Cold Pull: How cold pull is applied at site and its drawback
This article is a continuation of my earlier article on Cold Springing which describes a few basic points regarding Cold Pull or Cold Springing. Click here to refer to that article. How Cold...
Inspection & Test, Marking & Color Coding and Packing Requirements for Pipes & Fittings
The technical requirements for the piping components are mentioned in my earlier post. Click here to refresh those requirements. Additional to those requirements, the Requisition Engineer should...
Meaning of Pipe Schedule | Pipe Schedule Chart | Pipe Schedule 40 & 80 Dimensions
The Pipe Schedule describes the pipe wall thickness. With an increase in pipe schedule number pipe thickness increases. The main function of the pipes is to carry fluid (liquid, gas, fluidized...
The huge expansion of the piping industry where it is today is mainly for the available codes, standards, and recommended practices. The main concern for designing any process plant is the safety of...
The main function of instrumentation in every process plant is to collect intelligence from the working plant and use those data to control the process parameters as per predefined conditions....
Proper pipe selection for a plant is really a difficult task. Organized efforts of Metallurgist and Process Engineers are required for proper pipe selection. There are two approaches to pipe...
