Control Valve Sizing is a procedure of deciding the appropriate type and size of the control valve to optimally satisfy the requirements of fluid flow management. This article will describe the...
Category: Mechanical
A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads...
Piping Isometric Drawings | Symbols, How to Read, Software | Piping Isometrics
Once the three-dimensional (3D) model has been established in piping design software like PDS, PDMS, or SP3D, Piping Designers/Engineers need to convey that information to the yard for fabrication...
A Combined Cycle Power Plant (CCPP) is a highly efficient type of electricity generation facility that combines two distinct thermodynamic cycles, namely the Brayton cycle and the Rankine cycle, to...
Site selection for a plant is an important activity for any project. Careful considerations of various factors keeping in view the corporate objectives are required for any company. Such...
The Most Common Classification of Storage Tanks: Atmospheric Tanks, Low-Pressure, and Pressure Vessels. Why Tanks are Vented? The need for venting Tank Protection during normal...