Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Mechanical

link to Hazards of Cranes and Crane safety during Construction

Hazards of Cranes and Crane safety during Construction

Cranes are widely used and extremely powerful construction equipment that makes the life of a construction engineer easier. There is no substitute for cranes for lifting heavy products at great...

Continue Reading
link to What is Hot Tapping on Pipe?

What is Hot Tapping on Pipe?

Hot Tap or Pipe Hot Tapping is a proprietary method for adding a branch connection to a “hot” or operating line.  The hot Tapping process allows a connection into a pressurized in-service...

Continue Reading
link to What is Corrosion Under Insulation (CUI)?

What is Corrosion Under Insulation (CUI)?

What is Corrosion Under Insulation (CUI)? The Corrosion Under Insulation (CUI) war has been fought for many years in the chemical and petrochemical industry. Corrosion Under Insulation is severe...

Continue Reading
link to Piping Design Guidelines for Horizontal Drums

Piping Design Guidelines for Horizontal Drums

Drums are cylindrical vessels that are used in the process units for a variety of functions. These include intermediate liquid collection, product storage, separation of two different products of...

Continue Reading
link to Process Design of Centrifugal Compressor System

Process Design of Centrifugal Compressor System

Process Datasheet Defines the suction and discharge conditions (Pressure, Temperature, Flowrate) and gas composition. The main input to the compressor vendor. Define all possible options of...

Continue Reading
link to 10 Considerable Points for Pressure Vessel Nozzle Load Tables

10 Considerable Points for Pressure Vessel Nozzle Load Tables

Every EPC company must have project-specific pressure vessel nozzle loading tables which are used for comparing allowable nozzle loads for vessels, columns or towers, heat exchangers, Drums, or any...

Continue Reading
« PREV Page 1 … Page 43 Page 44 Page 45 Page 46 Page 47 … Page 51 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping