Pages:
Posts:
-
Topic: Caesar II
- What’s New in Caesar II-Version 14?
- Complete Pipe Stress Analysis using Caesar II Online Course (30+ Hours)
- Caesar II Version 13 is Releasing! Take a Look at the Extended Capabilities it will Provide
- How to Deal with Local Primary Membrane Stresses?
- An Overview of Linear and Non-Linear Analysis in Piping Stress Calculations
- Allowable Stress for Pressure Relieving Reaction Load vs Occasional load
- Top Pipe Stress Analysis Software Packages for 2024
- An Issue about USER DEFINED SIFs
- Introduction to Finite Element Analysis or FEA
- AutoPIPE vs CAESAR II: Differences between CAESAR II & AUTOPIPE
- What is Time History Analysis? Steps with example
- Is Pipe Stress-Range Calculated Correctly?
- Air Cooler Piping Stress Analysis using Caesar II
- Overview of Lateral Buckling and Upheaval Buckling of Pipelines
- Stress Classification in Pressure Vessels and Piping as per ASME B31 and BPVC Codes
- Importance of Bourdon Effect, True and Effective Axial Force
- Creep Rupture Usage Factor for Allowable Variations in Elevated Temperature Service
- Caesar II Version 12 vs Caesar II Version 11
- Stress Analysis of Surface Laid Pipelines
- Stress Intensity Factor (SIF), Flexibility Factor: ASME B31.3 vs ASME B31J
- Turbine Piping: Definition, Working Philosophy, Layout Consideration, Stress Analysis, NEMA SM 23
- Spring Hanger Pipe Support Selection Procedure for Piping Stress Analysis
- Water Pumping Station Piping Stress Analysis using Flexible Sleeve Coupling
- Heat Exchanger Modeling in Caesar II and Stress Analysis
- Details about Intergraph Smart Licensing Platform for Caesar II (PDF)
- Recorded Webinar on Expansion Joints in CAESAR II
- Piping Thermal Bowing Consideration in Caesar II with an Example
- Stress Analysis of PSV/PRV Piping Systems Using Caesar II | PSV Piping Stress Analysis
- Methods for Checking Flange Leakage | Flange Leakage Calculation | Flange Leakage Analysis
- Load Cases for Pipe Stress Analysis: Caesar II Load Cases
- Applicability of Caesar II for stress analysis of lines having D/t ratio more than 100
- What is Thermal Bowing?
- Pipe Stress Analysis Report Preparation for Issuing to the Client
- Modeling of Sway Braces in Caesar II for stress analysis
- Flange Leakage Checking by Pressure Equivalent Method in Caesar II
- Details about CAESAR II Error: “Material is Outside the Temperature Range”.
- Stress Analysis of GRP / GRE / FRP Piping System Using Caesar II (ISO 14692)
- Methods for WRC 107 (WRC 537) and WRC 297 Checking in Caesar II
- Stress Analysis of Vertical Reboiler Piping using Caesar II
- Pipe Trunnion or Dummy Support and Their Stress Calculation
- Caesar II Error “Could Not Open TEMPMAT”- Steps to Overcome it
- Does Friction Forces Exist in Cold State of Piping or Not?
- Checklist for Piping Stress Analysis using Caesar II
- Stress Analysis Features of the Tall Pipe Risers
- Spring Hanger Selection and Design Guidelines in Caesar II
- Snubber Modelling in Pipe Stress Analysis in Caesar II
- Static Method of Wind Analysis of Piping systems in Caesar II using Pressure Vs elevation Method
- Equipment Nozzle Loads and Means for Reducing Them
- CAESAR II and START-PROF Verification
- Stress Analysis of Centrifugal Compressor Connected Piping Systems using Caesar II
- Flange Leakage Evaluation based on NC 3658.3 Method method using Caesar II
- Free Trial Version of Pipe Stress Analysis Software and Online Pipe Stress Analysis Training Course with Certificate
- Hot Sustained Stress (Lift-Off) Checking in Caesar II
- Slug Flow Analysis Using Dynamic Spectrum Method in Caesar II
- What is Restrained and Unrestrained Pipes: Part 2
- Pipeline Stress Analysis
- What is Restrained and Unrestrained Pipes: Part 1
- 10 Considerable Points for Pressure Vessel Nozzle Load Tables
- Tutorial: API 610 module of Caesar II software
- Understand the Harmonic Analysis and Ensure the Pressure pulsation comply with API 674
- Procedure to Restore the Corrupted Caesar II File
- Advantages of using Coordinate System in Caesar II
- Stress Analysis of Pump Piping (Centrifugal) System using Caesar II
- How to Open CAESAR II File in START-PROF?
- Basics for Stress Analysis of Underground Piping using Caesar II
- Jacketed Piping: Definition, Types, Design Considerations, and Stress Analysis
- CAESAR II vs START-PROF Piping Stress Analysis Software Comparison
- Underground Piping Stress Analysis Procedure using Caesar II
- What if Piping Continuation is Unknown? Part 2. Underground Piping
- Advantages of using Block Operation in Caesar II
- What is Slug Flow? Steps for Slug Flow Analysis
- Modeling Relief Valve (Pressure Safety Valve) Thrust force
- Stress Analysis of Column piping system using Caesar II
- Seismic Analysis of Piping Systems: Earthquake Analysis
- Stress Analysis of Flare Piping Systems
- What is Pipe Stress Analysis? A Comprehensive Guide
- Modeling Connection to Fired Heater
- How to Model Slug Flow Loads
- Buried Pipe Stress Analysis Basics and Online Course
- Consideration of Flanged Elbow or Flanged Bend in Stress Analysis
- What if Piping Continuation is Unknown? Part 1. Above Ground Piping
- What are Sustained and Expansion Stresses?
- ASME Section VIII Flange Leakage Checking Method in Caesar II
- Recent changes in ASME B31.3 and their implementation in CAESAR II
- ASME B31J & B31J Essentials: Why these are useful in Piping Stress Analysis?
- Fatigue Analysis: Definition, Methods, Types, Reasons, Failure Criteria, Caesar II Case Study
- What Is Modal Analysis and Why Is It Necessary? Caesar II Piping Modal Analysis Steps
- Pump-Piping Alignment Check Methodology using Caesar II
- Rigid Struts- Definition, Applications, and Modeling in Caesar II
- Major features of CAESAR II-2019, Version 11.00
- Procedure for Converting a Higher version Caesar II file into its Lower version
- Top 180+ Piping (Stress) Interview Questions with Answers
-
Topic: Civil
- What is a Link Seal? Its Advantages, Applications, Sizing, Working, and Installation
- Types of Loads on Structures: An In-Depth Guide
- What is Structural Resonance? Its Effects and Mitigation Options
- What is Structural Design? Objectives and Stages of Structural Design
- Floor Gratings: Types, Advantages, Materials, Applications
- International Building Code (IBC): A Comprehensive Guide
- Top 8 Civil and Structural Engineering Design and Analysis Software Tools for 2024
- What is Grouting in Civil Construction? A Comprehensive Guide
- Through Bolting for Secure Connections: Anchor Bolts vs Through Bolts
- What are Concrete Anchors? Their Applications, Materials, and Types
- Role of Civil Engineers in the Oil and Gas Sector
- What is a Septic Tank? Types, Working and Maintenance of Septic Tank Systems
- Types of Lines in Engineering/ Technical Drawings and Their Uses
- What is Metal Grating? Types and Uses of Metal Gratings
- Types of Structural Steel Shapes
- What is Structural Steel Fabrication? Its Process Stages, Uses, Advantages
- Types of Anchor Bolts: Their Selection and Uses
- What is a Pipe Sleeve? Its Functions, Materials, and Uses
- A36 Steel | Composition, Applications, and Properties of ASTM A36 Steel
- What is Tensile Strength? Tensile Strength of Steel and Other Materials
- Types of Steel | Grades of Steel
- What is a Thrust Block? It’s Design, Construction, Types, Working, Differences with Anchor Block
- Wastewater Treatment: Definition, Process Steps, Design Considerations, Plant Types
- Heat Affected Zone (HAZ): Definition, Causes, Effects, Color Bands, Reduction
- Brittle Fracture and Ductile Fracture: Definition, Mechanism, Differences
- H-beam vs I-beam: Major Differences | H-beam and I-beam Size Chart
- Types of Construction Equipment for Oil & Gas Projects
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- Maximum Shear Stress Theory: Tresca Theory of Failure
- What is a Topographic Survey? | Cost of Topographic Survey
- Brownfield vs Greenfield: Differences Between Brownfield and Greenfield Oil and Gas Projects
- Moment of Inertia: Introduction, Definition, Formula, Units, Applications
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- Factor of Safety: Definition, Equation, Examples, Calculator
- Free Body Diagram: Definition, Purpose, Examples, Steps
- Hooke’s Law: Statement, Equation, Graph, Applications, Limitations
- Introduction to Stress-Strain Curve
- Scaffolding Definition: Types, Parts, Design, Materials, and Hazards of Scaffolding
- Bolted Steel Tanks | Design and Construction
- What is Fireproofing? Types, Materials, Methods
- Engineering Deliverables for Chemical, Oil & Gas Projects
- Pressure vs Stress: Differences Between Pressure and Stress
- Types of Structural Platforms
- Overview of Pile Foundation Design
- An article on Tank Pad Foundation
- Sun Shades for the Oil and Gas Industry and their Design
- Considerations for Project Site Selection
- What Is Modal Analysis and Why Is It Necessary? Caesar II Piping Modal Analysis Steps
- Bracing Connections/Cross-bracing Design Example
- Checking of Design | Design Checking | Design Checklist
- Importance & Impact of Stress Intensification Factor (SIF) in Piping
-
Topic: Construction
- What is a Turnbuckle? Its Types, Materials, Application, and Installations
- Welding Inspectors: CSWIP and AWS-CWI
- What is a Pipe Spool and Why is it Important?
- Material Handling Systems in Construction
- How to Weld Galvanized Steel? Risks Associated with Galvanized Steel Welding
- What is Tube Bending? Working, Types, Applications of Tube Bending
- What is a Link Seal? Its Advantages, Applications, Sizing, Working, and Installation
- What is a Golden Joint? Meaning, Application, and Code Requirements
- Pipe Bevelling Machines and Tools: Types and Applications
- What is Pipe Bevelling? Its Definition, Types, Importance, Methods
- What are Tube Benders? Their Types, Components, Applications, and Selection
- What is a Concrete Pump? Its Working, Types, and Applications
- The Steps of Manufacturing of Pressure Vessels
- Understanding Commissioning: A Crucial Process in the Oil and Gas Industries
- What is a Pipe Shaver? Working and Specification of Fiberglass Pipe Shavers
- Pipe Fabrication Shops in Piping Construction for Oil and Gas Industries: Shop Fabrication vs Site Fabrication
- What is Fillet Welding? Its Parts, Types, Applications, Symbols, and Differences with Butt Welding
- What Are As-Built Drawings? Construction Drawings vs As-Built Drawings
- What is an Excavator? Applications and Types of Excavators
- What is a Septic Tank? Types, Working and Maintenance of Septic Tank Systems
- What is a Boom Lift? Applications, Sizes, and Types of Boom lifts
- Types of Lines in Engineering/ Technical Drawings and Their Uses
- What is Metal Grating? Types and Uses of Metal Gratings
- What is a Forklift? Working and Types of Forklifts for the Construction Industry
- Types of Structural Steel Shapes
- How to Calculate Weight of a Steel Plate? Steel Plate Weight Calculator
- What is Structural Steel Fabrication? Its Process Stages, Uses, Advantages
- What is a Sideboom PipeLayer?
- What are Pickling and Passivation? Their Meaning, Procedure, Advantages, and Differences
- Types of Anchor Bolts: Their Selection and Uses
- What are Inch-Dia and Inch-Meter in Piping? Their Significance, Calculation, and Examples
- What is Cold Cutting? Types of Cold Cutting Machines
- P-Number, F-Number, and A-Number in Welding
- What is Flange Facing? Working and Types of Flange Facing Machines
- What is Hot Bolting? Its Procedure, Hazards, Best Practices, and Advantages
- What is a Flange Alignment Tool? Applications, Types, and Working of Flange Alignment Tools
- What is Pipe Flushing | Criteria for Pipe Flushing
- Factory Acceptance Test– What Is FAT, and How Does It Work?
- What is a Monorail Crane? Its Types, Components, Specifications, Advantages, and Applications
- What is a Wing Nut? Its Working, Types, Materials, Applications, Advantages
- What is Rigging Equipment?
- What is Case Hardening | Case Hardening of Steel
- What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
- What Is Annealing Steel | Annealing Process of Steel
- What is Pipeline Welding? | Methods of Pipeline Welding
- Bolts vs Screws: Difference between Bolts and Screws
- Welding Positions: Pipe Welding Positions
- Piping Installation and Erection Procedure
- Heat Affected Zone (HAZ): Definition, Causes, Effects, Color Bands, Reduction
- H-beam vs I-beam: Major Differences | H-beam and I-beam Size Chart
- Types of Construction Equipment for Oil & Gas Projects
- Pipefitters: Jobs, Requirements, Tools, Training, Salaries, and difference with Plumbers
- Bolted Steel Tanks | Design and Construction
- Magnetic Particle Inspection (MPI) Procedure
- Storage Tank Erection: Conventional vs Jacking Method
- Steam Trap Installation Best Practices
- What is Chemical Cleaning? Procedure and Examples
- General Requirements for Field Welding
- Underwater Welding & Inspection Overview
- Shaft Alignment Methodology for Compressor and Driver
- Hydrostatic Field Test of GRP / GRE lines
- Connection Procedure (Alignment) of Process Piping with Rotating Equipment
- Hydrostatic Test in Piping: Hydrotest Vs Pneumatic Test
-
Topic: E3D
- Differences Between SP3D and E3D in Engineering Design: E3D vs SP3D
- Top Piping Design Software Packages for 2024 | 2D & 3D Modelling Software Packages | Piping Design CAD Tools
- AVEVA E3D Tutorial: Equipment Modeling with Practical Example
- How to import an AVEVA E3D or PDMS model into START-PROF Piping Stress Analysis Software
- Tutorial on Pipe Modeling using AVEVA E3D software
-
Topic: Engineering Courses
-
Topic: Engineering Materials
- What is Green Steel? How is Green Steel Made?
- A Comprehensive Guide to Non-Metallic Pipes
- Guide to Corrosion Inhibitors in the Oil and Gas Industry
- Hot Rolled vs Cold Rolled Steel: What are the differences?
- Types of Metals and Their Classification
- 304 vs 316 Stainless Steel: Difference between 304 and 316 Stainless Steel
- Does Stainless Steel Rust or Corrode?
- Is Stainless Steel Magnetic? Does Stainless Steel Show Magnetic Properties?
- Stainless Steel vs Aluminum: 12 Major Differences between Stainless Steel and Aluminum
- What is Metal Galling? Its Causes, Mechanism, Susceptible Metals, Prevention
- Mechanism of Oxide Film Formation in Stainless Steel
- Piping Materials vs Pipeline Materials: Major Differences
- Cast Iron Pipes: Types, Joining, Fittings, Advantages, Codes and Standards, Applications
- Bolting Materials for Piping Engineering Applications
- Metallic Piping: Definition, Types, Advantages, Applications, ASTM List
- What is ASTM A194? Significance and Grades of ASTM A194 Nuts (PDF)
- What is ASTM A516? Its Grades, Properties, and Applications
- What is ASTM A53? Its Composition, Significance, Advantages, and Applications
- What are Black Steel Pipes? Differences Between Black Steel Pipes and Carbon Steel Pipes
- What is ASTM A193? Grades of ASTM A193 Material
- What is ASTM A182? Applications and Benefits of ASTM A182 Material
- Differences Between Stainless Steel and Galvanized Steel: Stainless Steel vs Galvanized Steel
- Differences between Stainless Steel and Alloy Steel: Stainless Steel vs Alloy Steel
- Aluminum Extrusion: A Comprehensive Guide
- Understanding Mill Finish: Everything You Need to Know
- What is Mill Tolerance?
- What are Galvanized Steel Pipes? Their Specification, Welding, and Applications
- Sheet Metal Gauge Chart: Understanding the Thickness of Sheet Metal
- How to Magnetize Stainless Steel
- Oxidation State of Nickel: Its Meaning, Significance, Parameters, and Applications
- What is Material Test Certificate (Mill Test Certificate)? Material Test Certificates 2.1, 2.2, 3.1, 3.2
- What is ASTM A333 Gr 6? A333 Gr 6 vs A106 Gr B
- What is Alloy 625? Properties, Grades, and Applications of Alloy 625
- What is Positive Material Identification or PMI? | Methods, Applications, and Advantages
- Piping Specialty Items and Their Review
- What is ASTM A105 Material? A105 vs A105N
- What is ASTM A106? Different Grades of ASTM A106 and their Differences
- What is FRP Pipe Made Of?
- Introduction to Smart-Plant Materials-SMAT
- Differences Between ASTM A312 and ASTM A358: A358 vs A312
- What is ASTM? What are ASTM Standards? ASTM vs ASME
- What is Gas Piping? Materials, Sizing, Working, and Problems of Gas Piping System
- What is a Refractory Lining? Materials, Selection, and Types of Refractory Lining
- What is a Concrete Pipe? Types and Applications of Concrete Pipes
- What is Chromoly or Chrome Moly? Characteristics and Applications of Chromoly
- What Is White Rust? Its Formation, Prevention, and Treatment
- What is the Unified Numbering System (UNS) for Metals and Alloys?
- Introduction to Aluminum Pipes and Tubes
- What is API 5L Pipe? Its Grades, Specification, and Schedule chart
- What is a Blowdown Valve (BDV)? Its Working, Types, and Applications
- What is Hastelloy? Properties, Types, and Applications of Hastelloy Material
- What is Inconel Material? Composition, Properties, Grades, and Applications of Inconel
- P-Number, F-Number, and A-Number in Welding
- What is a Spiral Wound Gasket? Applications, Types, Construction, and Specifications of Spiral Wound Gaskets
- Titanium Alloys: Applications, Types, Grades, and Examples
- What is Stress Corrosion Cracking (SCC)? Mechanism and Prevention of SCC
- What is Hydrogen Induced Cracking (HIC)? | Hydrogen Induced Cracking Mechanism
- Types of Pipes: Classification of Pipes
- Types and Materials for Water Piping
- What is Material Selection Diagram? Its Purpose, Development, and Example
- Underground Piping Insulation
- What is a Wing Nut? Its Working, Types, Materials, Applications, Advantages
- What is Fire-Safe Valve? API 607 vs API 6FA
- What is Friction Welding? Principle and Types of Friction Welding
- What is a Mechanical Fastener? Types of Fasteners
- What is Nitriding? Benefits and Types of Nitriding Process
- A36 Steel | Composition, Applications, and Properties of ASTM A36 Steel
- Rockwell Hardness Scale for Hardness Test
- Types of Steel | Grades of Steel
- What is Case Hardening | Case Hardening of Steel
- What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
- What Is Annealing Steel | Annealing Process of Steel
- Introduction to FRP Pipes | Their Properties, Specification, Codes, Joining, Supporting, and Applications
- How is Steel Made? Steel Production Process
- What is HDPE Pipe? | Types and Design of HDPE Pipes
- Ductile Iron Pipe Dimensions
- What is Ductile Iron? | Types, Properties, and Applications of Ductile Iron
- Carbon Steel vs Stainless Steel: Differences between Stainless Steel and Carbon Steel
- What is Monel? Properties, Applications, Grades, Advantages of Monel
- Types of Pipe Joints / Piping Joints
- What is Metal Fatigue? Types, Identification, Determination of Metal Fatigue
- The Function of Nickel in Stainless Steel: Is Nickel in Stainless Steel Harmful?
- The Melting Points of Metals | Melting Point of Metals Chart
- Heat Affected Zone (HAZ): Definition, Causes, Effects, Color Bands, Reduction
- Brittle Fracture and Ductile Fracture: Definition, Mechanism, Differences
- Drip Legs: Definition, Purpose, Configuration, Selection, Installation, and Sizing
- What is a Needle Valve? Types, Symbols, Working
- What is Brinell Hardness Test? Procedure, Formula, Standards
- What is a Deluge Valve? | Types and Working of Deluge Valves
- What is a Double Block and Bleed (DBB) Valve? Its Working and Application
- Duplex Stainless Steel (DSS): Definition, Grades, Composition, Properties, and Applications
- Poisson’s Ratio-Formula, Significance, Equation, Example
- What is Induction Bending? Hot Bending vs. Cold Bending
- What is Cladded Pipe? Difference Between Clad and Lined Pipe | Weld Overlay
- What is Radiographic Testing? It’s Types, Principles, Procedures, Standards, Advantages, and Disadvantages
- Flexible Metal Hoses: An essential guide
- What are Slip Joints in Piping?
- Hooke’s Law: Statement, Equation, Graph, Applications, Limitations
- Introduction to Stress-Strain Curve
- Dye Penetration Test: Definition, Principles, Procedure, Standards, Advantages, and Disadvantages
- Pressure Vessel Nozzles: Definition, Types, Allowable Loads and Design
- Automatic Recirculation Valve: Working Principle, Applications, Advantages, Pump Protection Scenarios
- Plug Valves: Parts, Working, Types, Symbol, Applications, Advantages, and Disadvantages
- Cast Iron vs Cast Steel: How to identify Cast Iron and Steel
- What is a Globe Valve? Working, Parts, Types, symbols
- 15 Most Common Welding Defects, Causes and Remedies
- Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry
- Threaded Connections in Piping: Threaded Pipe Fittings
- Butterfly Valves: Uses, Types, Working, Advantages, Symbols
- Magnetic Particle Inspection (MPI) Procedure
- Minimum Design Metal Temperature (MDMT) and Impact Test
- Introduction to Gate Valves and Gate Valve Types
- Piping Inspection Basics
- Storage Tank Failure: Examples, Causes, and Prevention
- Design of Bolted Connections or Bolted Joints
- What is a Pipe Expansion Joint and Why do I need one?
- What is Chemical Cleaning? Procedure and Examples
- Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition
- Piping Material Take Off: MTO, BOM, BOQ & MTO Stages
- What is a Miter Bend? Design Formulas for Miter Bend Calculation
- Stress or Strain: Which Comes First?
- Pressure Temperature Rating and Flange Rating of ASME Flanges
- Differences Between Seamless and Welded Pipe | Seamless vs Welded Pipe
- Comparison of Pipe and Tube | Pipe Vs Tube
- Details about Spectacle Blind and Spacers
- What are Insulating Gaskets? Their Types, Components, Applications, Installation
- Difference between Tee and Barred Tee
- Hot and Cold Thermal Insulation for Piping | Calculation of Thermal Insulation Thickness
- How to Select a Bolt? | Bolt Selection Process
- Underwater Welding & Inspection Overview
- Valve Inspection & Testing | API 598 | Third Party Valve Inspection
- Types of Pipe Materials and Their Selection / Metallic Pipe
- Cathodic Protection: Definition, Working Principles, Types, Design, Advantages, Applications
- Hydrostatic Field Test of GRP / GRE lines
- Pipelines Material Selection in the Oil & Gas Industry
- Selection of Pipe Flanges in Piping Industry
- Design Guidelines for PE & ROTO Lined Carbon Steel Piping
- Piping Nipples for Piping and Plumbing Industry
- Material Take-Off (MTO) & Processing for Piping System
- Overview of Pipe Coupling and Pipe Coupling Types
- Design of Cathodic Protection for Duplex Stainless Steel (DSS) Pipeline
- Meaning of Pipe Schedule | Pipe Schedule Chart | Pipe Schedule 40 & 80 Dimensions
- What Will You Do if Carbon Steel Pipe is Installed in Place of LTCS: CS vs LTCS
- Selection of Pipes for a Plant: Pipe Selection Guidelines
- Piping Specifications | Piping Material Specification (PMS) | Piping Class
- Forms of Corrosion: Corrosion Types
- What is Heat Tracing? Steam Tracing vs Electric Tracing
- What is Indian Boiler Regulation (IBR)? ASME B31.1 vs IBR
- What is Post Weld Heat Treatment (PWHT)? Its Procedure, Advantages, and Requirements
- Vacuum Box Testing of Butt, Fillet, and Lap Weld
- Technical requirements for Pipes & Fittings for preparation of Purchase Requisition
- What is a Sour Service? | NACE Sour Service Criteria
- Plastic Piping System: Types of Plastic Pipes
- Flange Bolt Tightening Procedure | Bolt Tightening Steps
- Common Non-Ferrous Piping Materials used in Process Industry
- Hazards of Cranes and Crane safety during Construction
- What is Corrosion Under Insulation (CUI) | Thermal Sprayed Aluminium (TSA)
- Material Selection & Quality Management for a Cross Country Pipeline
- Steel Pipes Used in Process Industries
- Overview of GRP Pipes
- Steps for the Procurement of Piping / Mechanical items
- Internal Pipe Coating | FBE Coating | Glass-Flake Coating | PE & ROTO Lining
- Pipe Color Coding and Pipe Marking Criteria with Examples
- Pipe Reducers: Concentric Reducers, Eccentric Reducers, Differences
- Anti-Corrosive Composites for Oil and Gas Industry
- Steel Surface Coating for Corrosion Prevention
- Basic Principles of Aboveground GRE Piping System
- Piping Material Engineer: Roles, Responsibilities, and Activities
- What’s new in ISO 14692-2017 Edition
- Technical Bid Evaluation Criteria and Vendor Offer Review
-
Topic: EPC Jobs
-
Topic: Health & Safety
- What is NFPA (National Fire Protection Association)? | NFPA Codes and Standards
- Job Safety Analysis: Definition, Purpose, Requirements, Team Composition, Procedure, Sample Format
- What is a Hazardous Environment? Examples, Types, and Safeguarding
- Understanding Lost Time Injury (LTI) and Its Impact on Workplace Safety: Lost Time Injury Frequency Rate
- What is PSSR or Pre-Startup Safety Review?
- What are Lower Explosive Limits (LEL) and Upper Explosive Limits (UEL)
- What Is White Rust? Its Formation, Prevention, and Treatment
- What is a Fire Pump? Working, Sizing, and Types of Fire Pumps
- What is Nitrogen Purging? Applications, Procedures, and Benefits of N2 Purging
- What is Inerting? Gases Used for Inerting and Their Selection Criteria
- What is a Fire Hydrant? Its Types, Working, Components, and Color Coding
- Fire Extinguisher: Meaning, Classes, Types, Selection, Use, Inspection
- What is Material Safety Data Sheet (MSDS)? | MSDS VS SDS
- What is a Deluge Valve? | Types and Working of Deluge Valves
- What is a Double Block and Bleed (DBB) Valve? Its Working and Application
- Deluge System: Definition, Working, Applications, and Advantages
- Surge Relief Valve: Definition, Function, Types, Sizing, Selection
- Emergency Shutdown System or ESD System
- Emergency Eye Wash Station and Emergency Shower Requirements
- Introduction to Fire Protection System | Fire Fighting System
- Process Safety Management (PSM) and Process Safety
- Site Visit Safety Rules: Operating Plant Visit Safety Guidelines
- Excavation Hazards and Control Measures
- Carbon Monoxide Poisoning: Sources, Signs & Symptoms, Prevention
-
Topic: Inspection and Testing
- Welding Inspectors: CSWIP and AWS-CWI
- What is Fitness for Service? API 579 Fitness for Service Assessment
- What Is White Rust? Its Formation, Prevention, and Treatment
- What is PSV Testing? Its Requirements, Procedure, and Standards
- What is Hydrogen Induced Cracking (HIC)? | Hydrogen Induced Cracking Mechanism
- Factory Acceptance Test– What Is FAT, and How Does It Work?
- Fire Extinguisher: Meaning, Classes, Types, Selection, Use, Inspection
- Magnetic Particle Inspection (MPI) Procedure
- Piping Inspection Basics
- Hydrostatic Test in Piping: Hydrotest Vs Pneumatic Test
-
Topic: Instrumentation
- Flow Transmitters vs Flow Meters: Major Differences
- What are Modulating Valves? Types, Applications, and Benefits
- What is a Pressure Switch? Its Working, Types, and Selection
- Meaning of LO and LC in Valves
- What is Positive Material Identification or PMI? | Methods, Applications, and Advantages
- What is a Pressure Control Valve (PCV)? Types and Applications of PCV
- What is a Temperature Control Valve? It’s Working, Applications, and Types
- What is an Orifice Flowmeter? Its Working, Installation, Types, Advantages, and Disadvantages
- What is Level Measurement? Its Types, Working, & Advantages
- What is High Integrity Pressure Protection System (HIPPS)?
- What is a Manifold Valve? Types of Manifold Valves
- What is Instrumentation Engineering? Components and Example of Instrumentation
- Alarm Management for Oil & Gas Industries
- What is PSV Testing? Its Requirements, Procedure, and Standards
- What is Smart Plant Instrumentation (SPI) Intools?
- What is A Vibration Analyzer? Applications and Working of Vibration Analyzers
- What is a Vibration Sensor? Its Application, Working, Types, and Selection
- What is a Breather Valve? | Breather Valve for Tanks
- Pressure Relief Valve (PRV): Definition, Types, Working, Location, Sizing, Codes and Standards
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- Surge Relief Valve: Definition, Function, Types, Sizing, Selection
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- Emergency Shutdown System or ESD System
- Plug Valves: Parts, Working, Types, Symbol, Applications, Advantages, and Disadvantages
- Venturimeter: Definition, Parts, Working, Equation, Applications, Installation
- Actuators: Definition, Parts, Working, Types, Selection
- Engineering Deliverables for Chemical, Oil & Gas Projects
- What is a Vortex Flow Meter? Its Working, Types, Applications, and Importance
- Rupture Disc: Definition, Types, Components, Selection, Sizing, Advantages, Installation
- Level Gauges: Types, Sizing, and Ordering Information | Level Instrument | Level Indicator
- What is FMS or Flow Metering Skid?
- Types of Flow Meters and Their Applications
- What are Control Valves? | Selection and Types of Control Valves
- Temperature Measurement by Filled Thermal Systems
- Overview of Piping and Instrument Interface
- Overview of Conductivity and Conductivity Measurement
- What is a Restriction Orifice (RO)? Its Applications, Types, Working, and Sizing
- What is an Oxidation-Reduction Potential (ORP)? How is it Measured?
- Types of Pressure-Relieving Devices for Protection from Overpressure
- What is a Thermowell? Types of Thermowell
- Control Valve Sizing
- pH Analyzers: pH Meters
- Preparation of LC and LG Arrangement
- What is System Earthing?
- What is a Pressure Gauge? Types of Pressure Measuring Instruments
- Checking of Design | Design Checking | Design Checklist
-
Topic: Maintenance
- Does Stainless Steel Rust or Corrode?
- What is a Link Seal? Its Advantages, Applications, Sizing, Working, and Installation
- Rusting Pipes: Causes, Prevention, and Treatment
- What is Hydro Jetting?
- What is a Boom Lift? Applications, Sizes, and Types of Boom lifts
- What Is White Rust? Its Formation, Prevention, and Treatment
- What is Metal Grating? Types and Uses of Metal Gratings
- What is a Forklift? Working and Types of Forklifts for the Construction Industry
- What are Inch-Dia and Inch-Meter in Piping? Their Significance, Calculation, and Examples
- What is Condition-Based Maintenance (CBM)?
- What is Cold Cutting? Types of Cold Cutting Machines
- What is Flange Facing? Working and Types of Flange Facing Machines
- What is Hot Bolting? Its Procedure, Hazards, Best Practices, and Advantages
- What is a Flange Alignment Tool? Applications, Types, and Working of Flange Alignment Tools
- What is A Vibration Analyzer? Applications and Working of Vibration Analyzers
- What is a Vibration Sensor? Its Application, Working, Types, and Selection
- What is a Monorail Crane? Its Types, Components, Specifications, Advantages, and Applications
- What is Case Hardening | Case Hardening of Steel
- What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
- Bolts vs Screws: Difference between Bolts and Screws
- Carbon Steel vs Stainless Steel: Differences between Stainless Steel and Carbon Steel
- Types of Maintenance
- H-beam vs I-beam: Major Differences | H-beam and I-beam Size Chart
- Preventive Maintenance: Definition, Types, Philosophy, Advantages, and Disadvantages
- What is Chemical Cleaning? Procedure and Examples
- Collar Bolts To Maintain Removable Bundles in Heat Exchangers
- General Requirements for Field Welding
- Underwater Welding & Inspection Overview
- Cathodic Protection: Definition, Working Principles, Types, Design, Advantages, Applications
- Shaft Alignment Methodology for Compressor and Driver
- Hydrostatic Field Test of GRP / GRE lines
- Connection Procedure (Alignment) of Process Piping with Rotating Equipment
- Hydrostatic Test in Piping: Hydrotest Vs Pneumatic Test
- What is Vibration Monitoring and Why is it Important?
- Internal Cleaning of Piping System
- Cooling Tower Water Treatment Basics
-
Topic: Mechanical
- What are the Differences Between a Pump and a Compressor? Pumps vs Compressors
- What is the Pressure Equipment Directive (PED)? | PED vs ASME
- Welding Repair: Techniques, Procedures, and Standards
- Shear Modulus or Modulus of Rigidity: Definition, Significance, Example
- Types of Pumps and Their Working
- Casting vs Forging- Key Differences between Forging and Casting
- Reciprocating Compressor Sizing
- Pressure Vessels vs Storage Tanks: Major Differences
- What is Pressure Vessel Fabrication?
- What Is a Castle Nut? Uses, Working, and Differences from Slotted Nuts
- What is a Flange Coupling? Advantages, Types, Working, Uses
- What are Lock Nuts and How Do They Work? Types of Lock Nuts
- Types and Working of Centrifugal Pumps
- What is a Pump Coupling? Its Types, Functions, Applications
- Understanding Diaphragm Pumps: A Comprehensive Guide
- What is a Pulsation Dampener? Its Working, Types, Benefits, and Applications
- Top 10 Mechanical Engineering Software Tools for 2024
- What is a Petroleum Tank? Its Types, Materials, Standards, and Specification
- What is a Distillation Column? Its Types, Working, and Components
- What is Burst Testing? Burst Test vs Hydrostatic Test
- Understanding API 650: The Standard for Aboveground Storage Tanks
- MEP Engineer: Defining the Role, Responsibilities, & Earnings
- Understanding API 610: The Standard for Centrifugal Pumps in the Oil and Gas Industry
- Types of Pressure Vessels and Their Selection
- Exploring the Various Types of Pressure Vessel Heads
- What is a Ducting Pipe? Types, Materials, and Applications of Duct Pipes
- What is a Pump Skid and What are its Advantages?
- What is a Cryogenic Tank? Design, Construction, and Applications of Cryogenic Storage Tanks
- What is the Canadian Registration Number or CRN?
- What are HFO Refrigerants? Their Benefits and Applications
- What is a Heat Pump? Its Components, Working, Types, Advantages, and Disadvantages
- Heat Exchanger Fouling Factor: Its Significance and Calculation
- Heat Exchanger Fouling or Scaling: Its Causes, Consequences, and Mitigation
- Heat Exchanger Tube Plugging: Types of Plugs and Plugging Steps
- Parts of a Heat Exchanger; Their Functions, Associated Problems, and Potential Solutions
- What is High-Frequency Welding? Introduction to High-Frequency Welding Machine
- What is a Fired Equipment? Types of Fired Equipment for Oil and Gas Industries
- Overview of Nitrogen Tanks and Cylinders
- Vibration Measurement: Instruments, Units, and Applications Explained
- Vibration Absorbers: Types, Working, Specification, Applications, and Advantages
- What is NFPA 37? NFPA 37 vs NFPA 110
- Thermocouples: Definition, Applications, Parts, Working, Types, and Selection
- Pipe Fabrication Shops in Piping Construction for Oil and Gas Industries: Shop Fabrication vs Site Fabrication
- Electrical Submersible Pumps: Working Principle, Components, Installation, Maintenance, Applications
- What is TEMA (Tubular Exchanger Manufacturers Association) and Why is it Important? TEMA Heat Exchangers
- What is a Mechanical Datasheet? Process Datasheet vs Mechanical Datasheet
- What is a Vortex Breaker? Applications, Types, Design, and Working of a Vortex Breaker
- What is ASME Certification? Procedure for ASME Certification and the ASME Certification Mark
- What is a Pump Performance Curve? Types of Pump Performance Curves
- What is a Heavy Hex Nut? Dimensions of Heavy Hex Nuts
- What is Girth Welding? Pipeline Girth Welding
- What is CNG? Its Properties, Uses, Origin, Composition, & CNG Process
- What is a Progressive Cavity Pump? Its Working, Design, and Applications
- What is ASTM? What are ASTM Standards? ASTM vs ASME
- What is a Refractory Lining? Materials, Selection, and Types of Refractory Lining
- What is a Slurry Pump? Selection and Types of Slurry Pumps
- What Is White Rust? Its Formation, Prevention, and Treatment
- What is a Fire Pump? Working, Sizing, and Types of Fire Pumps
- Types of Lines in Engineering/ Technical Drawings and Their Uses
- What is the Unified Numbering System (UNS) for Metals and Alloys?
- How to Calculate Weight of a Steel Plate? Steel Plate Weight Calculator
- What is a Sideboom PipeLayer?
- How to Deal with Local Primary Membrane Stresses?
- Washers vs Gaskets: Main Differences between a Gasket and a Washer
- Colors of Hydrogen: Green, Blue, Grey, Black, Brown, Pink, Turquoise, Yellow, Red, and White Hydrogen
- What is PSV Testing? Its Requirements, Procedure, and Standards
- What is a Foot Valve? It’s Working, Types, and Applications: Foot Valve vs Check Valve
- What is Greenhouse Effect and Net-zero Carbon Emission?
- What is a Blowdown Valve (BDV)? Its Working, Types, and Applications
- What is a Stud Bolt? Types, Selection, Materials, and Standards of Stud-Bolt
- What is Condition-Based Maintenance (CBM)?
- What is Cold Cutting? Types of Cold Cutting Machines
- How to Become a Piping Designer?
- P-Number, F-Number, and A-Number in Welding
- What is Hot Bolting? Its Procedure, Hazards, Best Practices, and Advantages
- What is a Flange Alignment Tool? Applications, Types, and Working of Flange Alignment Tools
- What is A Vibration Analyzer? Applications and Working of Vibration Analyzers
- Types of Condensers
- What is a Vibration Sensor? Its Application, Working, Types, and Selection
- The Rise of Electric Vehicles and Their Impact on Oil Demand
- What is Stress Corrosion Cracking (SCC)? Mechanism and Prevention of SCC
- What is an Air Relief Valve, Air Release Valve, or Air Valve?
- Fluid Flow | Flow through Pipes| Effects of Fluid Properties on the Piping System
- What is a Coalescer? Its Types, Working, and Applications
- Introduction to Reboiler Control
- What is a Flare KOD | Working, Functions, Sizing, and Design of a Knock Out Drum
- What is a Monorail Crane? Its Types, Components, Specifications, Advantages, and Applications
- What is a Wing Nut? Its Working, Types, Materials, Applications, Advantages
- What is Buffing? | Differences between Buffing and Polishing: Buffing vs Polishing
- What is Pressure Reducing Valve? Its Types, Applications, and Advantages
- What is Rigging Equipment?
- What is Friction Welding? Principle and Types of Friction Welding
- What are Hub Connectors? | Its Design, Benefits, and Applications
- What is a Breather Valve? | Breather Valve for Tanks
- What is a Mechanical Fastener? Types of Fasteners
- Methods for Welding Stainless Steel
- What is Nitriding? Benefits and Types of Nitriding Process
- What are Agitators? Selection and Types of Agitators
- What is Concurrent Engineering?
- What are Vessel Trims? / Examples and Characteristics of Pressure Vessel Trims
- What is Crude Oil? / Crude Oil Price and Types
- Rockwell Hardness Scale for Hardness Test
- What is Tensile Strength? Tensile Strength of Steel and Other Materials
- Types of Steel | Grades of Steel
- What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
- What Is Annealing Steel | Annealing Process of Steel
- What is Viscosity? | Factors Affecting Viscosity | Newton’s law of Viscosity
- What is Pipeline Welding? | Methods of Pipeline Welding
- How is Steel Made? Steel Production Process
- What is HDPE Pipe? | Types and Design of HDPE Pipes
- Bolts vs Screws: Difference between Bolts and Screws
- What is Ductile Iron? | Types, Properties, and Applications of Ductile Iron
- What is Monel? Properties, Applications, Grades, Advantages of Monel
- Types of Pipe Joints / Piping Joints
- Welding Positions: Pipe Welding Positions
- Heat Affected Zone (HAZ): Definition, Causes, Effects, Color Bands, Reduction
- Brittle Fracture and Ductile Fracture: Definition, Mechanism, Differences
- Gas Turbines: Definition, Applications, Working, Components, Types, Design, Advantages
- Pour Point: Definition, Significance, Features, Measurements, Factors
- Steam Turbines: Basics, Types, Selection, Components, Construction, Codes, Manufacturers
- Types of Maintenance
- Storage Tank Construction: Procedure and Method Statement
- Pressure Relief Valve (PRV): Definition, Types, Working, Location, Sizing, Codes and Standards
- Meaning and Requirements of ASME U Stamp on Pressure Vessels
- Drip Legs: Definition, Purpose, Configuration, Selection, Installation, and Sizing
- H-beam vs I-beam: Major Differences | H-beam and I-beam Size Chart
- What is a Needle Valve? Types, Symbols, Working
- Types of Construction Equipment for Oil & Gas Projects
- What is Brinell Hardness Test? Procedure, Formula, Standards
- Introduction to Finite Element Analysis or FEA
- What is a Deluge Valve? | Types and Working of Deluge Valves
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- Maximum Shear Stress Theory: Tresca Theory of Failure
- Brownfield vs Greenfield: Differences Between Brownfield and Greenfield Oil and Gas Projects
- Introduction to Von Mises Stress Concept
- What is a Double Block and Bleed (DBB) Valve? Its Working and Application
- Moment of Inertia: Introduction, Definition, Formula, Units, Applications
- Deluge System: Definition, Working, Applications, and Advantages
- Duplex Stainless Steel (DSS): Definition, Grades, Composition, Properties, and Applications
- Differences between a Centrifugal Pump and a Positive Displacement Pump
- Flange Bolt Torque Calculation and Pipe Flange Bolt Torque Chart
- What is Pump Priming and Why it is Required? | Self-Priming Pumps
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- Poisson’s Ratio-Formula, Significance, Equation, Example
- What is Induction Bending? Hot Bending vs. Cold Bending
- Pressure Transient Analysis for Liquid HC Pipelines | Water Hammer Calculation-Joukowsky Formula
- Flare System: Definition, Types, Components, and Design
- What is the Reynolds Number? The Equation for Reynolds Number and Its Significance
- What is Radiographic Testing? It’s Types, Principles, Procedures, Standards, Advantages, and Disadvantages
- Design of Centrifugal Compressor Piping and Appurtenances excluding Anti-Surge Systems
- Factor of Safety: Definition, Equation, Examples, Calculator
- Free Body Diagram: Definition, Purpose, Examples, Steps
- Flexible Metal Hoses: An essential guide
- What are Slip Joints in Piping?
- Hooke’s Law: Statement, Equation, Graph, Applications, Limitations
- Young’s Modulus | Modulus of Elasticity | Elastic Modulus | Young’s Modulus of Steels
- PVC Piping and Fittings: Applications, Manufacturing, Standards, & Support Span of PVC Piping
- Introduction to Stress-Strain Curve
- Pascal’s law: Definition, Formula, Applications, and Examples
- 3-Phase Separator Design Basics
- Dye Penetration Test: Definition, Principles, Procedure, Standards, Advantages, and Disadvantages
- Pressure Vessel Nozzles: Definition, Types, Allowable Loads and Design
- Automatic Recirculation Valve: Working Principle, Applications, Advantages, Pump Protection Scenarios
- Plug Valves: Parts, Working, Types, Symbol, Applications, Advantages, and Disadvantages
- Cast Iron vs Cast Steel: How to identify Cast Iron and Steel
- What is a Globe Valve? Working, Parts, Types, symbols
- Bernoulli’s Equation & Principle: Definition, Derivation, Examples, Application
- Venturimeter: Definition, Parts, Working, Equation, Applications, Installation
- Pipe Weight Calculation | Steel Pipe Weight Chart
- Actuators: Definition, Parts, Working, Types, Selection
- Meaning of Ultrasonic Testing | Ultrasonic Testing of Welds
- 15 Most Common Welding Defects, Causes and Remedies
- Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry
- Bolted Steel Tanks | Design and Construction
- Dynamic Analysis of Piping System
- Types of Pipe Flanges for Piping and Pipeline Systems
- Difference Between ASME Sec VIII Div. 1 and Div. 2
- Magnetic Particle Inspection (MPI) Procedure
- Two-Phase Separator Design Basics
- Introduction to Gate Valves and Gate Valve Types
- Piping Inspection Basics
- Storage Tank Erection: Conventional vs Jacking Method
- What is Fireproofing? Types, Materials, Methods
- Storage Tank Failure: Examples, Causes, and Prevention
- Camouflaging of Oil Storage Tanks
- Difference between API 650 and API 620 Tanks: API 650 vs API 620
- Design of Bolted Connections or Bolted Joints
- What is a Pipe Expansion Joint and Why do I need one?
- Steam Trap Installation Best Practices
- Vacuum Breaker: Uses, Working, Function, Installation
- Nozzle Reinforcement Calculation for a Cylindrical Nozzle
- Who is a Piping Design Engineer or Piping Designer or Piping Layout Engineer?
- Piping Engineer: Types, Roles, Career, Skills, Jobs
- Differences Between ASME B31.3 and B31.1: B31.3 vs B31.1
- Reciprocating Pump: Introduction, Definition, Parts, Working Principle, Advantages, Disadvantages, and Applications
- 12 Phases of Project Life Cycle | Oil and Gas Project Life-Cycle
- Upstream, Midstream, Downstream Oil and Gas Industry
- What is a Miter Bend? Design Formulas for Miter Bend Calculation
- Engineering Deliverables for Chemical, Oil & Gas Projects
- Dish and Nozzle Center line Distance Calculation from Nozzle Orientation of Pressure Vessel
- Difference between Primary loads and Secondary loads in a Piping System
- Stress or Strain: Which Comes First?
- Pressure Temperature Rating and Flange Rating of ASME Flanges
- What Are The Pump Affinity Laws? Explanation with a Sample Calculation
- Pressure vs Stress: Differences Between Pressure and Stress
- Comparison of Pipe and Tube | Pipe Vs Tube
- Pump Suction Intake Design with Sample Calculation
- Top EPC companies of UAE (Abu Dhabi, Dubai, and Sharjah) to try for employment opportunities
- Rupture Disc: Definition, Types, Components, Selection, Sizing, Advantages, Installation
- Details about Spectacle Blind and Spacers
- What are Insulating Gaskets? Their Types, Components, Applications, Installation
- Injection Point and Mixing Points for Process Streams
- Collar Bolts To Maintain Removable Bundles in Heat Exchangers
- What is FMS or Flow Metering Skid?
- What is Acoustic-Induced Vibration or AIV?
- What is Pump Cavitation? Types, Causes, Effects, and Prevention of Pump Cavitation
- Flow-Induced Vibration or FIV in a Piping System with Online Course
- Understanding Pressure and Temperature in the context of Pressure Vessel Design
- General Requirements for Field Welding
- How to Select a Bolt? | Bolt Selection Process
- Underwater Welding & Inspection Overview
- Fired Heaters: Working, Components, Types, Function, Sections, Maintenance
- Piping Strainers: Applications, Types, Design Standards, Symbol, Materials, Selection
- HVAC Systems: Meaning, Objectives, Components, Types, Selection
- Compressed Air System: A Detailed Guide
- Pressure Vessels: Types, Design, Supports, Applications, Materials
- Aboveground Storage Tanks: Types, Components, Design Aspects, and Erection
- Types of Atmospheric Storage Tanks: Fixed Roof vs Floating Roof Tanks
- Types of Pipe Materials and Their Selection / Metallic Pipe
- Cathodic Protection: Definition, Working Principles, Types, Design, Advantages, Applications
- Outline of Piping Design: Basic Elements
- Shaft Alignment Methodology for Compressor and Driver
- Major Factors Affecting the Pump Performance
- Introduction to EOT CRANES & HOISTS
- What is Steam Blowing? Steam Blowing Procedure
- Water Hammer Basics in Pumps for Beginners
- Check List for Reviewing of Shell & Tube Heat Exchanger Drawings
- Connection Procedure (Alignment) of Process Piping with Rotating Equipment
- Long Lead Items for a Process Piping Industry
- Storage Tank Settlement for Piping Stress Analysis
- Difference Between Centrifugal and Reciprocating Compressor
- Basics of Shell and Tube Heat Exchangers
- What is Vibration Monitoring and Why is it Important?
- Vessel Clips | Vessel Cleats | Pressure Vessel Cleats
- What is a Steam Trap? Types, Selection, Features, Codes & Standards
- API 650 Tank Bulging Effect or Bulging Effect of Storage Tank Shells
- Temperature Measurement by Filled Thermal Systems
- Basics of Reciprocating Compressors / Difference Between Reciprocating Compressor and Rotary Compressor
- Pre-Commissioning and Commissioning Checklist for Flare Package
- API 610 Pumps vs ANSI / ASME B73.1 Centrifugal Pumps
- Christmas Tree and Wellhead: Function, Components, Differences, Design Codes
- Air Cooled Heat Exchangers (ACHE)
- What is Post Weld Heat Treatment (PWHT)? Its Procedure, Advantages, and Requirements
- Vacuum Box Testing of Butt, Fillet, and Lap Weld
- What is Static Equipment? Types and List of Static Equipments
- Piping Design Guide of Reactors
- What is a Sour Service? | NACE Sour Service Criteria
- Plastic Piping System: Types of Plastic Pipes
- Dry Gas Sealing Systems
- Flange Bolt Tightening Procedure | Bolt Tightening Steps
- Brief Explanation of Major Pressure Vessel Parts
- Overview of Offshore Pipeline Systems
- Equipment Nozzle Loads and Means for Reducing Them
- Hazards of Cranes and Crane safety during Construction
- Hot Tapping on Operating Lines
- What is Corrosion Under Insulation (CUI) | Thermal Sprayed Aluminium (TSA)
- Piping Design Guidelines for Horizontal Drums
- Process Design of Centrifugal Compressor System
- 10 Considerable Points for Pressure Vessel Nozzle Load Tables
- AFT Impulse Pulsation Frequency Analysis (PFA) Module
- Elevated Flare systems used in Process Industries
- Types of Pressure-Relieving Devices for Protection from Overpressure
- Understanding Centrifugal Compressor Surge and Control
- Understand the Harmonic Analysis and Ensure the Pressure pulsation comply with API 674
- Pumps & Pumping Systems
- Motion Amplification Technology (MAT) for Piping Vibration Visualization
- Piping Insulation: Functions, Materials, and Types of Pipe Insulation
- Common Causes of Piping Vibration: How to Reduce Pipe Vibration?
- Centrifugal Pumps with Speed Control
- Selection of Valves: Valve Selection Procedure
- Storage Tank design using TANK software and re-rating with API 620 & API 579
- Internal Pipe Coating | FBE Coating | Glass-Flake Coating | PE & ROTO Lining
- Control Valve Sizing
- Lifting Lug Design with Examples
- Piping Isometric Drawings | Symbols, How to Read, Software | Piping Isometrics
- What is a Combined Cycle Power Plant?
- Considerations for Project Site Selection
- Emergency Vents for Storage Tanks
- Interpretation of External Load On Nozzle Flange using PV Elite & Code Case 2901
- Pipe Reducers: Concentric Reducers, Eccentric Reducers, Differences
- Cooling Tower Water Treatment Basics
- List of Piping Design Companies in India
- Examples of Hazards of Pressure Testing
- LPG Storage Tanks: Meaning, Types, Selection, Specification, and Design Calculations
- Pump Commissioning and Start-Up: Pump Commissioning Checklist
- Pump Installation Checklist and Best Practices
- What is Winterization? Requirements for the Basic Design of Winterization Systems
- Checking of Design | Design Checking | Design Checklist
- Mechanical Draft and Special Type Cooling Towers
- What is a Reboiler? Types and Selection of Reboilers
- Importance & Impact of Stress Intensification Factor (SIF) in Piping
- Protecting Steel Pipes: The Power of Anti-Corrosive Coatings and Linings
- Technical Bid Evaluation Criteria and Vendor Offer Review
-
Topic: Oil and Gas-Energy
- What is Sucker Rod Pump or Beam Pump?
- What is a Sucker Rod? Its Types and Importance
- What is Petroleum Coke or Petcoke? Its Types, Applications, and Differences with Coal
- What is Vapor Density and Why Is It Important? Vapor Density of Air and Water
- What is Fire Point? Differences Between Flash Point and Fire Point
- What is Flash Point? Its Significance, Measurement, and Examples
-
Topic: PDMS
- Top Piping Design Software Packages for 2024 | 2D & 3D Modelling Software Packages | Piping Design CAD Tools
- Why is Aveva PDMS better than Intergraph PDS?
- How to import an AVEVA E3D or PDMS model into START-PROF Piping Stress Analysis Software
- PDMS Video Tutorial/Lessons for Beginners
- Piping Isometric Drawings | Symbols, How to Read, Software | Piping Isometrics
-
Topic: PDMS-E3D
- Differences Between SP3D and E3D in Engineering Design: E3D vs SP3D
- Top Piping Design Software Packages for 2024 | 2D & 3D Modelling Software Packages | Piping Design CAD Tools
- AVEVA E3D Tutorial: Equipment Modeling with Practical Example
- Why is Aveva PDMS better than Intergraph PDS?
- How to import an AVEVA E3D or PDMS model into START-PROF Piping Stress Analysis Software
- How to import a CADWorx model into START-PROF Piping Stress Analysis Software
- Tutorial on Pipe Modeling using AVEVA E3D software
- PDMS Video Tutorial/Lessons for Beginners
- Free Trial Version of Pipe Stress Analysis Software and Online Pipe Stress Analysis Training Course with Certificate
- Piping Isometric Drawings | Symbols, How to Read, Software | Piping Isometrics
- Nonstandard Valve Model for Pipe Stress Analysis: Angular, 3-way, 4-way, with Actuator
-
Topic: Pipeline
- Design of Oxygen Pipeline for Cold Blast Enrichment in a Steel Plant – A Case Study
- What is Geographic Information System (GIS)? Its Importance in Petroleum and Pipeline Industry
- Design of Sub-Sea Pipelines
- What are Pipeline Block Valves? Design of Pipeline Block Valve Stations
- Pipeline Engineering Interview Questions
- Hydrostatic Test of Pipelines | Hydrostatic Test Equipment
- Pig Launchers, Receivers, and Traps for Pipeline Pigging
- What is a Pipeline Stopple? Importance of Stopple Fittings
- Guide to Pipe and Pipeline Bends: Hot Bends, Cold Bends, Elastic Bends
- What Are API Flanges? | API Flange Charts and Dimensions
- What is a Multiport Selector Valve or MSV? Importance of MSV Skids
- How to Clean Pipelines?
- Pig Signallers: Types, Components, Materials, and Installation Guidelines
- Roles of Pipeline Engineers: Piping Engineer vs Pipeline Engineer
- What is a Desander? Types, Working, Features, and Selection of Desanders
- What is Girth Welding? Pipeline Girth Welding
- What is DN and PN Number for Pipes? Pipe Class Rating vs PN Numbers
- Detailed Online Course on Pipe Stress Analysis (25 hours of Content) with Certificate + Free Trial Version of Pipe Stress Analysis Software
- What is Flange Facing? Working and Types of Flange Facing Machines
- Snow and Ice Loading on Piping Systems
- What is an RTJ Flange? | Ring Type Joint Flanges
- Hydrogen Piping and Pipeline Systems | ASME B31.3 vs ASME B31.12
- What are Flowlines in Oil and Gas? Differences between Flowlines and Pipelines
- What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
- What is a Thrust Block? It’s Design, Construction, Types, Working, Differences with Anchor Block
- What is Pipeline Welding? | Methods of Pipeline Welding
- What is HDPE Pipe? | Types and Design of HDPE Pipes
- Ductile Iron Pipe Dimensions
- Carbon Steel vs Stainless Steel: Differences between Stainless Steel and Carbon Steel
- Pour Point: Definition, Significance, Features, Measurements, Factors
- Pressure Relief Valve (PRV): Definition, Types, Working, Location, Sizing, Codes and Standards
- Types of Construction Equipment for Oil & Gas Projects
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- Maximum Shear Stress Theory: Tresca Theory of Failure
- What is a Topographic Survey? | Cost of Topographic Survey
- What is a Double Block and Bleed (DBB) Valve? Its Working and Application
- Surge Relief Valve: Definition, Function, Types, Sizing, Selection
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- Slug Catcher: Definition, Types, Selection & Design Steps
- What is Induction Bending? Hot Bending vs. Cold Bending
- Pressure Transient Analysis for Liquid HC Pipelines | Water Hammer Calculation-Joukowsky Formula
- What is Cladded Pipe? Difference Between Clad and Lined Pipe | Weld Overlay
- What is Radiographic Testing? It’s Types, Principles, Procedures, Standards, Advantages, and Disadvantages
- Design of Centrifugal Compressor Piping and Appurtenances excluding Anti-Surge Systems
- Hooke’s Law: Statement, Equation, Graph, Applications, Limitations
- PVC Piping and Fittings: Applications, Manufacturing, Standards, & Support Span of PVC Piping
- Pascal’s law: Definition, Formula, Applications, and Examples
- What is a Globe Valve? Working, Parts, Types, symbols
- Bernoulli’s Equation & Principle: Definition, Derivation, Examples, Application
- Venturimeter: Definition, Parts, Working, Equation, Applications, Installation
- Pipe Weight Calculation | Steel Pipe Weight Chart
- Overview of Lateral Buckling and Upheaval Buckling of Pipelines
- Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry
- Butterfly Valves: Uses, Types, Working, Advantages, Symbols
- What is a P&ID Drawing | P&ID Symbols | How to Read P & ID Drawings
- Introduction to Gate Valves and Gate Valve Types
- Stress Analysis of Surface Laid Pipelines
- Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition
- What is a Miter Bend? Design Formulas for Miter Bend Calculation
- B31.4 vs B31.8-Differences between ASME B31.4 and ASME B31.8
- What is FMS or Flow Metering Skid?
- Comparison between Piping and Pipeline Engineering : Piping vs Pipeline
- Difference between Tee and Barred Tee
- General Requirements for Field Welding
- Valve Inspection & Testing | API 598 | Third Party Valve Inspection
- What is a Piping Drawing? | Types of Piping Drawings
- Buried GRP/FRP pipe Laying and Installation Procedure
- Cathodic Protection: Definition, Working Principles, Types, Design, Advantages, Applications
- Hydrostatic Field Test of GRP / GRE lines
- Pipe Expansion Loops on the Piping or Pipeline Systems
- Pipelines Material Selection in the Oil & Gas Industry
- Design Guidelines for PE & ROTO Lined Carbon Steel Piping
- What is an Isolation Joint? Monolithic Isolation Joints (MIJ) for Pipelines
- Internal Cleaning of Piping System
- Start-up and Commissioning of the Pipeline
- Micro Tunneling for Pipeline Installation
- Christmas Tree and Wellhead: Function, Components, Differences, Design Codes
- Damaging effects of Low-Velocity Flow In Piping And Pipelines
- Overview of Offshore Pipeline Systems
- Hot Tapping on Operating Lines
- Factors Affecting Line Sizing of Piping or Pipeline Systems
- Software Based Pipeline Leak Detection
- What are Drilling Rigs? | Types of Drilling Rigs
- Offshore Pipeline Design Guidelines
- Pipeline Stress Analysis
- Material Selection & Quality Management for a Cross Country Pipeline
- Rotary Selector Valve (RSV) and Multi Phase Flow Meter (MPFM)
- Pipeline Construction Stages
- Introduction to Marine Loading Arm
- What is Pipeline Pigging? Pig Types, Pig Launcher, and Receiver
- Process Design of Marine Systems
- Pipeline Virtual Anchor Length Calculation
- Basic Principles of Aboveground GRE Piping System
- Steel Pipeline Wall Thickness Calculation With Example
-
Topic: Piping Design Basics
- What is the Meaning of Galvanizing Pipe?
- Online Course on: Engineering Mechanics Overview to Comprehend ASME Piping and Pressure Vessel Codes
- Piping Layout Engineer Interview Questions for Piping Design
- Super Duplex Stainless Steel: A Comprehensive Guide for Oil and Gas Applications
- What Causes Stresses in A Piping and Pipeline System?
- Differences Between Piping Wall Thickness and Pipeline Wall Thickness
- Introduction to Composite Piping System
- What are Pipe Flange Protectors?
- What is a Link Seal? Its Advantages, Applications, Sizing, Working, and Installation
- What is a Cryogenic Valve in Piping? Its Features and Applications
- What are Spool Valves? Their Types, Working, Construction, and Design Considerations
- What is a Pinch Valve? Working, Types, Selection, and Advantages of a Pinch Valve
- What is a Solenoid Valve and What is its Types?
- Bonney Forge Valves and Pipe Fittings: Bonney Forge Catalogue
- Teflon vs PTFE: Major Differences | Applications of PTFE in the Piping Industry
- What is a Threadolet Fitting? Threadolet Dimensions
- What is a Weldolet Fitting? Its Dimension and Differences with Sockolet
- What is a Hex Bolt? Its Types, Sizes, Working, Applications
- Types of Pipe Threads: NPT, BSP, Metric, and Unified Threads
- Piping Fasteners: Types, Applications, and Best Practices
- What is ASME B31.1-The Power Piping Code? What’s new in ASME B31.1-2022?
- What is CADWorx Plant Professional? CADWorx vs AutoCAD Plant 3D
- What are Cross Fittings and Why are They Important?
- What is Power Piping? Power Piping vs Process Piping
- What is a Puddle Flange? Its Types, Applications, and Advantages
- What is Valve Packing? Valve Packing Materials, Their Types, and Characteristics
- What is a Bypass Valve? Its Purpose, Working, and Applications
- Sight Glasses for Oil and Gas Industries
- Valve Stems and Their Importance in Piping Industry
- What is Process Piping? Its Definition, Materials, Codes, Applications, and Differences with Power Piping and Plumbing
- What is Steam Piping? Design Considerations for Steam Piping System
- What is a Pre Insulated Pipe? Its Applications and Advantages
- Complete Guide to Epoxy Pipe Coating: Types, Applications, Pros and Cons, and Repair Methods
- Types, Applications, and Selection of Diaphragm Valves
- Vacuum Insulated Piping Systems: Types, Applications, Specifications, and Advantages
- What is Corrosion Allowance? Factors Affecting CA: Corrosion Allowance for Steel
- Pipe End Cap Fittings or Piping Caps: Pipe Caps vs Plugs: Pipe End Caps vs Blind Flanges
- What is a Pipe Union? Its Materials, Parts, Applications, Types, and Differences with Pipe Couplings
- What is an Anti-surge Valve? Its Functions, Working, Design, Requirements, Manufacturers
- What is Tie-in in Piping? Piping Tie-in Schedule
- What is a Piping Manifold? Applications, Types, Purposes, and Design of Piping Manifolds
- What is a Motor Operated Valve (MOV)? Types, Working, Applications, and Datasheet
- What are Steam Valves? Their Types, Applications, and Specifications
- What is Smart Plant Review (SPR) or Smart Review? Its Functions and Advantages
- What is Navisworks? Components, Versions, Functions, and Advantages of Navisworks
- Piping Abbreviations | Common Piping Terms
- What are Swivel Joints? Working, Types, and Applications of Swivel Joints
- What Does MSS Mean in Piping Industry? List of MSS Standards
- What is an Access Fitting? Applications, Types, and Components of Access Fittings
- What is Glass Piping? Considerations for Glass Piping System
- What is a Throttling Valve? Definition, Applications, Working, Examples, Selection
- What is ASTM A105 Material? A105 vs A105N
- What is ASTM A106? Different Grades of ASTM A106 and their Differences
- What is a Socket Welding? Socket Welded Pipe Fittings
- What is FRP Pipe Made Of?
- What is an Anchor Flange? Its Applications, Dimensions, and Features
- What is Flange Face? Types of Flange Faces and Flange Face Finishes
- What is Gas Piping? Materials, Sizing, Working, and Problems of Gas Piping System
- What is a Refractory Lining? Materials, Selection, and Types of Refractory Lining
- What is a Concrete Pipe? Types and Applications of Concrete Pipes
- What is DN and PN Number for Pipes? Pipe Class Rating vs PN Numbers
- What is a Manifold Valve? Types of Manifold Valves
- What is a 3D Point Cloud? Tools, Features, and Applications of Point Cloud
- Detailed Online Course on Pipe Stress Analysis (25 hours of Content) with Certificate + Free Trial Version of Pipe Stress Analysis Software
- Types of Lines in Engineering/ Technical Drawings and Their Uses
- Introduction to Aluminum Pipes and Tubes
- What is PSV Testing? Its Requirements, Procedure, and Standards
- What is a Foot Valve? It’s Working, Types, and Applications: Foot Valve vs Check Valve
- What is 3D Model Review? Significance of 30%, 60%, and 90% Model Review
- What is a Shut-Off Valve? It’s Working, Function, Types, and Selection
- What is Pressure Drop? Piping Pressure Drop Equations and Calculation
- What is API 5L Pipe? Its Grades, Specification, and Schedule chart
- What is a Chemical Injection Quill? Types, Configurations, Applications
- Types, Applications, and Selection of Choke Valves for Oil and Gas Operations
- What is a Cold Box in Cryogenic Plants-Air Separation Unit
- What is a Blowdown Valve (BDV)? Its Working, Types, and Applications
- What is a Stud Bolt? Types, Selection, Materials, and Standards of Stud-Bolt
- What is a Plot Plan?
- What is a Sample Cooler? Design, Application, and Characteristics of Sample Coolers
- How to Become a Piping Designer?
- Butterfly Valve vs Ball Valve: Major Differences between a Ball Valve and a Butterfly Valve
- Zero Velocity Valves for Water Hammer Prevention
- What is a Non-Return Valve (NRV)? Types, Working, and Symbols of NRV
- What is Piping Slope and Why is it Required? Pipe Slope Calculation
- Snow and Ice Loading on Piping Systems
- What is a Spiral Wound Gasket? Applications, Types, Construction, and Specifications of Spiral Wound Gaskets
- What is an RTJ Flange? | Ring Type Joint Flanges
- Spiral Welded Pipes: Applications, Manufacturing, Advantages, and Disadvantages
- Characteristics of Crude Oil | API Gravity, Flash Point, Fire Point, Octane Number
- Guidelines for Slurry Piping and Pipeline System Design
- What is Pipe Routing? | Concepts of Pipe Routing
- What is Stress Corrosion Cracking (SCC)? Mechanism and Prevention of SCC
- What is Hydrogen Induced Cracking (HIC)? | Hydrogen Induced Cracking Mechanism
- What is an Air Relief Valve, Air Release Valve, or Air Valve?
- What is Pipe Spacing? Pipe and Pipeline Spacing Chart
- What is a Valve Trim? Types, Components, and Selection of Valve Trims, and Valve Trim Charts
- Hydrogen Piping and Pipeline Systems | ASME B31.3 vs ASME B31.12
- What is an FPSO? Its Components, Working, and Advantages
- Types of Pipes: Classification of Pipes
- Types and Materials for Water Piping
- What is Pipe Flushing | Criteria for Pipe Flushing
- What is HVAC Piping? Types, Materials, and Standards for HVAC Piping
- What is Cryogenic Piping? | Materials and Pipe Supports for Cryogenic Services
- Underground Piping Insulation
- Fluid Flow | Flow through Pipes| Effects of Fluid Properties on the Piping System
- What is a Basis of Design or BOD? How to Write a Basis of Design for a Project?
- What is a Pipe Sleeve? Its Functions, Materials, and Uses
- What is Pressure Reducing Valve? Its Types, Applications, and Advantages
- What is Fire-Safe Valve? API 607 vs API 6FA
- Importance of Vents and Drains in Piping System
- Top Piping Design Software Packages for 2024 | 2D & 3D Modelling Software Packages | Piping Design CAD Tools
- Top Pipe Stress Analysis Software Packages for 2024
- What are Hub Connectors? | Its Design, Benefits, and Applications
- What’s new in ASME B31.3-2020? ASME B31.3 2020 vs 2018
- What are Vessel Trims? / Examples and Characteristics of Pressure Vessel Trims
- What is Case Hardening | Case Hardening of Steel
- What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
- What Is Annealing Steel | Annealing Process of Steel
- What is a Thrust Block? It’s Design, Construction, Types, Working, Differences with Anchor Block
- What is Viscosity? | Factors Affecting Viscosity | Newton’s law of Viscosity
- What is Pipeline Welding? | Methods of Pipeline Welding
- Introduction to FRP Pipes | Their Properties, Specification, Codes, Joining, Supporting, and Applications
- How is Steel Made? Steel Production Process
- What is HDPE Pipe? | Types and Design of HDPE Pipes
- Ductile Iron Pipe Dimensions
- Types of Pipe Joints / Piping Joints
- Welding Positions: Pipe Welding Positions
- Piping Installation and Erection Procedure
- Heat Affected Zone (HAZ): Definition, Causes, Effects, Color Bands, Reduction
- Pour Point: Definition, Significance, Features, Measurements, Factors
- Storage Tank Construction: Procedure and Method Statement
- Pressure Relief Valve (PRV): Definition, Types, Working, Location, Sizing, Codes and Standards
- Meaning and Requirements of ASME U Stamp on Pressure Vessels
- Drip Legs: Definition, Purpose, Configuration, Selection, Installation, and Sizing
- What is a Needle Valve? Types, Symbols, Working
- What is a Deluge Valve? | Types and Working of Deluge Valves
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- What is a Double Block and Bleed (DBB) Valve? Its Working and Application
- Deluge System: Definition, Working, Applications, and Advantages
- Duplex Stainless Steel (DSS): Definition, Grades, Composition, Properties, and Applications
- Guided Cantilever Method
- Flange Bolt Torque Calculation and Pipe Flange Bolt Torque Chart
- What is Pump Priming and Why it is Required? | Self-Priming Pumps
- Surge Relief Valve: Definition, Function, Types, Sizing, Selection
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- Slug Catcher: Definition, Types, Selection & Design Steps
- Poisson’s Ratio-Formula, Significance, Equation, Example
- What is Induction Bending? Hot Bending vs. Cold Bending
- Pressure Transient Analysis for Liquid HC Pipelines | Water Hammer Calculation-Joukowsky Formula
- Flare System: Definition, Types, Components, and Design
- What is Cladded Pipe? Difference Between Clad and Lined Pipe | Weld Overlay
- What is the Reynolds Number? The Equation for Reynolds Number and Its Significance
- What is Radiographic Testing? It’s Types, Principles, Procedures, Standards, Advantages, and Disadvantages
- Design of Centrifugal Compressor Piping and Appurtenances excluding Anti-Surge Systems
- Factor of Safety: Definition, Equation, Examples, Calculator
- Flexible Metal Hoses: An essential guide
- What are Slip Joints in Piping?
- PVC Piping and Fittings: Applications, Manufacturing, Standards, & Support Span of PVC Piping
- Introduction to Stress-Strain Curve
- Pascal’s law: Definition, Formula, Applications, and Examples
- 3-Phase Separator Design Basics
- Pressure Vessel Nozzles: Definition, Types, Allowable Loads and Design
- Automatic Recirculation Valve: Working Principle, Applications, Advantages, Pump Protection Scenarios
- Plug Valves: Parts, Working, Types, Symbol, Applications, Advantages, and Disadvantages
- Cast Iron vs Cast Steel: How to identify Cast Iron and Steel
- What is a Globe Valve? Working, Parts, Types, symbols
- Bernoulli’s Equation & Principle: Definition, Derivation, Examples, Application
- Venturimeter: Definition, Parts, Working, Equation, Applications, Installation
- Pipe Weight Calculation | Steel Pipe Weight Chart
- Overview of Lateral Buckling and Upheaval Buckling of Pipelines
- Actuators: Definition, Parts, Working, Types, Selection
- Meaning of Ultrasonic Testing | Ultrasonic Testing of Welds
- What is Piping Fabrication? | Tools for Pipe Fabrication
- 15 Most Common Welding Defects, Causes and Remedies
- Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry
- What are Check Valves? Types of Check Valves & Their Symbols
- Valves in Piping: Types, Application, Selection, Standards, Components, Working
- Threaded Connections in Piping: Threaded Pipe Fittings
- Butterfly Valves: Uses, Types, Working, Advantages, Symbols
- Importance of Bourdon Effect, True and Effective Axial Force
- Types of Pipe Flanges for Piping and Pipeline Systems
- Creep Rupture Usage Factor for Allowable Variations in Elevated Temperature Service
- Minimum Design Metal Temperature (MDMT) and Impact Test
- What is a P&ID Drawing | P&ID Symbols | How to Read P & ID Drawings
- Introduction to Gate Valves and Gate Valve Types
- Piping Inspection Basics
- What is Fireproofing? Types, Materials, Methods
- Difference between API 650 and API 620 Tanks: API 650 vs API 620
- Design of Bolted Connections or Bolted Joints
- What is a Pipe Expansion Joint and Why do I need one?
- Steam Trap Installation Best Practices
- Types of Stresses in a Piping System
- What is Chemical Cleaning? Procedure and Examples
- Difference between ASME B16.47 Series A and Series B Flanges
- Vacuum Breaker: Uses, Working, Function, Installation
- Nozzle Reinforcement Calculation for a Cylindrical Nozzle
- Who is a Piping Design Engineer or Piping Designer or Piping Layout Engineer?
- Piping Engineer: Types, Roles, Career, Skills, Jobs
- Differences Between ASME B31.3 and B31.1: B31.3 vs B31.1
- Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition
- AVEVA E3D Tutorial: Equipment Modeling with Practical Example
- 12 Phases of Project Life Cycle | Oil and Gas Project Life-Cycle
- Piping Material Take Off: MTO, BOM, BOQ & MTO Stages
- Upstream, Midstream, Downstream Oil and Gas Industry
- Turbine Piping: Definition, Working Philosophy, Layout Consideration, Stress Analysis, NEMA SM 23
- Pipe Thickness Calculation | Pipe Wall Thickness Calculator
- What is a Miter Bend? Design Formulas for Miter Bend Calculation
- Engineering Deliverables for Chemical, Oil & Gas Projects
- Dish and Nozzle Center line Distance Calculation from Nozzle Orientation of Pressure Vessel
- Case Study of Tank Farm Design and Dike Wall Height Calculation
- Stress or Strain: Which Comes First?
- B31.4 vs B31.8-Differences between ASME B31.4 and ASME B31.8
- Pressure Temperature Rating and Flange Rating of ASME Flanges
- Differences Between Seamless and Welded Pipe | Seamless vs Welded Pipe
- Underground / Buried Piping System Design
- Storage Tank Piping Layout with Online Course
- Comparison of Pipe and Tube | Pipe Vs Tube
- Considerations for Storage Tanks Nozzles Orientation
- Pump Suction Intake Design with Sample Calculation
- Emergency Eye Wash Station and Emergency Shower Requirements
- Rupture Disc: Definition, Types, Components, Selection, Sizing, Advantages, Installation
- Details about Spectacle Blind and Spacers
- What are Insulating Gaskets? Their Types, Components, Applications, Installation
- Injection Point and Mixing Points for Process Streams
- Level Gauges: Types, Sizing, and Ordering Information | Level Instrument | Level Indicator
- Comparison between Piping and Pipeline Engineering : Piping vs Pipeline
- Difference between Tee and Barred Tee
- Stub-in vs Stub-on | Differences between Stub-in and Stub-on Piping Connection
- What is Acoustic-Induced Vibration or AIV?
- Flow-Induced Vibration or FIV in a Piping System with Online Course
- Types of Fractional Distillation Process
- Introduction to Fire Protection System | Fire Fighting System
- Fixing Location of Various Static Equipment: Fired Heater, Reactor, Exchanger, Drums
- Hot and Cold Thermal Insulation for Piping | Calculation of Thermal Insulation Thickness
- Introduction to Hose Couplings | Elaflex Coupling | Todo Coupling
- How to Select a Bolt? | Bolt Selection Process
- Piping Strainers: Applications, Types, Design Standards, Symbol, Materials, Selection
- What is Piping Flexibility? Requirement of Flexibility in Piping Design
- Valve Inspection & Testing | API 598 | Third Party Valve Inspection
- What is a Piping Drawing? | Types of Piping Drawings
- Buried GRP/FRP pipe Laying and Installation Procedure
- Types of Flow Meters and Their Applications
- Types of Pipe Materials and Their Selection / Metallic Pipe
- Outline of Piping Design: Basic Elements
- Shell & Tube Heat Exchanger Piping | Online Course on Drums/Exchanger Layout & Stress Analysis
- Introduction to EOT CRANES & HOISTS
- What is Steam Blowing? Steam Blowing Procedure
- Pipe Expansion Loops on the Piping or Pipeline Systems
- 11 Questions & Answers from ASME B31.3 that a Piping Stress Engineer must know
- What is a Piping Elbow? | Types of Pipe Elbows
- Plant Layout Design Rules | Piping Layout Rules
- Selection of Pipe Flanges in Piping Industry
- Importance of Inter Discipline Check or IDC
- Design Guidelines for PE & ROTO Lined Carbon Steel Piping
- Storage Tank Settlement for Piping Stress Analysis
- What is Category M Fluid Service for Process Piping Design?
- Piping Nipples for Piping and Plumbing Industry
- What are Control Valves? | Selection and Types of Control Valves
- Material Take-Off (MTO) & Processing for Piping System
- Hydrostatic Test in Piping: Hydrotest Vs Pneumatic Test
- What is Severe Cyclic Conditions as per Process Piping Code ASME B31.3?
- Piping Isometric Drawing Checklists | Isometric Checklist
- What is a Steam Trap? Types, Selection, Features, Codes & Standards
- Overview of Pipe Coupling and Pipe Coupling Types
- Pipe Rack and Rack Piping Design Considerations
- Scope of Piping: Inputs and Outputs of Piping Discipline
- Tee Connections in Piping | Equal Tee, Reducing Tee | Piping Tee Dimension
- PDMS Video Tutorial/Lessons for Beginners
- Cold Pull: How cold pull is applied at site and its drawback
- Inspection & Test, Marking & Color Coding and Packing Requirements for Pipes & Fittings
- Meaning of Pipe Schedule | Pipe Schedule Chart | Pipe Schedule 40 & 80 Dimensions
- Widely Used Piping Codes and Standards
- Overview of Piping and Instrument Interface
- Selection of Pipes for a Plant: Pipe Selection Guidelines
- Significance of HOLD in Process Piping Engineering Deliverable
- Oil Mist Lubrication System
- What is Heat Tracing? Steam Tracing vs Electric Tracing
- What is a Restriction Orifice (RO)? Its Applications, Types, Working, and Sizing
- What is Indian Boiler Regulation (IBR)? ASME B31.1 vs IBR
- Christmas Tree and Wellhead: Function, Components, Differences, Design Codes
- Air Cooled Heat Exchangers (ACHE)
- What is Post Weld Heat Treatment (PWHT)? Its Procedure, Advantages, and Requirements
- Piping Elbow or Bend SIF (Stress Intensification Factor)
- Technical requirements for Pipes & Fittings for preparation of Purchase Requisition
- Checklist for Piping Stress Analysis using Caesar II
- Piping Design Guide of Reactors
- What is a Sour Service? | NACE Sour Service Criteria
- Plastic Piping System: Types of Plastic Pipes
- Damaging effects of Low-Velocity Flow In Piping And Pipelines
- Dry Gas Sealing Systems
- Flange Bolt Tightening Procedure | Bolt Tightening Steps
- What is a RePAD, RF Pad, or Reinforcement Pad?
