Control Valve Sizing is a procedure of deciding the appropriate type and size of the control valve to optimally satisfy the requirements of fluid flow management. This article will describe the...
Posts by Anup Kumar Dey
Underground Piping Stress Analysis Procedure using Caesar II
Several failures in buried piping and pipeline systems over the years forced EPC companies to investigate the stresses the system is experiencing. So, in recent times, stress analysis of underground...
Changes in ASME B31.3-2016 with respect to its earlier edition (ASME B31.3-2014)
14 major changes in ASME B31.3-2016 with respect to its earlier edition (ASME B31.3-2014) Most of you are aware that the latest edition of Process Piping Bible (ASME B31.3-2016) is issued on 31st...
A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads...
A Combined Cycle Power Plant (CCPP) is a highly efficient type of electricity generation facility that combines two distinct thermodynamic cycles, namely the Brayton cycle and the Rankine cycle, to...
The purpose of this article is to explain the slug flow in piping and the static analysis of the piping system having slug flow using Caesar II. One of the major causes of piping vibration in...