Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Mechanical
  • Process
  • Piping Interface
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Health & Safety
    • Inspection and Testing
    • Maintenance
  • Piping Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Tag: pipingenginerring

link to Modeling Piping Connection to Storage Tank

Modeling Piping Connection to Storage Tank

The tank nozzle can be modeled using the special "Tank Nozzle" object in START-PROF software. Tank connection modeling has a special significant features in comparison with pressure...

Continue Reading
link to How to Avoid Zero Anchor Loads from Piping

How to Avoid Zero Anchor Loads from Piping

Why Software may show Zero Anchor Loads? While stress analysis and supporting considerations it is always a better engineering practice to provide line stops or axial stops or anchors at the...

Continue Reading
link to Smart Tee Model considerations in START-PROF

Smart Tee Model considerations in START-PROF

This article provides guidelines for modeling Tee or branch connections using Software START-PROF. The guideline covers modeling for both the Standard Tee and Non-Standard Tee Connection. Modeling...

Continue Reading
link to What is Thermal Bowing?

What is Thermal Bowing?

The thermal bowing phenomenon occurs when a horizontal pipe is filled partially by hot or cold fluid (LNG). Many thermal bowing occurrences cause unexpected damage to the piping or supporting...

Continue Reading
link to Modular Design. How to do a Piping Stress Analysis

Modular Design. How to do a Piping Stress Analysis

The idea of modular design is as follows: The complex piping system is divided into several modules that are mounted on a frame structure. Modules can be transported to the site and joined to each...

Continue Reading
link to Video: How To set Shell and Nozzle Parameters in Nozzle FEM

Video: How To set Shell and Nozzle Parameters in Nozzle FEM

Nozzle-FEM is designed for stresses and flexibility calculation of nozzle-to-shell junctions using the Finite Element Method (FEM). The program also calculates nozzle’s allowable loads and...

Continue Reading
Page 1 Page 2 Page 3 … Page 6 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced piping engineer from the last 15 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

Subscribe to get Regular Updates

Enter your email address:

  • CONTACT
  • ABOUT
  • PRIVACY
© 2021 Copyright What is Piping