- Equipment Nozzle Loads and Means for Reducing Them
- Hot Tapping on Operating Lines
- What is Corrosion Under Insulation (CUI) | Thermal Sprayed Aluminium (TSA)
- Factors Affecting Line Sizing of Piping or Pipeline Systems
- Piping Design Guidelines for Horizontal Drums
- What are Drilling Rigs? | Types of Drilling Rigs
- Offshore Pipeline Design Guidelines
- Material Selection & Quality Management for a Cross Country Pipeline
- Types of Pressure-Relieving Devices for Protection from Overpressure
- Pipeline Construction Stages
- Pumps & Pumping Systems
- Motion Amplification Technology (MAT) for Piping Vibration Visualization
- What is a Thermowell? Types of Thermowell
- Rack Piping for a Piping Stress Engineer
- Piping Insulation: Functions, Materials, and Types of Pipe Insulation
- Introduction to Marine Loading Arm
- Overview of GRP Pipes
- Telegram Channels / Telegram Groups for Piping and Related Engineering
- Cleaning Requirements of Piping Systems
- Steps for the Procurement of Piping / Mechanical items
- Process Design of Marine Systems
- Selection of Valves: Valve Selection Procedure
- Guidelines for Sizing of Restriction Orifice for Single-phase Fluids
- Internal Pipe Coating | FBE Coating | Glass-Flake Coating | PE & ROTO Lining
- Changes in ASME B31.3-2018 with respect to the ASME B31.3-2016 edition
- Piping Isometric Drawings | Symbols, How to Read, Software | Piping Isometrics
- Preparation of LC and LG Arrangement
- Considerations for Project Site Selection
- Pipe Color Coding and Pipe Marking Criteria with Examples
- Compressor Piping Layout: Compressor Piping Design
- Pipe Reducers: Concentric Reducers, Eccentric Reducers, Differences
- What is Hazardous Area Classification? Steps and Guides
- Anti-Corrosive Composites for Oil and Gas Industry
- Top 15 Piping Books for a Piping Engineer
- Air Cooler Piping Design
- List of Piping Design Companies in India
- Examples of Hazards of Pressure Testing
- Liquified Natural Gas (LNG): Properties, Uses, Origin, Composition, Process, Companies
- Steel Surface Coating for Corrosion Prevention
- Basic Principles of Aboveground GRE Piping System
- Piping Design Considerations for Vertical Columns or Tall Towers (Column Piping)
- LPG Storage Tanks: Meaning, Types, Selection, Specification, and Design Calculations
- Pump Commissioning and Start-Up: Pump Commissioning Checklist
- High Temperature and High-Pressure Piping
- What is Winterization? Requirements for the Basic Design of Winterization Systems
- Checking of Design | Design Checking | Design Checklist
- Types of Gaskets Used with Pipe Flanges
- Importance & Impact of Stress Intensification Factor (SIF) in Piping
- Technical Bid Evaluation Criteria and Vendor Offer Review
- A Guide to Plant Clearances and Access Requirements
- What is a Ball Valve? Parts, Types, Working, Materials, Testing, and More
- Jacketed Piping: Interview questions and answers
- Top 180+ Piping (Stress) Interview Questions with Answers
-
Topic: Piping Interface
- What is a Turnbuckle? Its Types, Materials, Application, and Installations
- Welding Inspectors: CSWIP and AWS-CWI
- What is Sucker Rod Pump or Beam Pump?
- What is a Sucker Rod? Its Types and Importance
- What is a Pipe Spool and Why is it Important?
- What is NFPA (National Fire Protection Association)? | NFPA Codes and Standards
- Copper Pipes and Tubes: Types, Applications, Sizes
- Material Handling Systems in Construction
- Job Safety Analysis: Definition, Purpose, Requirements, Team Composition, Procedure, Sample Format
- How to Weld Galvanized Steel? Risks Associated with Galvanized Steel Welding
- What is Tube Bending? Working, Types, Applications of Tube Bending
- Does Stainless Steel Rust or Corrode?
- What is a Link Seal? Its Advantages, Applications, Sizing, Working, and Installation
- Design of Oxygen Pipeline for Cold Blast Enrichment in a Steel Plant – A Case Study
- What is Geographic Information System (GIS)? Its Importance in Petroleum and Pipeline Industry
- Flow Transmitters vs Flow Meters: Major Differences
- Design of Sub-Sea Pipelines
- What are Pipeline Block Valves? Design of Pipeline Block Valve Stations
- Pipeline Engineering Interview Questions
- What is a Golden Joint? Meaning, Application, and Code Requirements
- Hydrostatic Test of Pipelines | Hydrostatic Test Equipment
- Pig Launchers, Receivers, and Traps for Pipeline Pigging
- Types of Loads on Structures: An In-Depth Guide
- Pipe Bevelling Machines and Tools: Types and Applications
- What is Pipe Bevelling? Its Definition, Types, Importance, Methods
- What is a Pipeline Stopple? Importance of Stopple Fittings
- Guide to Pipe and Pipeline Bends: Hot Bends, Cold Bends, Elastic Bends
- What are Tube Benders? Their Types, Components, Applications, and Selection
- What are Tube Fittings? Their Types, Applications, Materials, Selection, and Differences with Pipe Fittings
- What is a Pipe Adapter? Their Types, Materials, Applications
- Bulkhead Fittings: A Comprehensive Guide
- Hose Connectors: A Comprehensive Guide
- What is a Concrete Pump? Its Working, Types, and Applications
- What is Structural Resonance? Its Effects and Mitigation Options
- What is a Hazardous Environment? Examples, Types, and Safeguarding
- What is Petroleum Coke or Petcoke? Its Types, Applications, and Differences with Coal
- Pipe Ferrules: Uses, Types, Materials, Installation, and Benefits
- Understanding Pipe Wye Fittings: Wye Fitting vs Lateral Connection
- What is a Compression Fitting? Its Types, Working, Applications, Advantages, Disadvantages
- Understanding Lost Time Injury (LTI) and Its Impact on Workplace Safety: Lost Time Injury Frequency Rate
- Explaining Street Elbows: How They Differ From Piping Elbows
- What is Vapor Density and Why Is It Important? Vapor Density of Air and Water
- What is Fire Point? Differences Between Flash Point and Fire Point
- What is Flash Point? Its Significance, Measurement, and Examples
- The Steps of Manufacturing of Pressure Vessels
- What are Modulating Valves? Types, Applications, and Benefits
- What is Structural Design? Objectives and Stages of Structural Design
- Floor Gratings: Types, Advantages, Materials, Applications
- Tender Documents vs Contract Documents
- Understanding Commissioning: A Crucial Process in the Oil and Gas Industries
- International Building Code (IBC): A Comprehensive Guide
- Top 8 Civil and Structural Engineering Design and Analysis Software Tools for 2024
- What is a Pipe Shaver? Working and Specification of Fiberglass Pipe Shavers
- What is Grouting in Civil Construction? A Comprehensive Guide
- Types of Plumbing Pipes: Their Advantages, Features, and Applications
- PVC Pipe Sizes: PVC Piping Dimensional Chart
- Through Bolting for Secure Connections: Anchor Bolts vs Through Bolts
- What are Concrete Anchors? Their Applications, Materials, and Types
- What Are API Flanges? | API Flange Charts and Dimensions
- What is a Multiport Selector Valve or MSV? Importance of MSV Skids
- How to Clean Pipelines?
- Rusting Pipes: Causes, Prevention, and Treatment
- Pipe Fabrication Shops in Piping Construction for Oil and Gas Industries: Shop Fabrication vs Site Fabrication
- Pig Signallers: Types, Components, Materials, and Installation Guidelines
- What is Fillet Welding? Its Parts, Types, Applications, Symbols, and Differences with Butt Welding
- Roles of Pipeline Engineers: Piping Engineer vs Pipeline Engineer
- What Are As-Built Drawings? Construction Drawings vs As-Built Drawings
- What is CE Marking? Its Full Form, Meaning, Requirements, Notified Bodies, Steps, and Applications
- What is a Pressure Switch? Its Working, Types, and Selection
- Role of Civil Engineers in the Oil and Gas Sector
- What is Hydro Jetting?
- Meaning of LO and LC in Valves
- Role of Biologists in the Oil and Gas Sector
- What is Fitness for Service? API 579 Fitness for Service Assessment
- What is Positive Material Identification or PMI? | Methods, Applications, and Advantages
- What is a Desander? Types, Working, Features, and Selection of Desanders
- What is a Pressure Control Valve (PCV)? Types and Applications of PCV
- What is a Temperature Control Valve? It’s Working, Applications, and Types
- What is PSSR or Pre-Startup Safety Review?
- What is an Orifice Flowmeter? Its Working, Installation, Types, Advantages, and Disadvantages
- What is Level Measurement? Its Types, Working, & Advantages
- What are Lower Explosive Limits (LEL) and Upper Explosive Limits (UEL)
- Introduction to Smart-Plant Materials-SMAT
- What is Girth Welding? Pipeline Girth Welding
- What is an Excavator? Applications and Types of Excavators
- What is High Integrity Pressure Protection System (HIPPS)?
- What is a Septic Tank? Types, Working and Maintenance of Septic Tank Systems
- What is DN and PN Number for Pipes? Pipe Class Rating vs PN Numbers
- What is a Boom Lift? Applications, Sizes, and Types of Boom lifts
- What is a Manifold Valve? Types of Manifold Valves
- What Is White Rust? Its Formation, Prevention, and Treatment
- What is a Fire Pump? Working, Sizing, and Types of Fire Pumps
- Detailed Online Course on Pipe Stress Analysis (25 hours of Content) with Certificate + Free Trial Version of Pipe Stress Analysis Software
- Types of Lines in Engineering/ Technical Drawings and Their Uses
- What is Instrumentation Engineering? Components and Example of Instrumentation
- What is Metal Grating? Types and Uses of Metal Gratings
- What is Driving EPC Digital Transformation?
- What is a Forklift? Working and Types of Forklifts for the Construction Industry
- Types of Structural Steel Shapes
- How to Calculate Weight of a Steel Plate? Steel Plate Weight Calculator
- What is Structural Steel Fabrication? Its Process Stages, Uses, Advantages
- What is a Sideboom PipeLayer?
- Alarm Management for Oil & Gas Industries
- What is PSV Testing? Its Requirements, Procedure, and Standards
- What are Pickling and Passivation? Their Meaning, Procedure, Advantages, and Differences
- What is Smart Plant Instrumentation (SPI) Intools?
- Types of Anchor Bolts: Their Selection and Uses
- What are Inch-Dia and Inch-Meter in Piping? Their Significance, Calculation, and Examples
- What is Condition-Based Maintenance (CBM)?
- What is Cold Cutting? Types of Cold Cutting Machines
- P-Number, F-Number, and A-Number in Welding
- What is Nitrogen Purging? Applications, Procedures, and Benefits of N2 Purging
- What is Inerting? Gases Used for Inerting and Their Selection Criteria
- What is Flange Facing? Working and Types of Flange Facing Machines
- Snow and Ice Loading on Piping Systems
- What is Hot Bolting? Its Procedure, Hazards, Best Practices, and Advantages
- What is a Flange Alignment Tool? Applications, Types, and Working of Flange Alignment Tools
- What is A Vibration Analyzer? Applications and Working of Vibration Analyzers
- What is an RTJ Flange? | Ring Type Joint Flanges
- What is a Vibration Sensor? Its Application, Working, Types, and Selection
- What is Hydrogen Induced Cracking (HIC)? | Hydrogen Induced Cracking Mechanism
- Hydrogen Piping and Pipeline Systems | ASME B31.3 vs ASME B31.12
- What is Pipe Flushing | Criteria for Pipe Flushing
- What is a Fire Hydrant? Its Types, Working, Components, and Color Coding
- What are Flowlines in Oil and Gas? Differences between Flowlines and Pipelines
- Factory Acceptance Test– What Is FAT, and How Does It Work?
- What is a Monorail Crane? Its Types, Components, Specifications, Advantages, and Applications
- What is a Pipe Sleeve? Its Functions, Materials, and Uses
- What is a Wing Nut? Its Working, Types, Materials, Applications, Advantages
- Significance of Space Velocity of Reactor
- What is Rigging Equipment?
- What is a Breather Valve? | Breather Valve for Tanks
- What is Concurrent Engineering?
- A36 Steel | Composition, Applications, and Properties of ASTM A36 Steel
- What is Tensile Strength? Tensile Strength of Steel and Other Materials
- Types of Steel | Grades of Steel
- What is Fracking? | Working of Fracking or Hydraulic Fracturing
- What is Case Hardening | Case Hardening of Steel
- What is Normalizing? Definition, Process, Advantages, and Applications of Normalizing
- What Is Annealing Steel | Annealing Process of Steel
- What is a Thrust Block? It’s Design, Construction, Types, Working, Differences with Anchor Block
- What is Pipeline Welding? | Methods of Pipeline Welding
- How is Steel Made? Steel Production Process
- What is HDPE Pipe? | Types and Design of HDPE Pipes
- Bolts vs Screws: Difference between Bolts and Screws
- Ductile Iron Pipe Dimensions
- What is Ductile Iron? | Types, Properties, and Applications of Ductile Iron
- Carbon Steel vs Stainless Steel: Differences between Stainless Steel and Carbon Steel
- What is Monel? Properties, Applications, Grades, Advantages of Monel
- Welding Positions: Pipe Welding Positions
- Fire Extinguisher: Meaning, Classes, Types, Selection, Use, Inspection
- Wastewater Treatment: Definition, Process Steps, Design Considerations, Plant Types
- What is a Framework Agreement? | Difference between Framework Agreements and Framework Contracts
- What is Material Safety Data Sheet (MSDS)? | MSDS VS SDS
- Piping Installation and Erection Procedure
- Heat Affected Zone (HAZ): Definition, Causes, Effects, Color Bands, Reduction
- Brittle Fracture and Ductile Fracture: Definition, Mechanism, Differences
- Pour Point: Definition, Significance, Features, Measurements, Factors
- Types of Maintenance
- Storage Tank Construction: Procedure and Method Statement
- Pressure Relief Valve (PRV): Definition, Types, Working, Location, Sizing, Codes and Standards
- H-beam vs I-beam: Major Differences | H-beam and I-beam Size Chart
- Types of Construction Equipment for Oil & Gas Projects
- Introduction to Finite Element Analysis or FEA
- Preventive Maintenance: Definition, Types, Philosophy, Advantages, and Disadvantages
- What is a Project Manager? | Roles of a Project Manager
- What is a Deluge Valve? | Types and Working of Deluge Valves
- PMP Certification: Importance and Preparation Steps
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- Maximum Shear Stress Theory: Tresca Theory of Failure
- What is a Topographic Survey? | Cost of Topographic Survey
- Brownfield vs Greenfield: Differences Between Brownfield and Greenfield Oil and Gas Projects
- What is a Double Block and Bleed (DBB) Valve? Its Working and Application
- Moment of Inertia: Introduction, Definition, Formula, Units, Applications
- Deluge System: Definition, Working, Applications, and Advantages
- Flange Bolt Torque Calculation and Pipe Flange Bolt Torque Chart
- Surge Relief Valve: Definition, Function, Types, Sizing, Selection
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- Slug Catcher: Definition, Types, Selection & Design Steps
- Emergency Shutdown System or ESD System
- Poisson’s Ratio-Formula, Significance, Equation, Example
- What is Induction Bending? Hot Bending vs. Cold Bending
- Pressure Transient Analysis for Liquid HC Pipelines | Water Hammer Calculation-Joukowsky Formula
- Flare System: Definition, Types, Components, and Design
- What is Cladded Pipe? Difference Between Clad and Lined Pipe | Weld Overlay
- What is the Reynolds Number? The Equation for Reynolds Number and Its Significance
- What is Radiographic Testing? It’s Types, Principles, Procedures, Standards, Advantages, and Disadvantages
- Design of Centrifugal Compressor Piping and Appurtenances excluding Anti-Surge Systems
- Factor of Safety: Definition, Equation, Examples, Calculator
- Free Body Diagram: Definition, Purpose, Examples, Steps
- Flexible Metal Hoses: An essential guide
- What are Slip Joints in Piping?
