PASS/START-PROF Pipe Stress Industry Webinars June 11, 16, 18, 2020

Shortly before launch of a new significant version of PASS/START-PROF 4.84 that will become available very soon, PASS Team announces a series of industry related webinars on the software for piping stress analysis and sizing.
The webinars will cover main features and supported codes of PASS/START-PROF for a specific industry as well as presentation of new software options.

The webinars are already over. You will find some of the recordings and download the slideshows at this link https://www.passuite.com/start#resources-tab. All recordings and slideshow in PDF format will be available in a few days.

Also the recording will be uploaded into our YouTube channel: https://www.youtube.com/channel/UC_ljkg5KFrySygx1ijw8_wQ

PASS/START-PROF is a pipe stress analysis software that is an industry standard in some countries since 1965. Nowadays it is a modern software with an easy-to-use object-oriented piping modelling principle, wide integration capabilities, with a fast growing number of international users and quick development!

Who is recommended to join the webinars?

  • Piping, process, mechanical engineers and designers who look for easy to learn and use, but reliable piping stress analysis software.
  • PASS/START-PROF existing customers who would like to learn about new software features and capabilities.

Three webinars will be held:

  • #1 PASS/START-PROF Capabilities for Pipe Stress Analysis of Power and Process Piping Systems – June 11, 2020
  • #2 PASS/START-PROF Capabilities for Oil & Gas Gathering, Upstream and Midstream Pipelines – June 16, 2020
  • #3 PASS/START-PROF Capabilities for District Heating Stress Analysis – June 18, 2020

Registration link https://passuite.com/press-release/pass_start_industry_webinars_062020

Below you can find the webinar agenda and announce of some few features that are added in the new version 4.84. The full enhancement list is much larger, and will be available after official announce soon!

Agenda for Webinar #1 PASS/START-PROF Capabilities for Pipe Stress Analysis of Power and Process Piping Systems



Learn how PASS/START-PROF can significantly increase your productivity, save time and increase accuracy while piping model creation, its analysis, and reports generation.

• Quick introduction of PASS/START-PROF
• Supported codes for power and process piping
• Integration capabilities
• Object-oriented piping model creation principle
• Piping object types: pipe, tees, bends, reducers, etc.
• Equipment objects: Nozzle, Tank Nozzle, Pump, In-line Pump, Turbine, Compressor, Air cooler, Fired heater
• Expansion joint objects
• Databases, ASME B31J, Creep self-springing effect, wind, ice, snow, seismic loads
• Minimum design metal temperature (MDMT) according to 323.2.2 (a)-(j) ASME B31.3
• Alternative occasional allowable stress 302.3.6 ASME B31.3
• Creep-Rupture usage factor, Appendix V ASME B31.3
• FRP/GRP/GRE piping analysis
• Pipe and fittings wall thickness calculation
• Operation mode editor. Load cases
• Analysis reports: Stress in piping, Stress in insulation, Seismic stress, Flaw stress, Restraint loads, Equipment loads, Displacements, Expansion joints check, variable spring selection, constant spring selection, buckling analysis, flange leakage
• Special features

Agenda for Webinar #2 PASS/START-PROF Capabilities for Oil & Gas Gathering, Upstream and Midstream Pipelines

Learn how PASS/START-PROF can significantly increase your productivity, save the time and increase the accuracy while pipeline model creation, its analysis, and reports generation.
• Quick introduction of PASS/START-PROF
• Supported codes for pipelines
• Object-oriented pipiline model creation principle
• Piping object types pipe, tees, bends, reducers, etc.
• Underground and aboveground pipeline modeling abilities
• Soil model for dry and liquified soil. Submerged pipelines. Buoyancy
• Soil model for horizontal, inclined, vertical pipelines
• Restrained and unrestrained zones automatic analysis
• Seismic wave propagation analysis
• Soil subsidence, frost heaving, landslide, seismic fault crossing
• Natural arch of collapse phenomena, horizontal directional drilling
• Ring bending calculation using nonlinear FEA
• Databases, wind, ice, snow, seismic loads
• Pipe and fittings wall thickness calculation
• Operation mode editor. Load cases
• Analysis reports: Stress in piping, Stress in insulation, Seismic stress, Flaw stress, Restraint loads, Equipment loads, Displacements, Expansion joints check, variable spring selection, constant spring selection, buckling analysis, flange leakage
• Special features

Agenda for Webinar #3 PASS/START-PROF Capabilities for District Heating Stress Analysis

Learn how START-PROF can significantly increase your productivity, save the time and increase the accuracy while district heating system model creation, its analysis, and reports generation.

• Quick introduction of PASS/START-PROF
• Supported codes for district heating systems
• Object-oriented piping model creation principle
• Piping object types pipe, tees, bends, reducers, etc.
• Underground and aboveground modeling abilities
• Soil model for horizontal, inclined, vertical pipelines
• Polyurethane foam insulation stiffness, expansion cushion stiffness
• Database of polyurethane pre-insulated pipes: LOGSTOR, POWERPIPE, +GF+ Urecon, etc.
• Polyurethane foam insulation stress check
• Check stresses from surface vehicle loads
• Pre-heating analysis
• Single use compensators analysis. Calculate the distance
• Material Database for EN 13480 and 13941 codes
• Ring bending calculation using nonlinear FEA
• Databases, wind, ice, snow, seismic loads
• Pipe and fittings wall thickness calculation
• Operation mode editor. Load cases
• Analysis reports: Stress in piping, Stress in insulation, Seismic stress, Flaw stress, Restraint loads, Displacements, Expansion joints check, variable spring selection
• Special features

Registration Links: https://passuite.com/press-release/pass_start_industry_webinars_062020

Click here to access other useful START-PROF Training Articles

Alex Matveev

Alex Matveev is one of the authors of pipe stress analysis codes GOST 32388-2013 Process Piping, and GOST 55596-2013 District Heating Networks. He is also one of the developers of PASS/Start-Prof software, which is developed since 1965 and used in 95% of process, power, district heating, gas and oil transportation design companies in Russia and CIS countries; it is industry standard in that region

2 thoughts on “PASS/START-PROF Pipe Stress Industry Webinars June 11, 16, 18, 2020

    1. Very good! Register here please https://passuite.com/press-release/pass_start_industry_webinars_062020

Leave a Reply

Your email address will not be published. Required fields are marked *

 

Recent Content