Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Mechanical
  • Process
  • Piping Interface
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Health & Safety
    • Inspection and Testing
    • Maintenance
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Tag: Stress Analysis

link to Turbine Piping: Definition, Working Philosophy, Layout Consideration, Stress Analysis, NEMA SM 23 (With PDF)

Turbine Piping: Definition, Working Philosophy, Layout Consideration, Stress Analysis, NEMA SM 23 (With PDF)

Turbine piping stress analysis is one of the most critical analysis in piping design. It is due to the following reasons Turbines are strain sensitive and have less allowable nozzle loads.Friction...

Continue Reading
link to Methods for flange leakage checking by Pressure Equivalent Method using Caesar II

Methods for flange leakage checking by Pressure Equivalent Method using Caesar II

Hopefully, all of you have gone through my post on Methods for checking flange leakage. In that article, I had mentioned the theoretical background (analysis criteria, the basic theory behind flange...

Continue Reading
link to Stress Analysis of GRP / GRE / FRP piping system using Caesar II (ISO 14692)

Stress Analysis of GRP / GRE / FRP piping system using Caesar II (ISO 14692)

GRP products being proprietary the choice of component sizes, fittings, and material types are limited depending on the supplier. Potential GRP vendors need to be identified early in the design stage...

Continue Reading
link to Stress Analysis of Vertical Reboiler Piping using Caesar II

Stress Analysis of Vertical Reboiler Piping using Caesar II

Significance of Vertical Reboiler Vertical Reboilers play a significant role in the Process industry. Reboilers are a type of Heat exchangers which are used for heating the bottom fluid of...

Continue Reading
link to Pipe Trunnion or Dummy Support and their Stress Calculation (PDF)

Pipe Trunnion or Dummy Support and their Stress Calculation (PDF)

What is a Pipe Trunnion? Piping Trunnion supports are one of the most frequently used pipe supports in the piping industry. This support is widely used in the piping industry due to its ease of...

Continue Reading
link to Caesar II Error: “Could Not Open TEMPMAT”: Why this is generated and steps to overcome it

Caesar II Error: “Could Not Open TEMPMAT”: Why this is generated and steps to overcome it

Sometimes, while working with Caesar II software during opening a CAESAR II Piping Input files, many of you might have come across an error similar to the one shown in Fig. 1 (Could not open...

Continue Reading
Page 1 Page 2 Page 3 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced piping engineer for the last 19 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2022 Copyright What is Piping