- Hooke’s Law: Statement, Equation, Graph, Applications, Limitations
- Young’s Modulus | Modulus of Elasticity | Elastic Modulus | Young’s Modulus of Steels
- PVC Piping and Fittings: Applications, Manufacturing, Standards, & Support Span of PVC Piping
- Introduction to Stress-Strain Curve
- Pascal’s law: Definition, Formula, Applications, and Examples
- Dye Penetration Test: Definition, Principles, Procedure, Standards, Advantages, and Disadvantages
- Pressure Vessel Nozzles: Definition, Types, Allowable Loads and Design
- Automatic Recirculation Valve: Working Principle, Applications, Advantages, Pump Protection Scenarios
- Plug Valves: Parts, Working, Types, Symbol, Applications, Advantages, and Disadvantages
- Cast Iron vs Cast Steel: How to identify Cast Iron and Steel
- What is a Globe Valve? Working, Parts, Types, symbols
- Bernoulli’s Equation & Principle: Definition, Derivation, Examples, Application
- Venturimeter: Definition, Parts, Working, Equation, Applications, Installation
- Pipe Weight Calculation | Steel Pipe Weight Chart
- Scaffolding Definition: Types, Parts, Design, Materials, and Hazards of Scaffolding
- Pipefitters: Jobs, Requirements, Tools, Training, Salaries, and difference with Plumbers
- Overview of Lateral Buckling and Upheaval Buckling of Pipelines
- Actuators: Definition, Parts, Working, Types, Selection
- Meaning of Ultrasonic Testing | Ultrasonic Testing of Welds
- 15 Most Common Welding Defects, Causes and Remedies
- Types of Pipe Fittings and Components for Piping, Pipeline, and Plumbing Industry
- Bolted Steel Tanks | Design and Construction
- Butterfly Valves: Uses, Types, Working, Advantages, Symbols
- Dynamic Analysis of Piping System
- Types of Pipe Flanges for Piping and Pipeline Systems
- Difference Between ASME Sec VIII Div. 1 and Div. 2
- Magnetic Particle Inspection (MPI) Procedure
- Two-Phase Separator Design Basics
- What is a P&ID Drawing | P&ID Symbols | How to Read P & ID Drawings
- Introduction to Gate Valves and Gate Valve Types
- Piping Inspection Basics
- Storage Tank Erection: Conventional vs Jacking Method
- What is Fireproofing? Types, Materials, Methods
- Storage Tank Failure: Examples, Causes, and Prevention
- Camouflaging of Oil Storage Tanks
- Difference between API 650 and API 620 Tanks: API 650 vs API 620
- Design of Bolted Connections or Bolted Joints
- Steam Trap Installation Best Practices
- What is Chemical Cleaning? Procedure and Examples
- Stress Analysis of Surface Laid Pipelines
- Vacuum Breaker: Uses, Working, Function, Installation
- Nozzle Reinforcement Calculation for a Cylindrical Nozzle
- Who is a Piping Design Engineer or Piping Designer or Piping Layout Engineer?
- Piping Engineer: Types, Roles, Career, Skills, Jobs
- Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition
- Reciprocating Pump: Introduction, Definition, Parts, Working Principle, Advantages, Disadvantages, and Applications
- 12 Phases of Project Life Cycle | Oil and Gas Project Life-Cycle
- Upstream, Midstream, Downstream Oil and Gas Industry
- What is a Miter Bend? Design Formulas for Miter Bend Calculation
- Engineering Deliverables for Chemical, Oil & Gas Projects
- Dish and Nozzle Center line Distance Calculation from Nozzle Orientation of Pressure Vessel
- Difference between Primary loads and Secondary loads in a Piping System
- Stress or Strain: Which Comes First?
- B31.4 vs B31.8-Differences between ASME B31.4 and ASME B31.8
- Pressure Temperature Rating and Flange Rating of ASME Flanges
- What Are The Pump Affinity Laws? Explanation with a Sample Calculation
- Pressure vs Stress: Differences Between Pressure and Stress
- Comparison of Pipe and Tube | Pipe Vs Tube
- Considerations for Storage Tanks Nozzles Orientation
- Pump Suction Intake Design with Sample Calculation
- What is a Vortex Flow Meter? Its Working, Types, Applications, and Importance
- Emergency Eye Wash Station and Emergency Shower Requirements
- Rupture Disc: Definition, Types, Components, Selection, Sizing, Advantages, Installation
- Details about Spectacle Blind and Spacers
- What are Insulating Gaskets? Their Types, Components, Applications, Installation
- Level Gauges: Types, Sizing, and Ordering Information | Level Instrument | Level Indicator
- Collar Bolts To Maintain Removable Bundles in Heat Exchangers
- What is FMS or Flow Metering Skid?
- Comparison between Piping and Pipeline Engineering : Piping vs Pipeline
- Difference between Tee and Barred Tee
- Types of Fractional Distillation Process
- Introduction to Fire Protection System | Fire Fighting System
- Types of Structural Platforms
- General Requirements for Field Welding
- Underwater Welding & Inspection Overview
- HVAC Systems: Meaning, Objectives, Components, Types, Selection
- Valve Inspection & Testing | API 598 | Third Party Valve Inspection
- Aboveground Storage Tanks: Types, Components, Design Aspects, and Erection
- Overview of Pile Foundation Design
- What is a Piping Drawing? | Types of Piping Drawings
- Buried GRP/FRP pipe Laying and Installation Procedure
- Types of Flow Meters and Their Applications
- Cathodic Protection: Definition, Working Principles, Types, Design, Advantages, Applications
- Outline of Piping Design: Basic Elements
- Shaft Alignment Methodology for Compressor and Driver
- Hydrostatic Field Test of GRP / GRE lines
- Pipe Expansion Loops on the Piping or Pipeline Systems
- Pipelines Material Selection in the Oil & Gas Industry
- Connection Procedure (Alignment) of Process Piping with Rotating Equipment
- Long Lead Items for a Process Piping Industry
- Design Guidelines for PE & ROTO Lined Carbon Steel Piping
- Difference Between Centrifugal and Reciprocating Compressor
- Process Safety Management (PSM) and Process Safety
- What are Control Valves? | Selection and Types of Control Valves
- What is an Isolation Joint? Monolithic Isolation Joints (MIJ) for Pipelines
- Hydrostatic Test in Piping: Hydrotest Vs Pneumatic Test
- What is Vibration Monitoring and Why is it Important?
- Vessel Clips | Vessel Cleats | Pressure Vessel Cleats
- Internal Cleaning of Piping System
- Site Visit Safety Rules: Operating Plant Visit Safety Guidelines
- Start-up and Commissioning of the Pipeline
- Temperature Measurement by Filled Thermal Systems
- Overview of Piping and Instrument Interface
- Excavation Hazards and Control Measures
- Significance of HOLD in Process Piping Engineering Deliverable
- An article on Tank Pad Foundation
- Oil Mist Lubrication System
- Forms of Corrosion: Corrosion Types
- Overview of Conductivity and Conductivity Measurement
- Micro Tunneling for Pipeline Installation
- What is a Restriction Orifice (RO)? Its Applications, Types, Working, and Sizing
- Carbon Monoxide Poisoning: Sources, Signs & Symptoms, Prevention
- Christmas Tree and Wellhead: Function, Components, Differences, Design Codes
- Air Cooled Heat Exchangers (ACHE)
- What is Post Weld Heat Treatment (PWHT)? Its Procedure, Advantages, and Requirements
- Vacuum Box Testing of Butt, Fillet, and Lap Weld
- What is an Oxidation-Reduction Potential (ORP)? How is it Measured?
- What is Static Equipment? Types and List of Static Equipments
- Hydraulic Calculation in Piping Networks
- Piping Design Guide of Reactors
- What is a Sour Service? | NACE Sour Service Criteria
- Plastic Piping System: Types of Plastic Pipes
- Damaging effects of Low-Velocity Flow In Piping And Pipelines
- Dry Gas Sealing Systems
- Flange Bolt Tightening Procedure | Bolt Tightening Steps
- Brief Explanation of Major Pressure Vessel Parts
- Difference Between PFD and P&ID: PFD vs P&ID
- Overview of Offshore Pipeline Systems
- Equipment Nozzle Loads and Means for Reducing Them
- Hazards of Cranes and Crane safety during Construction
- Hot Tapping on Operating Lines
- What is Corrosion Under Insulation (CUI) | Thermal Sprayed Aluminium (TSA)
- Factors Affecting Line Sizing of Piping or Pipeline Systems
- Software Based Pipeline Leak Detection
- What is Produced Water? | Produced Water Treatment Processes
- Piping Stress Man-hour estimation process for a specific Project
- Piping Design Guidelines for Horizontal Drums
- What are Drilling Rigs? | Types of Drilling Rigs
- Offshore Pipeline Design Guidelines
- Pipeline Stress Analysis
- Process Design of Centrifugal Compressor System
- Material Selection & Quality Management for a Cross Country Pipeline
- Rotary Selector Valve (RSV) and Multi Phase Flow Meter (MPFM)
- Process Engineering Deliverables for EPC of Oil and Gas Industries
- 10 Considerable Points for Pressure Vessel Nozzle Load Tables
- AFT Impulse Pulsation Frequency Analysis (PFA) Module
- Elevated Flare systems used in Process Industries
- Types of Pressure-Relieving Devices for Protection from Overpressure
- Pipeline Construction Stages
- Understanding Centrifugal Compressor Surge and Control
- Understand the Harmonic Analysis and Ensure the Pressure pulsation comply with API 674
- Pumps & Pumping Systems
- Emergency Response Procedures and Measures for Process Units
- What is a Thermowell? Types of Thermowell
- Piping Insulation: Functions, Materials, and Types of Pipe Insulation
- Overview of Gas Hydrates and Chemical Injection
- Introduction to Marine Loading Arm
- Centrifugal Pumps with Speed Control
- Telegram Channels / Telegram Groups for Piping and Related Engineering
- What is Pipeline Pigging? Pig Types, Pig Launcher, and Receiver
- Process Design of Marine Systems
- Selection of Valves: Valve Selection Procedure
- Guidelines for Sizing of Restriction Orifice for Single-phase Fluids
- Pipeline Virtual Anchor Length Calculation
- Storage Tank design using TANK software and re-rating with API 620 & API 579
- Sun Shades for the Oil and Gas Industry and their Design
- Internal Pipe Coating | FBE Coating | Glass-Flake Coating | PE & ROTO Lining
- DeSalting and Dehydration of Crude Oil
- Control Valve Sizing
- Lifting Lug Design with Examples
- What is a Combined Cycle Power Plant?
- pH Analyzers: pH Meters
- Preparation of LC and LG Arrangement
- Considerations for Project Site Selection
- What is System Earthing?
- Emergency Vents for Storage Tanks
- Interpretation of External Load On Nozzle Flange using PV Elite & Code Case 2901
- Pipe Reducers: Concentric Reducers, Eccentric Reducers, Differences
- What is a Pressure Gauge? Types of Pressure Measuring Instruments
- Cooling Tower Water Treatment Basics
- Liquified Natural Gas (LNG): Properties, Uses, Origin, Composition, Process, Companies
- Basic Principles of Aboveground GRE Piping System
- LPG Storage Tanks: Meaning, Types, Selection, Specification, and Design Calculations
- What Is Modal Analysis and Why Is It Necessary? Caesar II Piping Modal Analysis Steps
- Pump Commissioning and Start-Up: Pump Commissioning Checklist
- Steel Pipeline Wall Thickness Calculation With Example
- Bracing Connections/Cross-bracing Design Example
- Pump Installation Checklist and Best Practices
- What is Winterization? Requirements for the Basic Design of Winterization Systems
- Checking of Design | Design Checking | Design Checklist
- Mechanical Draft and Special Type Cooling Towers
- What is a Reboiler? Types and Selection of Reboilers
- Importance & Impact of Stress Intensification Factor (SIF) in Piping
- Technical Bid Evaluation Criteria and Vendor Offer Review
-
Topic: Piping Stress Analysis
- What is MSS SP-58 and Why Is It Important?
- What’s New in Caesar II-Version 14?
- Complete Pipe Stress Analysis using Caesar II Online Course (30+ Hours)
- Is Pipe Stress Analysis Required for Cold Water Piping Systems from Pump Stations?
- What is a Spring Hanger? Its Purpose, Types, and Selection
- What are Piping Vibration Isolators?
- The New Version of Pipe Stress Analysis Software PASS/START-PROF 4.86 Released! Have a Look at the New Fantastic Capabilities
- Importance of Gasket m and y Factors
- Caesar II Version 13 is Releasing! Take a Look at the Extended Capabilities it will Provide
- Detailed Online Course on Pipe Stress Analysis (25 hours of Content) with Certificate + Free Trial Version of Pipe Stress Analysis Software
- How to Deal with Local Primary Membrane Stresses?
- An Overview of Linear and Non-Linear Analysis in Piping Stress Calculations
- Snow and Ice Loading on Piping Systems
- Allowable Stress for Pressure Relieving Reaction Load vs Occasional load
- What is a Pipe Saddle? Its Application, Design, and Configuration
- What is a U-bolt? Types, Installation, and Applications
- What is a Wear Pad? Functions of Pipe Wear Pads
- What is a Pipe Anchor? Its Definition, Types, and Functions
- What is a Pipe Shoe? Its Types and Functions
- Piping Thermal Expansion and Contraction (Thermal Movement) in Piping Design
- Top Pipe Stress Analysis Software Packages for 2024
- What’s new in ASME B31.3-2020? ASME B31.3 2020 vs 2018
- An Issue about USER DEFINED SIFs
- What is Tensile Strength? Tensile Strength of Steel and Other Materials
- What is a Thrust Block? It’s Design, Construction, Types, Working, Differences with Anchor Block
- Brittle Fracture and Ductile Fracture: Definition, Mechanism, Differences
- Introduction to Finite Element Analysis or FEA
- AutoPIPE vs CAESAR II: Differences between CAESAR II & AUTOPIPE
- Maximum Shear Stress Theory: Tresca Theory of Failure
- Introduction to Von Mises Stress Concept
- Moment of Inertia: Introduction, Definition, Formula, Units, Applications
- Guided Cantilever Method
- Poisson’s Ratio-Formula, Significance, Equation, Example
- What is Time History Analysis? Steps with example
- Factor of Safety: Definition, Equation, Examples, Calculator
- Free Body Diagram: Definition, Purpose, Examples, Steps
- Flexible Metal Hoses: An essential guide
- What are Slip Joints in Piping?
- Hooke’s Law: Statement, Equation, Graph, Applications, Limitations
- Is Pipe Stress-Range Calculated Correctly?
