Inputs to piping – What Is Piping: All about Piping Engineering

Piping Engineering is not a standalone activity. To successfully finish all engineering aspects piping engineer needs to depend on other disciplines in terms of input and output. While designing a piping system, many inputs are required from other disciplines and at the same time inputs are given to other disciplines too. There are also few outputs generated by piping that is required for procurement, erection, and fabrication of the piping system. This article will list a few such inputs and outputs to give the readers an idea in brief. Inputs to Piping discipline Requirements from the client: Plot area and location, statutory requirement, special requirements, software to be used, etc.Process licensor: Project design basis, design code, plot plan, PFDs(Process Flow Diagram), P&IDs (Process and Instrumentation Diagram), PDS (Process Data Sheet), process description, equipment list, line list, site data, licensor, capacity, etc.Process information: Process data sheet showing overall dimensions, supporting arrangement, all nozzles location, size, rating, etc. for equipment.Civil/Structural layout, drawing: Effluent & drain sewers layouts and manholes location.Civil drawings (plan and elevation) for the facilities within the unit like instrumentation control room, electrical sub-station, and laboratory.Pipe racks and technological structure foundation drawings.Civil drawings for platforms.Tank settlement data. Soil Properties.Instrument drawing:Tray width requirement on pipe rack/sleepers.Instrumentation hook-up drawing.Instruments drawings for control valves, safety valves, inline instruments, etc.Electrical layout:Tray width requirement on pipe rack/pipe sleepers and cable trenches width in units/off-site.Electrical cable tray layout.Mechanical (Static/Rotary/Package) layout:Mechanical datasheets for equipment like columns, vessels, tanks, etc. Layout drawing of packages items showing auxiliary equipment.HVAC (Heating, Ventilation, and Air conditioning): Layouts showing the HVAC duct size and the location. Fig. 1: Piping Vs Other Disciplines Outputs from Piping discipline: Overall plot plan showing the location of various units, tank farms, offsite, package units, non-plant buildings, roads, culverts, pipe racks, sleepers, etc.PMS (Piping Material Specification)& VMS (Valve Material Specification).Equipment general arrangement drawing/layouts indicating the location of all the equipment within the unit, platforms, ladders, overhead crane elevation, monorail location, cutouts for piping.Pipe rack general arrangement drawing & structures for equipment supportPiping general arrangement drawing/Layouts showing all the piping and equipment.Piping Bill of Materials (BOM) with technical evaluation and technical bid analysis (TBA).Piping stress analysis report for the critical lines.Support loading for critical lines for structure design.A drawing showing the vessel cleats location for pipe supports and platform/ladder.Layout for underground services.Piping isometrics with the bill of material.Support location plan, support schedule, pipe support drawings.Purchase specification for insulation, painting, wrapping, and coating.Material handling study.