Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Engineering Materials

link to 15 Most Common Welding Defects, Causes and Remedies

15 Most Common Welding Defects, Causes and Remedies

Welding defects can be defined as unacceptable imperfections during the welding process. Any unacceptable deviation with respect to set technical and design requirements in the welding process is...

Continue Reading
link to Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry

Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry

Pipe Fittings are defined as the piping components that help in pipe routing for directional changes, size changes, and branch connections. Piping Elbows, Piping Reducers, Tee Connections, Olet...

Continue Reading
link to Threaded Connections in Piping: Threaded Pipe Fittings

Threaded Connections in Piping: Threaded Pipe Fittings

Threaded Connections are widely used for small bore piping having nominal diameters NPS 2 or smaller. This is the oldest pipe-joining method and is still highly popular. Threaded pipe fittings are...

Continue Reading
link to Butterfly Valves: Uses, Types, Working, Advantages, Symbols

Butterfly Valves: Uses, Types, Working, Advantages, Symbols

Butterfly valves belong to the quarter-turn rotational motion valves family and are used primarily to stop, regulate, or start the flow. The term "butterfly" in a butterfly valve is actually a disk...

Continue Reading
link to Magnetic Particle Inspection (MPI) Procedure

Magnetic Particle Inspection (MPI) Procedure

Magnetic Particle Inspection (MPI) is one of the most widely used non-destructive inspection methods for locating surface or near-surface defects or flaws in ferromagnetic materials. MPI is basically...

Continue Reading
link to Minimum Design Metal Temperature (MDMT) and Impact Test

Minimum Design Metal Temperature (MDMT) and Impact Test

Minimum Design Metal Temperature or MDMT is the lowest temperature that a piping system with specified material and thickness can withstand. While designing piping systems (equipment) in cold regions...

Continue Reading
« PREV Page 1 … Page 17 Page 18 Page 19 Page 20 Page 21 … Page 29 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping