What is a Wing Nut? Its Working, Types, Materials, Applications, Advantages

Nuts are one of the most widely used common types of fasteners. Wing-nut is a type of nut having two large metal wings to tighten or loosen using the hands. Wingnuts are also popularly known as butterfly nuts. Wing-nuts consists of a metal piece with a threaded hole. To hold two or more objects together, they are used with a wing bolt or wing screw. To assemble, the wing bolt is inserted through the objects, after which a wingnut is inserted on the end of the bolt and tightened by turning it. ASME B18.17 or DIN 315 provides the specifications relating to wing nuts (Fig. 1).

Characteristics of Wing Nuts

  • The metal wings characterize this special type of not. They got their name from the presence of the tabs or wings.
  • Usually, they are hexagonal in shape.
  • Wingnuts have internal threads to engage with a bolt.
Typical Wing Nuts
Fig. 1: Typical Wing Nuts

Working of Wing Nuts

The working of wingnuts is similar to other nuts. The basic function of holding two or more objects together is achieved when assembling the nut and bolt together. The main advantage of wing nuts lies in their easy installation and removal procedure. The presence of wings in wingnuts, help operators to grip and tighten easily. Wing nuts protrude from an integral round base with a flat bearing surface and are placed 180 degrees apart.

READ  Ductile Iron Pipe Dimensions

Types of Wing Nuts

Wingnuts are classified based on style and manufacturing method. ASME B18.6.9 classifies wing nuts into the following four types.

Wing Nut TypesManufacturing MethodRemarks
Type ACold-forged or cold-formedType A wing nuts are produced in regular, light, and heavy dimensional series
Type BHot forgedType B wingnuts are available in three different wing styles.
Type CDie-castType C wing nuts are produced in regular, and heavy dimensional series
Type DSheet metal stampedType D wingnuts are available in three different wing styles.
Table 1: Types of Wing Nuts

Stamped wing nuts have hollow wings that are open at the top while cold-forged wing nuts are solid parts.

Materials of Wing Nuts

Wing nuts can be manufactured from various materials. Some of the common materials are stainless steel, copper, brass, aluminum, plastic, steel, and other ferrous alloys. They may be zinc plated to increase corrosion resistance.

Size of Wing Nuts

The nominal thread diameter decides the size of a wing nut. Common sizes range from about #6 to 3/4″. Sizes less than 1/4″ are listed as a number size while sizes that are 1/4″ and larger are specified in inches, usually fractional rather than decimal. Not all types are available in all sizes. With the size of the wing nut, their dimensions vary. The following table in Fig. 2 provides typical dimensions of wing nuts.

Wing nut dimensions
Fig. 2: Wing nut dimensions

Application of Wing Nuts

Wing nuts are suitable for parts requiring frequent assembly and disassembly. They are mostly used for applications requiring less torque as wing nuts are hand-turned without using any tool. Depending on the application requirement, wing nuts can have a standard or metric thread. Common applications of wing nuts include:

  • Car batteries
  • Furniture
  • Bicycle wheels
  • Drum kits
  • Boat accessories, etc
READ  What is ASME Certification? Procedure for ASME Certification and the ASME Certification Mark

Advantages of Wing Nuts

Wing nuts provide a number of benefits like:

  • Easy engagement and removal.
  • Lower torque requirement for tightening.
  • Easy tightening by hand without the need for a tool.
  • Usually does not require heat treatment.
  • Wingnuts can be used with or without washers.

Disadvantages of Wing Nuts

However, there are a few drawbacks of wing nuts. Some of the disadvantages are:

  • Not suitable for vibrating applications.
  • Not suitable for heavy load applications.

Anup Kumar Dey

I am a Mechanical Engineer turned into a Piping Engineer. Currently, I work in a reputed MNC as a Senior Piping Stress Engineer. I am very much passionate about blogging and always tried to do unique things. This website is my first venture into the world of blogging with the aim of connecting with other piping engineers around the world.

4 thoughts on “What is a Wing Nut? Its Working, Types, Materials, Applications, Advantages

    1. I’ma attaching angle iron to angle iron. One of the pieces may be subject to considerable stress. I would like to use a wing nut. Your site states they are not for heavy use…but isn’t it the bolt that is subject to the stress and not the wing nut?

Leave a Reply to Navaneethan Shanmuga Sundaram Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts