The local primary membrane stress (PL) is the stress generated due to a primary type load such as weight or pressure, but that is localized around a discontinuity such as a nozzle in a...
Piping Design
Who is a Piping Design Engineer or Piping Designer or Piping Layout Engineer?
Piping Design Engineers, Piping Layout Engineers, or Piping Designers are piping professionals who design the piping network of the complete plant. Piping Designing means deciding the overall plant...
Control Valve Sizing is a procedure of deciding the appropriate type and size of the control valve to optimally satisfy the requirements of fluid flow management. This article will describe the...
A Lifting lug is a plate with a hole in it. As the term specifies, lifting lugs are used for lifting. The hole is sized to fit a clevis pin. Using lifting lugs combined with the clevis pins, loads...
Piping Isometric Drawings | Symbols, How to Read, Software | Piping Isometrics
Once the three-dimensional (3D) model has been established in piping design software like PDS, PDMS, or SP3D, Piping Designers/Engineers need to convey that information to the yard for fabrication...
In piping instrumentation, LC and LG refer to two different types of level measurement devices: LC: LC stands for "level controller" or "level control switch". This is a device that is used to...