Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Mechanical

link to Plastic Piping System: Types of Plastic Pipes

Plastic Piping System: Types of Plastic Pipes

As the name implies, plastic pipes are made of plastic materials. Due to its many advantages, plastic pipes are the ideal choice in many piping and plumbing solutions. In fighting corrosion, plastic...

Continue Reading
link to Dry Gas Sealing Systems

Dry Gas Sealing Systems

Dry Gas Seals (DGS) are basically mechanical face seals consisting of a mating (rotating) ring and a primary (stationary) ring. During operation, grooves in the mating ring generate a fluid-dynamic...

Continue Reading
link to Flange Bolt Tightening Procedure | Bolt Tightening Steps

Flange Bolt Tightening Procedure | Bolt Tightening Steps

The correct placement of the gasket and proper tightening of bolts in a flanged joint will ensure a leak-free joint. Proper bolt tightening will ensure uniform load distribution in all bolts without...

Continue Reading
link to Brief Explanation of Major Pressure Vessel Parts

Brief Explanation of Major Pressure Vessel Parts

Pressure Vessels are one of the most important Static or stationary equipment for any process plant. We can not think about any chemical plants or Refineries or Petrochemical complex which runs...

Continue Reading
link to Overview of Offshore Pipeline Systems

Overview of Offshore Pipeline Systems

Offshore pipelines are the center stage of the subsea transportation system. Any offshore oil and gas projects constitute a long length of offshore pipelines. These are also known as sub-sea...

Continue Reading
link to Equipment Nozzle Loads and Means for Reducing Them

Equipment Nozzle Loads and Means for Reducing Them

Nozzle loads are the forces and moments that the piping system exerts on the equipment nozzles. One of the important qualification requirements while stress analysis of a piping system is to keep...

Continue Reading
« PREV Page 1 … Page 42 Page 43 Page 44 Page 45 Page 46 … Page 51 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping