Basics of Centrifugal Compressors: A presentation
Compressors are intended to compress a substance in a gaseous state. Process compressors are used to compress a wide range of gases over a wide range of conditions. Compressor Applications
Search Results for: compressor
Shaft Alignment Methodology for Compressor and Driver
Before connecting the process gas pipings with compressor nozzles, the shaft alignment work for the compressors and driver shall be carried out to ensure their concentricity. This concentricity between shaft and driver is very important for proper smooth working of the compressors. This article will explain the alignment methodology in brief.
Difference between Centrifugal and Reciprocating Compressor
What is a Centrifugal Compressor? A centrifugal compressor is a dynamic compressor with a radial design. Gaseous Fluid enters the center of a rotating impeller with radial blades and is
Overview of Reciprocating Compressors
In a reciprocating compressor, a volume of gas is drawn into a cylinder; it is trapped, and compressed by piston and then discharged into the discharge line. The cylinder valves
Stress Analysis of Centrifugal Compressor Connected Piping Systems using Caesar II
Centrifugal compressors are considered to be one of the most critical equipments in the piping industry. For increasing the pressure of gaseous fluids centrifugal compressors are widely used in refineries
A Brief Overview of Centrifugal Compressor System Process Design
Process Datasheet Defines the suction and discharge conditions (P, T, Flowrate) and gas composition. The main input to the compressor vendor. Define all possible options of suction and discharge conditions
