In piping stress analysis, both the subject terms i.e, Sustained Stress and Expansion Stress are widely used. For all the piping systems which needs analysis, the calculated sustained and expansion stresses has to be kept below code allowable stress. In the following tutorial both of this stresses are clearly explained.

## What is Sustained Stress?

Sustained stress is one of the primary stress caused by Weight (Pipe Weight, Insulation Weight, Fluid weight, etc) and Pressure (Internal and External Pressure). This stress is present in the piping system throughout the plant operating life. Means this stress will remain as long as the piping system survives and that’s why it is very important to calculate the piping sustained stresses and keep the stresses below code allowable values.

ASME B31 codes provide equations for sustained stress calculation and also provides allowable values to compare the calculated stress.

## What is Expansion Stress?

Expansion stress is a displacement driven secondary stress generated in piping system due to temperature change or thermal differential from the installed to operating temperature.

Whenever the temperature of a piping system changes from one value to another, the system starts to move (expansion or contraction). If this free thermal movement is restricted then thermal stresses will be generated in the system.

It is obvious that Piping systems in process or power industries are connected to some equipment or other piping. Which means free thermal movement is restricted which causes to increase the thermal stress.

All B 31 codes provide equation for calculating this expansion stress and then compare the calculated stress with allowable values.

## Basics of Sustained and expansion Stress in Piping System

The following two video tutorials nicely explains the basics of sustained and expansion stress in a piping system

**Video Tutorial 1:**

**Video Tutorial-2:**

Few More useful Resources for you..

Piping Stress Analysis Basics

Piping Stress Analysis Using Caesar II

Piping Stress Analysis using Start-Prof

Piping Design and Layout Basics

Piping Material Basics

Few Job Opportunities for you

I have a small doubt regarding batch run.

Recently when I modeled a piping and generated report for sustained load case, it is showing that ” no code stress check processed”.

Besides that allowable stress doesn’t match with the allowable stress for given material in B31.3 at provided temperature.

So please tell me how I can resolve both the issues.