Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Mechanical

link to Air Cooled Heat Exchangers (ACHE)

Air Cooled Heat Exchangers (ACHE)

Air Cooled Heat Exchangers (ACHE) are one of the heat exchanger types frequently used in Process, Power, Steel, and several other Industries where a process system generates heat that must be...

Continue Reading
link to What is Post Weld Heat Treatment (PWHT)? Its Procedure, Advantages, and Requirements

What is Post Weld Heat Treatment (PWHT)? Its Procedure, Advantages, and Requirements

Welding is a critical process in manufacturing and construction, but it can also introduce stresses and imperfections in the welded joints. To mitigate these issues, post-weld heat treatment (PWHT)...

Continue Reading
link to Vacuum Box Testing of Butt, Fillet, and Lap Weld

Vacuum Box Testing of Butt, Fillet, and Lap Weld

Vacuum box testing is a non-destructive examination (NDE/NDT) used for locating welding leaks. A vacuum box and a compressor create a high or low-pressure vacuum and a detergent solution is applied...

Continue Reading
link to What is Static Equipment? Types and List of Static Equipments

What is Static Equipment? Types and List of Static Equipments

The oil and gas industry is a complex and multifaceted sector that relies heavily on various types of equipment to ensure efficient and safe operations. All the equipment can be categorized into two...

Continue Reading
link to Piping Design Guide of Reactors

Piping Design Guide of Reactors

Reactor piping is very critical due to the high temperature and pressure of the fluids it carries. Reactors are used in the process units to contain catalysts. It promotes the chemical transformation...

Continue Reading
link to What is a Sour Service? | NACE Sour Service Criteria

What is a Sour Service? | NACE Sour Service Criteria

What is a Sour Environment? NACE defines a Sour environment as one that contains enough H2S either in the gaseous or aqueous media. Properties of Hydrogen Sulphide Chemical Formula:...

Continue Reading
« PREV Page 1 … Page 41 Page 42 Page 43 Page 44 Page 45 … Page 51 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping