Caesar II Error “Could Not Open TEMPMAT”- Steps to Overcome it
Sometimes, while working with Caesar II software during opening a CAESAR II Piping Input file, many of you might have come across an error similar to the one shown in Fig. 1 (Could not open TEMPMAT)....
Air Cooled Heat Exchangers (ACHE) are one of the heat exchanger types frequently used in Process, Power, Steel, and several other Industries where a process system generates heat that must be...
What is Post Weld Heat Treatment (PWHT)? Its Procedure, Advantages, and Requirements
Welding is a critical process in manufacturing and construction, but it can also introduce stresses and imperfections in the welded joints. To mitigate these issues, post-weld heat treatment (PWHT)...
What is the Stress Intensification Factor or SIF? The term SIF (Stress Intensification Factor) is too confusing for many piping engineers. That's why the following article is taken to explain the...
Vacuum box testing is a non-destructive examination (NDE/NDT) used for locating welding leaks. A vacuum box and a compressor create a high or low-pressure vacuum and a detergent solution is applied...
Technical requirements for Pipes & Fittings for preparation of Purchase Requisition
While preparing the purchase requisition/inquiry of any piping component there are various points that need to be checked and confirmed with the vendor. The responsible requisition engineer should...
