Process Datasheet Defines the suction and discharge conditions (Pressure, Temperature, Flowrate) and gas composition. The main input to the compressor vendor. Define all possible options of...
Category: Piping Interface
Material Selection & Quality Management for a Cross Country Pipeline
Cross Country Pipelines are very long-distance pipelines that run outside of the battery limit of the processing plants. The design of cross-country pipelines is governed by ASME B31.8 or ASME B31.4...
Rotary Selector Valve (RSV) and Multi Phase Flow Meter (MPFM)
The Rotary Selector Valve or RSV was developed in the early 1900s for use in irrigation systems. By the late 1940s, the product found favor in the growing oil and gas industry throughout Texas...
Process Engineering Deliverables for EPC of Oil and Gas Industries
Process Engineering Department is the main driver of any EPC Engineering Group. Because they provide information related to the actual process of what is going to happen. Other downstream departments...
10 Considerable Points for Pressure Vessel Nozzle Load Tables
Every EPC company must have project-specific pressure vessel nozzle loading tables which are used for comparing allowable nozzle loads for vessels, columns or towers, heat exchangers, Drums, or any...
This presentation is prepared by Mr. Deepak Sethia who is working in ImageGrafix Software FZCO, the Hexagon CAS Global Network Partner in the Middle East and Egypt. He has extensive experience in...