Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Mechanical
  • Process
  • Piping Interface
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Health & Safety
    • Inspection and Testing
    • Maintenance
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Piping Design Basics

link to Technical requirements for Pipes & Fittings for preparation of Purchase Requisition (With PDF)

Technical requirements for Pipes & Fittings for preparation of Purchase Requisition (With PDF)

While preparing the purchase requisition/inquiry of any piping component there are various points which need to be checked and confirmed with the vendor. The responsible requisition engineer should...

Continue Reading
link to Checklist for Piping Stress Analysis using Caesar II (With PDF)

Checklist for Piping Stress Analysis using Caesar II (With PDF)

In most of the organization, there is a 3 tier checking process for every stress system for maintaining the quality of analyzed stress systems. Normally stress system is performed by one (junior or...

Continue Reading
link to Piping Design Guide of Reactors (With PDF)

Piping Design Guide of Reactors (With PDF)

Reactor piping is very critical due to the high temperature and pressure of the fluids it carries. Reactors are used in the process units to contain catalysts. It promotes the chemical transformation...

Continue Reading
link to What is a Sour Service? | NACE Sour Service Criteria (PDF)

What is a Sour Service? | NACE Sour Service Criteria (PDF)

What is a Sour Environment? NACE defines a Sour environment as one that contains enough H2S either in the gaseous or aqueous media. Properties of Hydrogen Sulphide Chemical Formula:...

Continue Reading
link to Plastic Piping System: Types of Plastic Pipes (With PDF)

Plastic Piping System: Types of Plastic Pipes (With PDF)

As the name implies, plastic pipes are made of plastic materials. Due to many advantages, plastic pipes are ideal choice in many piping and plumbing solutions. In fighting corrosion, plastic pipes...

Continue Reading
link to Damaging effects of Low-Velocity Flow In Piping And Pipelines (With PDF)

Damaging effects of Low-Velocity Flow In Piping And Pipelines (With PDF)

Is Low-Velocity Flow Bad? Many of you are aware that high velocities in piping and pipelines lead to many operational and maintenance issues like vibration, noise, pipe material erosion, and a...

Continue Reading
« PREV Page 1 … Page 49 Page 50 Page 51 Page 52 Page 53 … Page 62 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced piping engineer for the last 19 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2022 Copyright What is Piping