drum – What Is Piping: All about Piping Engineering

Process Industries uses various types of equipments for different process reasons. The main purpose of this presentation is to discuss the basic aspects related to fixing an appropriate location for the piping design of static equipment. Static equipment generally found in process plants are as follows: Fired HeatersReactorsExchangersAir-cooled Heat ExchangersDrumsTowers Fixing Location of Fired Heaters The fired heater shall be located at the upwind direction or at least crosswind from sources of hydrocarbon leaks.The minimum distance is required between the fired heater and the fractionating tower and reactor.Provide tube removal/maintenance space within battery limits. Crane access may be necessary, especially for vertical tubes.Provide space for removal/maintenance of burners, soot blowers, convection sections.Knockout drums for fuel gas supply to fired heaters shall be located as close as possible. Fig. 1: Figure of a typical Fired Heater Fixing Location of Reactors Location shall be as close as possible to Fired Heaters so that piping is short and simple.Reactors shall be located for ease of access during catalyst unloading and loading operations.Space shall be allowed for cranes and storage of spent and new catalysts.The separate structure with the platform if required for catalyst loading and unloading.Space shall be allowed for TW- removal & maintenance. Fig. 2: Figure of a typical Reactor Fixing Location of Exchangers Locate exchangers at grade unless the elevated location is required by the Client.Shell and tube exchangers shall be located with channel end away from pipe ways to facilitate tube bundle removal.For exchangers under drums or unit structures, where ever possible the channel end shall be clear of overhead structures for the handling of channel end by mobile equipment.Heat exchangers containing flammable liquids above 260 C, or their auto-ignition temperature (if lower), shall not be located beneath other equipment.Exchangers shall be located close to the associated equipment and pipe rack, so that piping is short, but adequate flexibility. Fixing Location of Air-cooled Exchangers Process equipment shall not be located above or below air-cooled heat exchangers.Locate above the unit pipe rack.Can’t locate where the discharge air from one exchanger can become the incoming air to another exchanger.Provide crane access to air-cooled heat exchangers for maintenance.The distance between the air condenser outlet and the receiver shall be minimized. Fig. 3: Figure of a typical Air Cooled Heat Exchanger Fixing Location of Drums Drums are located within a processing unit either adjacent to related equipment or as a standalone operationShould be positioned to facilitate an orderly and economic piping interconnection.Generally, drums are located on either side of a central pipe rack serviced by auxiliary road for maintenance accessDrums are generally located at all levels of enclosed or open-sided structures. You may be interested in Static Equipments used in Process Piping Industry Nozzle Loading of Various Equipments and means for reducing them Considerations for Equipment and Piping Layout of Air Cooled Heat Exchanger Piping A Brief Presentation on Storage Tanks Vendor Offer Review, TBE and Vendor Drawing Review Construction and Maintenance of Fired heaters