Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Mechanical

link to Details about Spectacle Blind and Spacers

Details about Spectacle Blind and Spacers

What is a Spectacle blind and Spacer? Spectacle blinds and Spacers are pressure-retaining devices used in the piping/pipeline industry to temporarily or permanently blind (shut) or isolate part of...

Continue Reading
link to What are Insulating Gaskets? Their Types, Components, Applications, Installation

What are Insulating Gaskets? Their Types, Components, Applications, Installation

What is Flange Insulation Gasket Kit? The most common problematic area for a Piping/Pipeline System design is flanges. So we have to be doubly sure to seal it properly to prevent flange leakage....

Continue Reading
link to Injection Point and Mixing Points for Process Streams

Injection Point and Mixing Points for Process Streams

Injection and mixing points are locations used frequently in refineries, petrochemical, and power plants and carry a potential risk of increased degradation rate compared to the mainline due to the...

Continue Reading
link to Collar Bolts To Maintain Removable Bundles in Heat Exchangers

Collar Bolts To Maintain Removable Bundles in Heat Exchangers

What is a Collar Bolt? Collar bolts are a type of fastener that is extensively used to hold the bundle in the exact place for removable bundle heat exchangers. This ensures the channel removal...

Continue Reading
link to What is FMS or Flow Metering Skid?

What is FMS or Flow Metering Skid?

What is FMS or Flow Metering Skid? A Flow Metering Skid is a framed or moduled device on which various other assemblies are fitted for the measurement (flow rates) of gas or liquid products. The...

Continue Reading
link to What is Acoustic-Induced Vibration or AIV?

What is Acoustic-Induced Vibration or AIV?

What is Acoustic-Induced Vibration or AIV? Acoustic-Induced Vibration or AIV is a severe high-frequency vibration that the piping systems carrying vapor or gases may experience near the...

Continue Reading
« PREV Page 1 … Page 34 Page 35 Page 36 Page 37 Page 38 … Page 51 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping