Considerations for Project Site Selection

Site selection for a plant is an important activity for any project. Careful considerations of various factors keeping in view the corporate objectives are required for any company. Such considerations will finally make the plant economically and technologically viable and it will contribute to the environment. Strategic, long-term, and non-repetitive sound decisions are required. During the final decision-making, a certain degree of imaginative future planning will help to a great extent.

What are the factors for Site Selection?

Most of the time, the industrial development policies of the Government of the country where the plant will be situated dictate the allocation of the site. In addition to that, there are various other factors that need to be considered. A few such important factors are briefed in the following paragraphs.

Location Factor for Site Selection

The location factor is of utmost importance and requires careful consideration because of its long-term consequences. Any mistake during the selection of an appropriate location can be costly. Improper location comes with the following major problems:

  • A higher cost means higher investment.
  • Difficult marketing and transportation.
  • Dissatisfied and frustrated employees and consumers
  • Low availability of high-caliber professionals.
  • Frequent interruptions of production and
  • Abnormal wastage.

Also, once a plant is set up at a particular location, it is almost impossible to shift to a better location later because it will again involve numerous economic, political, and sociological reasons. Employee welfare, employment opportunities, etc are a few of the social reasons whereas, the pursuit of a policy of regional development and planning can be a political reason.

At the same time, The location factor needs the consideration of the following facilities.

District Classification

This will ensure that the license for locating the plant in a no-industry district is obtained.

READ  Flange Bolt Torque Calculation and Pipe Flange Bolt Torque Chart

Transportation Facilities

Proper transportation facilities linking with ports and railroads are crucial for the uninterrupted transfer of raw materials and end products. Airport-Connection is important for the easy movement of professionals. In case, foreign collaborations are involved in the plant, these points will be more crucial.

Availability of Manpower

Local access to skilled and semi-skilled manpower will add to the efficient construction and operation of the plant.

Industrial Infrastructure

Sufficient Industrial infrastructure will aid all supporting services required for the successful operation, maintenance, and repair of various machines and other items, availability of workshops, plant services, etc. that may not be feasible to be generated within the factory premises. The availability of communication facilities plays an important part in the infrastructure. Existing vibrant infrastructure in the vicinity is much preferred than the need-based infrastructure getting developed after the plant commissioning.

Community Infrastructure

As all the plants of modern times operate on sophisticated technology, it would be necessary to attract qualified professionals. This means, ensuring a good quality of living is a must. The availability of good schools and colleges, medical services, good communication facilities, cultural and recreational opportunities, etc will be required. Attracting qualified professionals will be very difficult in the absence of good community infrastructure.

Availability of Raw Water

The plant should be located in close proximity to an adequate quantity of water sources. Water will be required for plant operation and other non-plant activities. As the groundwater may be depleted at a future date, drawing the water by boring deep tube wells without the provision of a perennial source is not recommended. The Natural Water Table and flooding history need to be duly considered.

READ  What is an Oxidation-Reduction Potential (ORP)? How is it Measured?

Effluent Disposal

The drainage facility for the Effluent disposal must be examined. It would be economic if an effluent disposal facility after treatment is readily available. Otherwise, there may be legal and ecological consequences in transporting the effluent by drainage to a safe disposal area that far away.

Availability of Power

The required amount of uninterrupted and stable power (without fluctuations in voltage and frequency) for the successful operation of the plant is very crucial. The plant cost can be reduced by locating the plant near to power source.

Wind and Seismic Factors

Careful consideration of Prevailing wind direction, Maximum Wind Speed, and seismic history for the preferred site must be checked.

Availability of Industrial Gas

Nowadays, Industrial gas is the preferred source of energy for many plants as it is highly efficient and contributes very little towards industrial pollution. An uninterrupted power supply and a gas-based captive steam power generation unit are of great importance. Hence, the nearness of the site to a gas distribution network will be advantageous for long-term planning and future expansions.

Size and Nature of the Site for Selection

The plot area, the topography, the township facilities, and future expansions should meet the plant requirements. It is preferred if the grade level of the entire area is the same. In case, the plot area is not flat, it must be leveled to suit the plant’s requirements. The degree of required leveling and filling should be looked into from economic considerations.

Load-bearing capacity and acidity of the soil play a major role in the selection of the site. Filled soil has got less load-bearing capacity as compared to Natural Soil. As a consequence, the civil foundation will be economic in natural soil because piling to support heavy loads will not be needed whereas in a case-filled soil normally piling is required.

READ  Aluminum Extrusion: A Comprehensive Guide

Ecology and Pollution

Nowadays, there is a great deal of awareness of the maintenance of natural ecological balance. Regarding the effect of pollution from specific types of plants, social obligations are to be met. The nature of the site selected should preferably have some advantages to meet these requirements.

Quantitative Analysis

The above factors are considered at the time of site selection and the data collected are analyzed, generally by the weight-rating method, in order to finalize the recommendation of the potential site.

In the weight rating method, variable weights are assigned to each factor. Then each site is evaluated on a 0-5 sliding scale for each of these factors. The assignment of points for each site for each factor is obtained by multiplying the rating of the site by the weight of each factor.

The overall site rating is then obtained as the sum of the assigned points for each site. The recommendation will be for the site to have a maximum overall rating.

Few more Resources for you..
Piping Design and Layout
Piping Stress Analysis
Piping Materials
Piping Interface related articles

Anup Kumar Dey

I am a Mechanical Engineer turned into a Piping Engineer. Currently, I work in a reputed MNC as a Senior Piping Stress Engineer. I am very much passionate about blogging and always tried to do unique things. This website is my first venture into the world of blogging with the aim of connecting with other piping engineers around the world.

3 thoughts on “Considerations for Project Site Selection

  1. That’s good to know that manpower and workforce numbers can affect site selection for an industrial plant. My brother-in-law works for a company that’s trying to build a warehouse and the area is a little tricky. They may have to enlist site selection experts to help them understand factors like the ones you mentioned.

Leave a Reply to Kalpak koli Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts