Fluid Flow is generally measured inferentially by measuring velocity through a known area. With this indirect method, the flow measurement is the volume flow rate ”Q” stated in its simplest...
Posts by Anup Kumar Dey
Pipeline Stress Analysis is quite different from normal plant piping stress analysis. Normally Pipelines run kilometers in length for transferring oil, gas, water, or sewer. There are two types of...
Process Datasheet Defines the suction and discharge conditions (Pressure, Temperature, Flowrate) and gas composition. The main input to the compressor vendor. Define all possible options of...
Material Selection & Quality Management for a Cross Country Pipeline
Cross Country Pipelines are very long-distance pipelines that run outside of the battery limit of the processing plants. The design of cross-country pipelines is governed by ASME B31.8 or ASME B31.4...
Introduction: During operation many times it happens that a piping system has to experience both hot and cold operating temperatures depending upon specific process requirements. In such...
Rotary Selector Valve (RSV) and Multi Phase Flow Meter (MPFM)
The Rotary Selector Valve or RSV was developed in the early 1900s for use in irrigation systems. By the late 1940s, the product found favor in the growing oil and gas industry throughout Texas...