A Presentation on Pipelines – Material Selection in Oil & Gas Industry

Types of Pipeline in Oil & Gas Industry

  • Injection lines: Pipelines injecting water/steam/polymer/gas into the wells to improve the lift.
  • Flow lines: Pipelines from the wellhead to the nearest processing facility.
  • Trunk lines / Inter field lines: Pipelines between two processing facilities or from pig trap to pig trap or from block valve station to block valve station.
  • Export lines / Loading lines: From the processing facility to the loading or export point.
  • Transfer lines / Spur lines: Branch line exiting into trunk line or export line.
  • Gathering lines: One or more segments of pipelines forming networks and connected from the wells to processing facilities.
  • Disposal lines: Pipeline which disposes of normally produced water into disposal wells (shallow/deep).
  • Subsea pipelines: Pipelines connecting the offshore production platforms to onshore processing facilities.

Pipeline Typical Flow Scheme – Export Crude (Fig. 1)

Figure showing Pipeline Typical Flow Scheme – Export Crude
Fig. 1: Figure showing Pipeline Typical Flow Scheme – Export Crude

Pipeline Typical Flow Scheme – Export Gas (Fig. 2)

Figure showing Pipeline Typical Flow Scheme – Export Gas
Fig. 2: Figure showing Pipeline Typical Flow Scheme – Export Gas

Pipeline Typical flow scheme – Offshore (Fig. 3)

Figure showing Pipeline Typical Flow Scheme – Offshore
Fig. 3: Figure showing Pipeline Typical Flow Scheme – Offshore

Codes used in Oil & Gas Industries

Design and Construction

  • ASME B31.4 – Pipeline Transportation Systems for liquid hydrocarbons and other liquids
  • ASME B31.8 – Gas Transmission and distribution piping systems
  • ISO – 13623 – Petroleum and Natural gas industries  Pipeline transportation systems
  • DNV –F-101 – Offshore Standard for submarine pipeline systems

Sour Applications

  • NACE MR-01-75 – Sulphide stress cracking resistant materials for oilfield equipment
  • ISO 15156 – Materials for use in H2S containing environments in oil and gas production


  • API 5L – Specification for line pipe
  • API 5LC – Specification for CRA line pipe
  • API 5LD – Specification for CRA clad or lined pipe
  • API 5LE – Specification for Polyethylene line pipe
  • ISO 3183 – Petroleum & Natural gas industries – Steel Pipe
  • ISO 14692 – Petroleum and Natural gas industries – Glass Reinforced plastic piping
  • AWWA M – 45 Fiberglass pipe design

Pipeline Fittings

  • ISO – 15590 – 1 Pipeline Induction bends
  • ISO – 15590 – 2 Pipeline Fittings
  • ISO – 15590 – 3 Pipeline Flanges
  • MSS – SP 75 – Specification for High Test Wrought Butt welding fittings
  • MSS – SP 44 – Steel Pipeline Flanges
  • ASTM A 694 – Steel forgings for high-pressure transmission service


  • API 6D – Pipeline valves
  • API 594 – Check valves
  • API 608 – Metal Ball Valves
  • API 609 – Butterfly valves
  • ISO 14313 – Petroleum & Natural gas industries – Pipeline valves

Other Pipeline Components

  • Pig launcher / Pig receivers
  • Barred Tees
  • Isolation Joints
  • Pig signallers
  • Corrosion monitoring fittings
  • Shrink sleeves / External coatings / Cathodic protection for buried lines

Corrosion Threats in Oil & Gas

  • CO2 Corrosion (Sweet Corrosion) – General metal loss due to the presence of CO2 in the process fluid.
  • H2S Corrosion (Sour Corrosion) – Localized metal cracking and corrosion due to the presence of H2S in the process fluid.
  • Chlorides and Bicarbonates – Cracking in the metal due to the presence of stress and chlorides in the process fluid.
  • Corrosion due to Oxygen – Oxidation and metal loss due to the contact of metal with oxygen in the process fluid.
  • Microbiologically induced corrosion – Bacteria that induces corrosion particularly within H2S
  • Erosion (Abrasion) corrosion – Corrosion due to the fluid flow and velocity within the pipe environments.
  • Corrosion (External) Threats in the facilities – External atmospheric corrosion on above-ground lines and corrosion due to soil for buried lines.
  • Corrosion Under Insulation – External corrosion due to water ingress under the insulating materials.

