The outermost surface of any metal is the most important area as it suffers from direct impact and abrasion while in operation. So, it is always desirable to make the metal surface...
Posts by Anup Kumar Dey
What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
Normalizing is a widely popular heat treatment process for metals to increase ductility and toughness. This heat treatment is also known as normalizing annealing as the normalizing heat treatment...
Annealing is one of the most popular heat treatment methods to alter the mechanical properties of metals and alloys. Annealing is mostly used to increase the ductility of a material and to reduce the...
What is a Thrust Block? It’s Design, Construction, Types, Working, Differences with Anchor Block
A thrust block is a concrete pipe restraint that prevents the mainline from moving by transferring pipe loads (mainly due to pressure thrust) to a wider load-bearing surface. Usually, thrust blocks...
What is Viscosity? | Factors Affecting Viscosity | Newton’s law of Viscosity
"What is viscosity?" is an often-asked term in fluid mechanics. Viscosity is a fluid property and is very important for studying fluid flow behavior. All kinds of fluids, whether they are in a liquid...
Pipelines are used to transport gas, water, oils, and other liquids from one point to the other. And as all pipes are produced at a fixed length, there is a requirement of welding to join pipes and...