A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads...
Category: Piping Stress Analysis
What if Piping Continuation is Unknown? Part 2. Underground Piping
Continued from Part 1 What if Underground Piping Continuation is Unknown? It is necessary to specify the correct boundary conditions while modeling main pipeline stations: valve station, pig...
Many times, as stress guys, we come across complicated and long piping layouts to be modeled in CAESAR II. These may include parallel pump suction/discharge piping, inlet/outlet piping to/from...
The purpose of this article is to explain the slug flow in piping and the static analysis of the piping system having slug flow using Caesar II. One of the major causes of piping vibration in...
Start-Prof can estimate the support loads and stresses caused by relief valve discharge by an equivalent static method. The relief valve discharge thrust load acts on elbow 28. In Start-Prof it...
Why Analyze Column Piping Columns or Towers, used for distilling raw materials (Crude Oils) are very important equipment in any process industry. Every process piping industry must have several...