Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Piping Interface

link to Guidelines for Sizing of Restriction Orifice for Single-phase Fluids

Guidelines for Sizing of Restriction Orifice for Single-phase Fluids

In our last article, we discussed restriction orifices in detail. The same article also lists the important factors on which the sizing of a restriction orifice depends. Click here to recapitulate...

Continue Reading
link to Pipeline Virtual Anchor Length Calculation

Pipeline Virtual Anchor Length Calculation

What is Virtual Anchor Length? A pipeline restrained by fixed anchors will experience a series of stresses including longitudinal, bending, and axial. Virtual anchor lengths are taken as the...

Continue Reading
link to Storage Tank design using TANK software and re-rating with API 620 & API 579

Storage Tank design using TANK software and re-rating with API 620 & API 579

Designing storage tanks are a critical activity. Various parameters need to be considered during design. In recent times the design of storage tanks is automated using various software. In this...

Continue Reading
link to Sun Shades for the Oil and Gas Industry and their Design

Sun Shades for the Oil and Gas Industry and their Design

In the oil and gas industry, a sunshade is a device that is used to protect workers, equipment, and instrumentation from direct sunlight and heat. Sunshades are commonly used in areas where there is...

Continue Reading
link to Internal Pipe Coating | FBE Coating | Glass-Flake Coating | PE & ROTO Lining

Internal Pipe Coating | FBE Coating | Glass-Flake Coating | PE & ROTO Lining

Internal pipe coating is a crucial process in the field of pipeline infrastructure, particularly in industries like oil and gas, water supply, and chemicals. It involves the application of protective...

Continue Reading
link to DeSalting and Dehydration of Crude Oil

DeSalting and Dehydration of Crude Oil

Desalting and Dehydration processes are crucial in the oil industry to prepare crude oil for refining and ensure the quality and safety of the final products. This comprehensive guide will cover...

Continue Reading
« PREV Page 1 … Page 59 Page 60 Page 61 Page 62 Page 63 … Page 66 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping