Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Process

link to Introduction to Clean Energy Piping & Pipeline Systems

Introduction to Clean Energy Piping & Pipeline Systems

The energy consumption of the world is increasing day by day. As per the energy requirements for the future, the energy production required will be in big capacity. The high-capacity energy...

Continue Reading
link to What is a Flare KOD | Working, Functions, Sizing, and Design of a Knock Out Drum

What is a Flare KOD | Working, Functions, Sizing, and Design of a Knock Out Drum

A Knock out drum is a specific type of pressure vessel in the flare header system used to remove & accumulate any condensed & entrained liquids or liquid droplets from the relief/flare gases....

Continue Reading
link to What is a Basis of Design or BOD? How to Write a Basis of Design for a Project?

What is a Basis of Design or BOD? How to Write a Basis of Design for a Project?

The Basis of Design (BOD) is a very important document for every project. The basis of design or project design basis provides all the principles, business expectations, criteria, considerations,...

Continue Reading
link to Significance of Space Velocity of Reactor

Significance of Space Velocity of Reactor

What is Space Velocity? In chemical engineering, space velocity refers to the Space velocity = flow rate of the feeds/ volume of the reactor (or volume of the catalyst) Space...

Continue Reading
link to PSIA vs PSIG: Differences | Conversion from PSIA to PSIG and PSIG to PSIA

PSIA vs PSIG: Differences | Conversion from PSIA to PSIG and PSIG to PSIA

PSI is the most basic unit for measuring pressure in the FPS unit system which is widely used in the United States and European countries. Most of household sporting goods, pressure transducers, etc...

Continue Reading
link to What is a Breather Valve? | Breather Valve for Tanks

What is a Breather Valve? | Breather Valve for Tanks

A breather valve is a special type of pressure and vacuum relief valve used to protect atmospheric and low-pressure tanks & vessels in which fluids are filled and drawn at a high flow rate....

Continue Reading
« PREV Page 1 … Page 10 Page 11 Page 12 Page 13 Page 14 … Page 25 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping