Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Process

Process Engineering Deliverables for EPC of Oil and Gas Industries

Process Engineering Department is the main driver of any EPC Engineering Group. Because they provide information related to the actual process of what is going to happen. Other downstream departments...

Continue Reading
link to AFT Impulse Pulsation Frequency Analysis (PFA) Module

AFT Impulse Pulsation Frequency Analysis (PFA) Module

This presentation is prepared by Mr. Deepak Sethia who is working in ImageGrafix Software FZCO, the Hexagon CAS Global Network Partner in the Middle East and Egypt. He has extensive experience in...

Continue Reading
link to Elevated Flare systems used in Process Industries

Elevated Flare systems used in Process Industries

What is an Elevated Flare System? The elevated flare system consists of a flare header, a knock-out drum, and a flare stack. The waste gas and condensate are collected from the whole plant through...

Continue Reading
link to Types of Pressure-Relieving Devices for Protection from Overpressure

Types of Pressure-Relieving Devices for Protection from Overpressure

Pressure Relieving Devices or PRDs are devices used in chemical, petrochemical, and power industries to prevent equipment from over-pressurization. As per the design requirements, these...

Continue Reading
link to Understanding Centrifugal Compressor Surge and Control

Understanding Centrifugal Compressor Surge and Control

Meaning of Centrifugal Compressor Surge Centrifugal compressor surge is a characteristic behavior of the compressor that occurs in situations when inlet flow is reduced and the compressor head...

Continue Reading
link to Emergency Response Procedures and Measures for Process Units

Emergency Response Procedures and Measures for Process Units

This article covers the design consideration of emergency response procedures and measures in petroleum refineries, chemical plants, and similar plants. This can be used in conjunction with the Job...

Continue Reading
« PREV Page 1 … Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping