Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Mechanical
  • Process
  • Piping Interface
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Health & Safety
    • Inspection and Testing
    • Maintenance
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Start-Prof

link to Beijing Universal Amusement Park Buried Hot Water Piping Network Project in PASS/START-PROF

Beijing Universal Amusement Park Buried Hot Water Piping Network Project in PASS/START-PROF

Brief Project Description Universal Studios Beijing is an upcoming Universal theme park that will open in Spring 2021 as part of Universal Beijing Resort. The park would become the fifth...

Continue Reading
link to Webinar Recording of “PASS/START-PROF Pipe Stress Analysis”

Webinar Recording of “PASS/START-PROF Pipe Stress Analysis”

The much-awaited PASS/START-PROF Pipe Stress Analysis Webinar Recording is now Available! The important points that are covered in the session are: Agenda of the Webinar Brief START-PROF...

Continue Reading
link to Several ASME B31 & EN 13480 Issues Needed to Know for Pipe Stress Engineer

Several ASME B31 & EN 13480 Issues Needed to Know for Pipe Stress Engineer

Axial Stress from Pressure Load, Axial Force and Torsion Moment This issue leads to serious under-estimation sustained and expansion stresses in pipes and fittings in ASME B31.1-2018, ASME...

Continue Reading
link to Smart Tee Model considerations in START-PROF

Smart Tee Model considerations in START-PROF

This article provides guidelines for modeling Tee or branch connections using Software START-PROF. The guideline covers modeling for both the Standard Tee and Non-Standard Tee Connection. Modeling...

Continue Reading
link to What is Thermal Bowing? (with PDF)

What is Thermal Bowing? (with PDF)

The thermal bowing phenomenon occurs when a horizontal pipe is filled partially by hot or cold fluid (LNG). Many thermal bowing occurrences cause unexpected damage to the piping or supporting...

Continue Reading
link to Modular Design- How to do a Piping Stress Analysis (PDF)

Modular Design- How to do a Piping Stress Analysis (PDF)

The idea of modular design is as follows: The complex piping system is divided into several modules that are mounted on a frame structure. Modules can be transported to the site and joined to each...

Continue Reading
« PREV Page 1 … Page 3 Page 4 Page 5 Page 6 Page 7 … Page 12 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced piping engineer for the last 19 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2023 Copyright What is Piping