Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Piping Stress Analysis

link to Interpretation of External Load On Nozzle Flange using PV Elite & Code Case 2901

Interpretation of External Load On Nozzle Flange using PV Elite & Code Case 2901

External loads on static equipment nozzle flange joints must be assessed in order to comply with code requirements. In general, except for the flanged joints at high temperatures, the external forces...

Continue Reading
link to Consideration of Flanged Elbow or Flanged Bend in Stress Analysis

Consideration of Flanged Elbow or Flanged Bend in Stress Analysis

What is a Flanged Elbow? Flanged pipe bends or flanged elbows are piping elbows connected with flange fitting to fitting. This means there is no spool or pipe piece in between the elbow endpoint(...

Continue Reading
link to What if Piping Continuation is Unknown? Part 1. Above Ground Piping

What if Piping Continuation is Unknown? Part 1. Above Ground Piping

What if Above Ground Piping Continuation is Unknown? The correct model and boundary conditions are very important for accurate piping stress analysis. Unfortunately, some inexperienced piping...

Continue Reading
link to What are Sustained and Expansion Stresses?

What are Sustained and Expansion Stresses?

In piping stress analysis, both the subject terms i.e, Sustained Stress and Expansion Stress are widely used. For all the piping systems which need analysis, the calculated sustained and expansion...

Continue Reading
link to ASME Section VIII Flange Leakage Checking Method in Caesar II

ASME Section VIII Flange Leakage Checking Method in Caesar II

My last two articles on flange leakage explain the basic theory behind flange leakage checking and methods for performing flange leakage checking using the pressure equivalent method. In this...

Continue Reading
link to Recent changes in ASME B31.3 and their implementation in CAESAR II

Recent changes in ASME B31.3 and their implementation in CAESAR II

This presentation is prepared by Mr. Deepak Sethia (working in Imagegrafix software) who has extensive experience in using Caesar II software and troubleshooting. The points that will be covered in...

Continue Reading
« PREV Page 1 … Page 30 Page 31 Page 32 Page 33 Page 34 … Page 36 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping