Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Start-Prof

link to How to import an AVEVA E3D or PDMS model into START-PROF Piping Stress Analysis Software

How to import an AVEVA E3D or PDMS model into START-PROF Piping Stress Analysis Software

What is AVEVA E3D E3D and PDMS are some of the frequently used plant design software developed by AVEVA. The Stress Analysis Software Start-Prof provides import and export features that are...

Continue Reading
link to How to import a CADWorx model into START-PROF Piping Stress Analysis Software

How to import a CADWorx model into START-PROF Piping Stress Analysis Software

What is CADWorx CADWorx is one of the frequently used plant design software developed by Hexagon. It creates a semi-intelligent model using a specification based application. Since this...

Continue Reading
link to How to Avoid Zero Anchor Loads from Piping

How to Avoid Zero Anchor Loads from Piping

Why Software may show Zero Anchor Loads? While stress analysis and supporting considerations it is always a better engineering practice to provide line stops or axial stops or pipe anchors at the...

Continue Reading
link to Several ASME B31 & EN 13480 Issues Needed to Know for Pipe Stress Engineer

Several ASME B31 & EN 13480 Issues Needed to Know for Pipe Stress Engineer

Axial Stress from Pressure Load, Axial Force and Torsion Moment This issue leads to serious under-estimation sustained and expansion stresses in pipes and fittings in ASME B31.1-2018, ASME...

Continue Reading
link to Smart Tee Model considerations in START-PROF

Smart Tee Model considerations in START-PROF

What is the Tee branch connection? A tee branch connection is a type of piping fitting that allows for the branching of a pipeline into two or more directions, typically at a 90-degree angle. This...

Continue Reading
link to What is Thermal Bowing?

What is Thermal Bowing?

The thermal bowing phenomenon occurs when a horizontal pipe is filled partially by hot or cold fluid (LNG). Many thermal bowing occurrences cause unexpected damage to the piping or supporting...

Continue Reading
« PREV Page 1 Page 2 Page 3 Page 4 Page 5 … Page 8 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping