Skip to content
piping engineers blog
Search
  • Piping Design & Layout
  • Piping Stress Analysis
    • Piping Stress Basics
    • Caesar II
    • Start-Prof
  • Piping Supports
  • Piping Interface
    • Mechanical
    • Process
    • Instrumentation
    • Pipeline
    • Civil
    • Project Management
    • Construction
    • Plumbing
    • Health & Safety
    • Inspection and Testing
    • Maintenance
    • Oil and Gas-Energy
  • Engineering Materials
  • PDMS-E3D
    • PDMS
    • E3D
    • SP3D

Category: Pipeline

link to What is Flange Facing? Working and Types of Flange Facing Machines

What is Flange Facing? Working and Types of Flange Facing Machines

To ensure that old flanges continue to work smoothly without any issues with their joint integrity flange facing is required to be performed. Flange facing is a machining service on flange surfaces...

Continue Reading
link to Snow and Ice Loading on Piping Systems

Snow and Ice Loading on Piping Systems

Snow and Ice loading is an environmental load and must be considered in pipe stress analysis where the climatic condition specifies the possibility of snow or ice formation. Piping projects in...

Continue Reading
link to What is an RTJ Flange? | Ring Type Joint Flanges

What is an RTJ Flange? | Ring Type Joint Flanges

An RTJ flange or Ring Type Joint Flange is one of the various types of flanges used widely in piping and pipeline industries. RTJ flanges are commonly used for high-pressure and high-temperature...

Continue Reading
link to Hydrogen Piping and Pipeline Systems | ASME B31.3 vs ASME B31.12

Hydrogen Piping and Pipeline Systems | ASME B31.3 vs ASME B31.12

For more than 50 years, Hydrogen piping and pipeline systems have been in use. There are several hundred miles of hydrogen pipelines that are laid to transport hydrogen to serve as fuel. Even though...

Continue Reading
link to What are Flowlines in Oil and Gas? Differences between Flowlines and Pipelines

What are Flowlines in Oil and Gas? Differences between Flowlines and Pipelines

Pipeline engineers must have heard the term "flowlines" frequently. In the oil and gas industry, Flowlines transport fluids between a wellhead and a gathering station like RMS or MSV or treatment...

Continue Reading
link to What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing

What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing

Normalizing is a widely popular heat treatment process for metals to increase ductility and toughness. This heat treatment is also known as normalizing annealing as the normalizing heat treatment...

Continue Reading
« PREV Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 … Page 16 NEXT »

About Me

Hi There! Welcome to my space, I am Anup Kumar Dey, an experienced Piping and Pipeline engineer for the last 20 years. Through this platform, I will share my experiences and knowledge with you in an innovative way. So be with me for the next couple of years!

  • CONTACT
  • ABOUT
  • PRIVACY
  • ADVERTISE
  • DISCLAIMER
© 2025 Copyright What is Piping