Before connecting the process gas pipings with compressor nozzles, the shaft alignment work for the compressors and driver shall be carried out to ensure their concentricity. This concentricity...
Posts by Anup Kumar Dey
Shell & Tube Heat Exchanger Piping | Online Course on Drums/Exchanger Layout & Stress Analysis
Shell & Tube Heat Exchangers are the most frequently used Heat Exchangers in Process Plants. The purpose of this presentation is to provide guidelines for Shell & Tube Heat Exchanger Piping...
Considerations for Hydrostatic Field Test of GRE lines The hydrostatic field test or hydraulic test on the GRP/GRE line, or on the section of it, is required to verify the hydraulic sealing of the...
A Pump or Pumping system is the major equipment in any process or power plant. So the equipment should operate properly to give the best output in terms of performance. However, there are many...
EOT (Electric Overhead Traveling) Cranes and Hoist are industrial machines that are mainly used for materials movements in construction sites, production halls, assembly lines, storage areas, power...
Prior to commissioning, it is essential to thoroughly clean the internal surfaces of pipes. This cleaning process, known as steam blowing, is used to remove rust, dust, scales, and debris. If this...