Video: Introduction of PASS/NOZZLE FEM

Video series created by PASS distributor in Australia – Moonish Engineering

PASS/NOZZLE FEM allows to

  • Calculate Nozzle flexibilities to use in
    PASS/START-PROF, CAESAR II or other pipe stress software
  • Calculate Nozzle allowable loads
  • Calculate SIF for nonstandard tees to use in PASS/START-PROF , CAESAR II or other pipe stress software
  • Calculate allowable pressure for nozzle
  • Calculate tank nozzle flexibilities and allowable loads
  • Check pressure vessel, column and tank Nozzle stress from loads generated by pipe stress analysis software PASS/START-PROF, CAESAR II
https://youtu.be/DMElDVUgvJU

Introduction to PASS/NOZZLE FEM
https://youtu.be/XRVVqTYEJEk
How to Start New Calculation in PASS/NOZZLE FEM
https://youtu.be/0oA2xpjYz8k
How to Change Units in PASS/NOZZLE FEM
https://youtu.be/QHFvLme2FDU
How to Set Basic Parameters for PASS/NOZZLE FEM
https://youtu.be/tiDXALteglk
How to Set Shell and Nozzle Paratemers in PASS/NOZZLE FEM
Print Friendly, PDF & Email

Alex Matveev

Alex Matveev is one of the authors of pipe stress analysis codes GOST 32388-2013 Process Piping, and GOST 55596-2013 District Heating Networks. He is also one of the developers of PASS/Start-Prof software, which is developed since 1965 and used in 95% of process, power, district heating, gas and oil transportation design companies in Russia and CIS countries; it is industry standard in that region. He is the head of the PASS/START-PROF pipe stress analysis software development team. Also, He offers technical support and training for users of their software that number already 3000+, developing since 1965, industry standard in several countries for 50+ years, translated into English in 2017, come out from their domestic market, and started sales for the international market since 2018.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts

Enable Notifications    OK No thanks