A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads...
Recent Posts
What if Piping Continuation is Unknown? Part 2. Underground Piping
Continued from Part 1 What if Underground Piping Continuation is Unknown? It is necessary to specify the correct boundary conditions while modeling main pipeline stations: valve station, pig...
Piping Isometric Drawings | Symbols, How to Read, Software | Piping Isometrics
Once the three-dimensional (3D) model has been established in piping design software like PDS, PDMS, or SP3D, Piping Designers/Engineers need to convey that information to the yard for fabrication...
Many times, as stress guys, we come across complicated and long piping layouts to be modeled in CAESAR II. These may include parallel pump suction/discharge piping, inlet/outlet piping to/from...
A Combined Cycle Power Plant (CCPP) is a highly efficient type of electricity generation facility that combines two distinct thermodynamic cycles, namely the Brayton cycle and the Rankine cycle, to...
What is Slug Flow? Steps for Slug Flow Analysis and Prevention
Slug flow is a phenomenon that occurs in multiphase flow systems, particularly in pipes and pipelines carrying gas and liquid phases. It is characterized by the intermittent presence of large,...