This course is created by an experienced pipe stress analysis software developer (15+ years experience), Ph.D. and covers all features of onshore above ground and underground piping and pipeline...
Tag: mechanical design
Importance of Bourdon Effect, True and Effective Axial Force
Bourdon Effect on Pipelines Bourdon Effect is associated with the pressure elongation of the piping and pipeline systems. In piping and pipeline systems, elbows or bends are frequently used for...
A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads...
What if Piping Continuation is Unknown? Part 2. Underground Piping
Continued from Part 1 What if Underground Piping Continuation is Unknown? It is necessary to specify the correct boundary conditions while modeling main pipeline stations: valve station, pig...
Start-Prof can estimate the support loads and stresses caused by relief valve discharge by an equivalent static method. The relief valve discharge thrust load acts on elbow 28. In Start-Prof it...
Modeling Fired Heater Piping Connection is a bit tricky as the pipe is not welded to a fired heater shell similar to ordinary equipment. The heater has a hole, the pipe runs through that hole inside...