Tee or Tee connection in piping engineering is a very important pipe fitting and is frequently used to combine or divide a flow. Two types of Tee are available, Equal Tee and Reducing Tee. However,...
Category: Piping Interface
Stub-in vs Stub-on | Differences between Stub-in and Stub-on Piping Connection
Stub-in and Stub-on are methods for making a fabricated branch connection from the pipe. Both types are permitted by many international codes and standards including ASME B31. However, both of these...
Introduction to Fire Protection System | Fire Fighting System
Importance of Fire Protection System Fire Protection systems are a very important part of safety in any operating plant as it provides a reasonable degree of protection to expensive equipment,...
A structural platform or civil platform is normally a horizontal surface at an elevated level usually provided for maintenance and easy access (operation) to required items such as valves,...
Field Welding, as the name specifies, is done outside the manufacturing shop where the outside environment is not controlled. As most of the time it is done on construction sites, it becomes very...
What is Underwater Welding? Underwater welding, as the name properly hints, is the welding inside the water. This is mainly used to repair offshore pipelines and structures, ships, submarines, and...