Detailed Online Course on Piping Engineering (210 Lectures, 42.5 hours of Content) with Certificate

For the first time, We have come up with an online Complete Piping Engineering Course that covers most of the aspects of piping engineering starting from piping engineering basics, followed by piping materials, testing, codes and standards, Piping Layout, Pipe Stress Analysis, and Pipe Supporting concepts and philosophies. The complete course consists of 200+ lectures prepared by highly experienced piping engineers serving the industry for more than 15 years.

In the 42.5 hours of online video lectures, the instructors have provided whatever they have learned in their vast working experiences with various reputed MNCs. Most of the learnings, best practices, and philosophies are presented in a step-by-step tutorial format so that students can learn all the concepts with ease.

The complete piping engineering course has been divided into four sections as follows:

Piping Engineering Online Course
Piping Engineering Online Course

Section 1: Basics of Piping Engineering (9 Hours)

This section talks about the basics of the process industry, where various topics have been organized in such a way that anyone can understand what a process industry is and how it works. In this section, majorly the following topics are covered

  • Energy Sector
  • Oil and gas Industry
  • Crude Oil Processing
  • Refinery vs Petro-Chemical
  • What is Piping Engineering
  • Engineering Organization
  • Piping discipline
  • Various Disciplines & stakeholders
  • How piping Department Works
  • Piping Systems for Beginners
  • Life Cycle of Oil & Gas projects
  • Life Cycle Phases
  • Life Cycle Stages of Oil & Gas
  • Life Cycle Initiation
  • Life Cycle planning & Execution
  • Life Cycle Closing
  • Components of Piping Engineering
  • Pipe, Valves & Flanges
  • Strainers & Steam traps
  • Codes & Standards
  • Introduction to Stds
  • Difference between ASME B31.1 & B31.3
  • ASME & API Standards
  • Dimensional Standards
  • Material Standards
  • Valve design Standards
  • Pipe thickness
  • Painting & insulation
  • Piping Deliverables & Non-Deliverables
  • Manhour Estimation

Section-2: Piping Materials & Testing (6.5 hours)

In this section, various ASTM standards have been discussed in detail, starting from the basics of metallurgy. Various Lattice structures have been discussed so that the actual usage in the industry can be understood. Moreover, the chemical & mechanical properties of various types of steel are discussed in length. anyone who goes through these details will be able to understand and implements the facts in live projects. The following sections have been discussed in detail:

  • Basics of Metallurgy
  • Understanding FCC & BCC structures-
  • Voids
  • Slips & Dislocations
  • Behavior of Carbon
  • Various ASTM Standards for
  • Carbon Steel
  • Stainless Steel
  • LTCS Material
  • Alloy Steel
  • Inspection, Testing & Marking
  • Metallurgical Test Index
  • Destructive Tests
  • Non-Destructive testing Types
  • Pipe inspection & Marking
  • Impact testing

Section-3: Piping Layouts (13 Hours)

The piping layout is one of the most important section of Piping Engineering because it is the only department that takes inputs from nearly all the disciplines and outputs from the layout department is utilized by almost all the other disciplines. The piping Layout department has to produce the maximum number of deliverables which can make piping engineer’s life miserable, if not planned well. Following topics have been covered so that after getting practical knowledge same could be implemented in live projects.

  • Interaction with Process Department
  • Design Basis
  • 3D model
  • Layout Development
  • Plot plan
  • Pump Piping
  • Pipe rack Piping
  • Exchanger piping
  • Compressor Piping
  • Column piping
  • Tank Farm Layout
  • Underground Piping
  • Model reviews
  • Material Take-off
  • Piping General arrangement Drawings
  • Nozzle orientations
  • Isometrics

Section-4: Piping Stress Analysis (14 hours)

Pipe Stress analysis is an integral part of Piping engineering which decides the flexibility of critical & non-critical piping systems. Caesar II is used in most cases to perform the stress analysis. In this section, not only Basics of stress analysis are explained but how to perform the analysis in CAESAR II is explained in detail. Moreover, this section talks about actual stress analysis for various vessels & equipment in detail. The pipe Support section talks about Pipe Support selection, Pipe Support spans, and Standard & Special Supports. The topics covered are

  • Basics of Stress Analysis
  • Inputs required
  • Stress Critical Line list
  • WRC 537 & WRC 297
  • Thickness calculation
  • Flange Leakage Checking
  • Expansion Loop calculation
  • Learning Caesar II
  • Basics of Caesar II
  • Creating Load Cases
  • Static Load Case Editor
  • Wind & Seismic Analysis
  • Slug & Surge Analysis
  • Modal Analysis
  • Stress analysis
  • Pump Piping
  • Horizontal vessels
  • Buried pipe
  • Storage Tanks
  • GRE piping
  • FRP piping
  • PSV Piping
  • Pipe Supports
  • List & Role of Supports
  • Supporting Span
  • Standard & special Supports
  • Spring & Hanger supports
  • Support Optimization rules

Who can take this Course?

The online piping engineering course will be suitable for

  • Any chemical or mechanical engineer planning a career in the piping engineering industry.
  • Existing piping engineers who wish to gain overall knowledge on all aspects of piping engineering.

How to Enroll for this Course

To enroll in this course, please follow the below-mentioned steps:

  • Visit the course page by clicking here. Read all the details of the topics it covers on the landing page.
  • Click on Add to Cart Button.
  • Next Click on View Cart Button
  • Then click on Proceed to Checkout
  • Fill in the billing details and check the box saying create an account. Put your user name and password. (Alternately you can create your login details initially by clicking here before proceeding with purchasing)
  • Check the box I have agreed to the website terms and conditions.
  • Select the relevant payment option and finish the payment by clicking the complete payment button.
  • The order is complete now. The processing usually takes up to 6 hours to get access to the course. For quicker access, you can call/WhatsApp on +91-9560191444
  • Now Start learning from the course.
  • If you find any difficulties in accessing the course or for any other problems during purchasing, kindly drop a mail on Support@epcland.com or contact directly by calling on +91-9560191444
Print Friendly, PDF & Email

Anup Kumar Dey

I am a Mechanical Engineer turned into a Piping Engineer. Currently, I work in a reputed MNC as a Senior Piping Stress Engineer. I am very much passionate about blogging and always tried to do unique things. This website is my first venture into the world of blogging with the aim of connecting with other piping engineers around the world.

5 thoughts on “Detailed Online Course on Piping Engineering (210 Lectures, 42.5 hours of Content) with Certificate

  1. Hi, I am planning to do online course on piping and pipeline valves testing. Let me know if you have any course on it

  2. Can you please send me the notes for section 1, section 2, & section 3.
    To my email id :- viveknijamkar@gmail.com. It will be a greate help from you my friend….thank you.

Leave a Reply to Vivek Nijamkar Cancel reply

Your email address will not be published.

Recent Posts