges to bring them in the correct alignment. Depending on the sizes of the flanges, a range of flange alignment tools is available. The working steps of a typical flange alignment tool can be explained as follows:
Step 1: Determine the location of the greatest misalignment.
Step 2: Attach the Flange Alignment tool at the location of the greatest misalignment.
Step 3: Adjust and secure the tool to the pipe using the strap.
Step 4: Rotate the Screw handle until contact is made with the flange circumference.
Step 5: Continue to rotate the handle till the flanges are pushed and pulled and aligned
All the above-mentioned 5 steps can be represented graphically as shown in Fig. 1 below.
Fig. 1: Flange Alignment tool working steps
Types of Flange Alignment Tools
Depending on the working mechanism, there are two types of flange alignment tools that are used for industrial flange alignment purposes.
Mechanical Flange Alignment Tools and
Hydraulic Flange Alignment Tools
Mechanical flange alignment tools generate the pulling force by mechanical action whereas hydraulic flange alignment tools use the hydraulic action of a fluid to generate forces for alignment. The load-carrying capability of hydraulic flange alignment tools is usually more and they are more suited for very large-diameter piping and pipeline flanges. Mechanical flange alignment tools are preferred for small diameter lower pressure flange applications.
Applications of Flange Alignment Tools
The main purpose of flange alignment tools is to align both flanges for getting a smooth joint during fit-up. The main applications of flange alignment tools are:
Whereas a hydraulic flange alignment toolset consists of the following:
One flange alignment tool,
One hydraulic hose (2m),
One hand pump (including pressure gauge and adapter),
Rachet Belt, and
One portable case
Specification of Flange Alignment Tools
The flange alignment tools are usually specified by their maximum reaction force. The main parameters to specify a typical flange alignment tool are as follows:
I am a Mechanical Engineer turned into a Piping Engineer. Currently, I work in a reputed MNC as a Senior Piping Stress Engineer. I am very much passionate about blogging and always tried to do unique things. This website is my first venture into the world of blogging with the aim of connecting with other piping engineers around the world.
One thought on “What is a Flange Alignment Tool? Applications, Types, and Working of Flange Alignment Tools”
The remarkable corrosion resistance of Fe-Cr-Ni-Mo stainless steel in dilute acidic environments containing trace chlorides has been well-known over the years. The corrosion resistance arises because...
Subsea pipelines play a critical role in transporting oil and gas (hydrocarbon) from remote exploration and production sites to processing facilities and ultimately, consumers. They are essential...
valuable information