Material Selection Process

  • Identify corrosion threats
  • Define the corrosion circuits
  • Calculate the corrosion rate per year
  • Calculate the Service Life Corrosion (SLC) based on design life
  • Consider the materials options
  • Carry out the Life Cycle Costing (LCC) – Capex / Opex / Install
  • Review the materials selection w.r.t design / operating / constructability
  • Finally, select the choice materials

Corrosion Agents in Oil & Gas

  • Carbon Dioxide – CO2
  • Hydrogen Sulphide – H2S
  • Oxygen – O2
  • Chlorides – Cl-
  • Water – H2O

Material Options


  • CS with a corrosion allowance
  • Stainless Steel
  • Duplex Stainless Steel
  • Super Duplex Stainless Steel

Metals + Lining:

  • CS with internally coated FBE
  • CS with internal PE lining
  • CRA clad/lined materials

Non Metals:

  • Glass Reinforced Epoxy (GRE)
  • Polyethylene (HDPE)

Advantages & Disadvantages of Material Options (Fig. 4)

Advantages and Disadvantages of materials
Fig. 4: Advantages and Disadvantages of materials

Corrosion Control in Oil & Gas Pipeline Chemical Injections

Corrosion inhibitor: Basically meant for CS pipelines, forms a layer of film on the surface and protects the core pipe from corrosion attack. Batch injection or continuous

Scale Inhibitor: Prevents scale formation in the pipelines by dissolving scale-forming salts

Wax  inhibitor: Dissolves the wax  within the crude

Oxygen Scavenger: Reacts and removes oxygen in the fluid

Biocide:  Destroys the bacteria, algae, and fungi in the process fluid.

Coagulant / Antifoam: Normally mixed in the separators to improve mixing and reducing the foam

Demulsifier: Prevents emulsion in the multiphase system

Dehydration  agents: Removes  moisture in the gas normally  Glycol injection

Odorant: Added to the fluid to add  smell and detect the leakage

Few more Pipeline related useful Resources for You..

Underground Piping Stress Analysis Procedure using Caesar IIOpens in a new tab.
Comparison between Piping and Pipeline EngineeringOpens in a new tab.
A Presentation on Pipelines – Material Selection in Oil & Gas IndustryOpens in a new tab.
Corrosion Protection for Offshore PipelinesOpens in a new tab.
Start up and Commissioning of the Pipeline: An ArticleOpens in a new tab.
A short presentation on: OFFSHORE PIPELINE SYSTEMS: Part 1Opens in a new tab.
Factors Affecting Line Sizing of Piping or Pipeline SystemsOpens in a new tab.
Few Job Opportunities for YouOpens in a new tab.

Print Friendly, PDF & Email

Anup Kumar Dey

I am a Mechanical Engineer turned into a Piping Engineer. Currently, I work in a reputed MNC as a Senior Piping Stress Engineer. I am very much passionate about blogging and always tried to do unique things. This website is my first venture into the world of blogging with the aim of connecting with other piping engineers around the world.

5 thoughts on “A Presentation on Pipelines – Material Selection in Oil & Gas Industry

  1. Amazing article I have ever read.Thanks for posting this wonderful, informative article. I’m happy that you shared this helpful information with us. Please keep us up to date like this.

  2. Great article, Thanks for posting this wonderful, informative article.
    I think it would be perfect if you’ll continue with stress calculation for Pipelines system.
    While waiting for the continuity, I mean “Stress calculation for Pipelines”
    Thanks again and have a wonderful day

  3. It is a pleasure worth reading this article which is stating about the pipelines material.This article is very helpful and knowledgeable for everyone. It makes the work straight and easy for us. I am sure many people will come to read this in future.I never thought will get to visit this site which has some nice content for everyone.

Leave a Reply to Chakib BENZERGA Cancel reply

Your email address will not be published. Required fields are marked *

Recent Content

Enable Notifications    Ok No thanks