- Young’s Modulus | Modulus of Elasticity | Elastic Modulus | Young’s Modulus of Steels
- Air Cooler Piping Stress Analysis using Caesar II
- Introduction to Stress-Strain Curve
- Overview of Lateral Buckling and Upheaval Buckling of Pipelines
- What is Response Spectrum? | Steps for Earthquake Response Spectrum Analysis
- Stress Classification in Pressure Vessels and Piping as per ASME B31 and BPVC Codes
- Dynamic Analysis of Piping System
- Importance of Bourdon Effect, True and Effective Axial Force
- Creep Rupture Usage Factor for Allowable Variations in Elevated Temperature Service
- Minimum Design Metal Temperature (MDMT) and Impact Test
- Modeling Piping Connection to Storage Tank
- Caesar II Version 12 vs Caesar II Version 11
- What is a Pipe Expansion Joint and Why do I need one?
- Types of Stresses in a Piping System
- Stress Analysis of Surface Laid Pipelines
- Nozzle Reinforcement Calculation for a Cylindrical Nozzle
- Stress Intensity Factor (SIF), Flexibility Factor: ASME B31.3 vs ASME B31J
- Piping Engineer: Types, Roles, Career, Skills, Jobs
- Differences Between ASME B31.3 and B31.1: B31.3 vs B31.1
- Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition
- Variable Spring Support Design without the aid of Caesar II Hanger Auxiliary
- Turbine Piping: Definition, Working Philosophy, Layout Consideration, Stress Analysis, NEMA SM 23
- Pipe Thickness Calculation | Pipe Wall Thickness Calculator
- Engineering Deliverables for Chemical, Oil & Gas Projects
- Dish and Nozzle Center line Distance Calculation from Nozzle Orientation of Pressure Vessel
- Difference between Primary loads and Secondary loads in a Piping System
- Stress or Strain: Which Comes First?
- Spring Hanger Pipe Support Selection Procedure for Piping Stress Analysis
- B31.4 vs B31.8-Differences between ASME B31.4 and ASME B31.8
- Underground / Buried Piping System Design
- Pressure vs Stress: Differences Between Pressure and Stress
- Water Pumping Station Piping Stress Analysis using Flexible Sleeve Coupling
- Importing an Autodesk REVIT model into Piping Stress Analysis Software START-PROF
- How to import an AVEVA E3D or PDMS model into START-PROF Piping Stress Analysis Software
- How to import a CADWorx model into START-PROF Piping Stress Analysis Software
- Heat Exchanger Modeling in Caesar II and Stress Analysis
- Details about Intergraph Smart Licensing Platform for Caesar II (PDF)
- Recorded Webinar on Expansion Joints in CAESAR II
- What is Acoustic-Induced Vibration or AIV?
- Flow-Induced Vibration or FIV in a Piping System with Online Course
- Piping Thermal Bowing Consideration in Caesar II with an Example
- How to Avoid Zero Anchor Loads from Piping
- Stress Analysis of PSV/PRV Piping Systems Using Caesar II | PSV Piping Stress Analysis
- Methods for Checking Flange Leakage | Flange Leakage Calculation | Flange Leakage Analysis
- Load Cases for Pipe Stress Analysis: Caesar II Load Cases
- What is Piping Flexibility? Requirement of Flexibility in Piping Design
- Several ASME B31 & EN 13480 Issues Needed to Know for Pipe Stress Engineer
- Applicability of Caesar II for stress analysis of lines having D/t ratio more than 100
- Use of Sway Brace, Strut, and Snubber for Pipe Supporting
- Smart Tee Model considerations in START-PROF
- Design Considerations for a Piping System with an Expansion Bellow
- Technical and General requirements for Spring Hangers while purchasing
- What is Thermal Bowing?
- What is Steam Blowing? Steam Blowing Procedure
- Pipe Expansion Loops on the Piping or Pipeline Systems
- 11 Questions & Answers from ASME B31.3 that a Piping Stress Engineer must know
- Modular Piping Design- How to do a Piping Stress Analysis
- K-FACTORs (MINOR LOSSES) – HOW WE CALCULATE THEM?
- Storage Tank Settlement for Piping Stress Analysis
- Pipe Stress Analysis Report Preparation for Issuing to the Client
- What is Severe Cyclic Conditions as per Process Piping Code ASME B31.3?
- Vessel Clips | Vessel Cleats | Pressure Vessel Cleats
- Technical Bid Evaluation of Vendor Spring Hanger Offers
- Modeling of Sway Braces in Caesar II for stress analysis
- How to perform the buckling analysis of Vacuum Piping
- API 650 Tank Bulging Effect or Bulging Effect of Storage Tank Shells
- Cold Pull: How cold pull is applied at site and its drawback
- Flange Leakage Checking by Pressure Equivalent Method in Caesar II
- Meaning of Pipe Schedule | Pipe Schedule Chart | Pipe Schedule 40 & 80 Dimensions
- Details about CAESAR II Error: “Material is Outside the Temperature Range”.
- What Will You Do if Carbon Steel Pipe is Installed in Place of LTCS: CS vs LTCS
- Load Case Editor vs Operation Mode Editor
- Stress Analysis of GRP / GRE / FRP Piping System Using Caesar II (ISO 14692)
- Spring hangers: Common Interview Questions with Answers
- Methods for WRC 107 (WRC 537) and WRC 297 Checking in Caesar II
- Stress Analysis of Vertical Reboiler Piping using Caesar II
- Pipe Trunnion or Dummy Support and Their Stress Calculation
- Piping Stress Analysis Specification | Flexibility Specification
- START-PROF Piping Stress Video Training Series [In-Depth]
- Caesar II Error “Could Not Open TEMPMAT”- Steps to Overcome it
- Air Cooled Heat Exchangers (ACHE)
- Piping Elbow or Bend SIF (Stress Intensification Factor)
- Cold Springing (Cold Pull) In Piping Systems
- Does Friction Forces Exist in Cold State of Piping or Not?
- Checklist for Piping Stress Analysis using Caesar II
- Stress Analysis Features of the Tall Pipe Risers
- Spring Hanger Selection and Design Guidelines in Caesar II
- Snubber Modelling in Pipe Stress Analysis in Caesar II
- Pipe Support Friction Coefficient and Frictional Loads on Pipe Supports
- Static Method of Wind Analysis of Piping systems in Caesar II using Pressure Vs elevation Method
- Equipment Nozzle Loads and Means for Reducing Them
- CAESAR II and START-PROF Verification
- Stress Analysis of Centrifugal Compressor Connected Piping Systems using Caesar II
- Flange Leakage Evaluation based on NC 3658.3 Method method using Caesar II
- Free Trial Version of Pipe Stress Analysis Software and Online Pipe Stress Analysis Training Course with Certificate
- Piping Stress Man-hour estimation process for a specific Project
- Hot Sustained Stress (Lift-Off) Checking in Caesar II
- Slug Flow Analysis Using Dynamic Spectrum Method in Caesar II
- What is Restrained and Unrestrained Pipes: Part 2
- Pipeline Stress Analysis
- What is Restrained and Unrestrained Pipes: Part 1
- 10 Considerable Points for Pressure Vessel Nozzle Load Tables
- AFT Impulse Pulsation Frequency Analysis (PFA) Module
- Tutorial: API 610 module of Caesar II software
- Understand the Harmonic Analysis and Ensure the Pressure pulsation comply with API 674
- Procedure to Restore the Corrupted Caesar II File
- Motion Amplification Technology (MAT) for Piping Vibration Visualization
- Rack Piping for a Piping Stress Engineer
- Piping Insulation: Functions, Materials, and Types of Pipe Insulation
- Common Causes of Piping Vibration: How to Reduce Pipe Vibration?
- Advantages of using Coordinate System in Caesar II
- Stress Analysis of Pump Piping (Centrifugal) System using Caesar II
- Tutorial: Stress Analysis of Plastic Piping System using PASS/START-PROF Software
- How to Open CAESAR II File in START-PROF?
- Basics for Stress Analysis of Underground Piping using Caesar II
- Pipeline Virtual Anchor Length Calculation
- Pipe Stress Analysis from Water Hammer Loads
- Jacketed Piping: Definition, Types, Design Considerations, and Stress Analysis
- CAESAR II vs START-PROF Piping Stress Analysis Software Comparison
- Changes in ASME B31.3-2018 with respect to the ASME B31.3-2016 edition
- How to use ASME B31J and FEM for SIF and k-factors for Stress Analysis
- Underground Piping Stress Analysis Procedure using Caesar II
- Changes in ASME B31.3-2016 with respect to its earlier edition (ASME B31.3-2014)
- Lifting Lug Design with Examples
- What if Piping Continuation is Unknown? Part 2. Underground Piping
- Advantages of using Block Operation in Caesar II
- What is Slug Flow? Steps for Slug Flow Analysis
- Modeling Relief Valve (Pressure Safety Valve) Thrust force
- Stress Analysis of Column piping system using Caesar II
- Seismic Analysis of Piping Systems: Earthquake Analysis
- Stress Analysis of Flare Piping Systems
- What is Pipe Stress Analysis? A Comprehensive Guide
- Modeling Connection to Fired Heater
- How to Model Slug Flow Loads
- Buried Pipe Stress Analysis Basics and Online Course
- Interpretation of External Load On Nozzle Flange using PV Elite & Code Case 2901
- Consideration of Flanged Elbow or Flanged Bend in Stress Analysis
- What if Piping Continuation is Unknown? Part 1. Above Ground Piping
- What are Sustained and Expansion Stresses?
- ASME Section VIII Flange Leakage Checking Method in Caesar II
- Recent changes in ASME B31.3 and their implementation in CAESAR II
- Top 15 Piping Books for a Piping Engineer
- ASME B31J & B31J Essentials: Why these are useful in Piping Stress Analysis?
- Fatigue Analysis: Definition, Methods, Types, Reasons, Failure Criteria, Caesar II Case Study
- Basic Principles of Aboveground GRE Piping System
- Pipe Support Span (Spacing) | Pipe Support Spacing (Span) Chart/Table
- What Is Modal Analysis and Why Is It Necessary? Caesar II Piping Modal Analysis Steps
- High Temperature and High-Pressure Piping
- Pump-Piping Alignment Check Methodology using Caesar II
- Pump Installation Checklist and Best Practices
- Stress Analysis of GRP / GRE / FRP Piping using START-PROF
- Rigid Struts- Definition, Applications, and Modeling in Caesar II
- Stress Analysis of HDPE, PE-RT, PP-H, PP-R, PVC-C, PVDF Piping
- Stress Critical Line List or Piping Critical Line List: Definition and Basis
- What’s new in ISO 14692-2017 Edition
- What does a Pipe Stress Engineer need to know?
- Buried/Underground Piping Stress Analysis using START-PROF
- Importance & Impact of Stress Intensification Factor (SIF) in Piping
- Nonstandard Valve Model for Pipe Stress Analysis: Angular, 3-way, 4-way, with Actuator
- Creating Pipe Model in PASS/START-PROF Software
- Major features of CAESAR II-2019, Version 11.00
- Procedure for Converting a Higher version Caesar II file into its Lower version
- Substantive Changes to 2014 Edition of ASME B31.3
- Jacketed Piping: Interview questions and answers
- Top 180+ Piping (Stress) Interview Questions with Answers
-
Topic: Piping Stress Basics
- What is MSS SP-58 and Why Is It Important?
- Is Pipe Stress Analysis Required for Cold Water Piping Systems from Pump Stations?
- What is a Spring Hanger? Its Purpose, Types, and Selection
- What are Piping Vibration Isolators?
- Importance of Gasket m and y Factors
- Detailed Online Course on Pipe Stress Analysis (25 hours of Content) with Certificate + Free Trial Version of Pipe Stress Analysis Software
- How to Deal with Local Primary Membrane Stresses?
- An Overview of Linear and Non-Linear Analysis in Piping Stress Calculations
- Allowable Stress for Pressure Relieving Reaction Load vs Occasional load
- What is a Pipe Saddle? Its Application, Design, and Configuration
- What is a U-bolt? Types, Installation, and Applications
- What is a Wear Pad? Functions of Pipe Wear Pads
- What is a Pipe Anchor? Its Definition, Types, and Functions
- What is a Pipe Shoe? Its Types and Functions
- Piping Thermal Expansion and Contraction (Thermal Movement) in Piping Design
- Top Pipe Stress Analysis Software Packages for 2024
- What’s new in ASME B31.3-2020? ASME B31.3 2020 vs 2018
- An Issue about USER DEFINED SIFs
- What is Tensile Strength? Tensile Strength of Steel and Other Materials
- What is a Thrust Block? It’s Design, Construction, Types, Working, Differences with Anchor Block
- Brittle Fracture and Ductile Fracture: Definition, Mechanism, Differences
- Introduction to Finite Element Analysis or FEA
- AutoPIPE vs CAESAR II: Differences between CAESAR II & AUTOPIPE
- Maximum Shear Stress Theory: Tresca Theory of Failure
- Introduction to Von Mises Stress Concept
- Moment of Inertia: Introduction, Definition, Formula, Units, Applications
- Guided Cantilever Method
- Poisson’s Ratio-Formula, Significance, Equation, Example
- What is Time History Analysis? Steps with example
- Factor of Safety: Definition, Equation, Examples, Calculator
- Free Body Diagram: Definition, Purpose, Examples, Steps
- Flexible Metal Hoses: An essential guide
- What are Slip Joints in Piping?
- Hooke’s Law: Statement, Equation, Graph, Applications, Limitations
- Is Pipe Stress-Range Calculated Correctly?
- Young’s Modulus | Modulus of Elasticity | Elastic Modulus | Young’s Modulus of Steels
- Air Cooler Piping Stress Analysis using Caesar II
- Introduction to Stress-Strain Curve
- Overview of Lateral Buckling and Upheaval Buckling of Pipelines
- What is Response Spectrum? | Steps for Earthquake Response Spectrum Analysis
- Stress Classification in Pressure Vessels and Piping as per ASME B31 and BPVC Codes
- Dynamic Analysis of Piping System
- Importance of Bourdon Effect, True and Effective Axial Force
- Creep Rupture Usage Factor for Allowable Variations in Elevated Temperature Service
- Minimum Design Metal Temperature (MDMT) and Impact Test
- Modeling Piping Connection to Storage Tank
- Caesar II Version 12 vs Caesar II Version 11
- What is a Pipe Expansion Joint and Why do I need one?
- Types of Stresses in a Piping System
- Stress Analysis of Surface Laid Pipelines
- Nozzle Reinforcement Calculation for a Cylindrical Nozzle
- Stress Intensity Factor (SIF), Flexibility Factor: ASME B31.3 vs ASME B31J
- Differences Between ASME B31.3 and B31.1: B31.3 vs B31.1
- Pipe Thickness Calculation of Straight Pipe under External Pressure/ Vacuum Pressure Condition
- Variable Spring Support Design without the aid of Caesar II Hanger Auxiliary
- Turbine Piping: Definition, Working Philosophy, Layout Consideration, Stress Analysis, NEMA SM 23
- Pipe Thickness Calculation | Pipe Wall Thickness Calculator
- Engineering Deliverables for Chemical, Oil & Gas Projects
- Dish and Nozzle Center line Distance Calculation from Nozzle Orientation of Pressure Vessel
- Difference between Primary loads and Secondary loads in a Piping System
- Stress or Strain: Which Comes First?
- Spring Hanger Pipe Support Selection Procedure for Piping Stress Analysis
- B31.4 vs B31.8-Differences between ASME B31.4 and ASME B31.8
- Pressure vs Stress: Differences Between Pressure and Stress
- Heat Exchanger Modeling in Caesar II and Stress Analysis
- Recorded Webinar on Expansion Joints in CAESAR II
- What is Acoustic-Induced Vibration or AIV?
- Flow-Induced Vibration or FIV in a Piping System with Online Course
- Piping Thermal Bowing Consideration in Caesar II with an Example
- How to Avoid Zero Anchor Loads from Piping
- Stress Analysis of PSV/PRV Piping Systems Using Caesar II | PSV Piping Stress Analysis
- Methods for Checking Flange Leakage | Flange Leakage Calculation | Flange Leakage Analysis
- Load Cases for Pipe Stress Analysis: Caesar II Load Cases
- What is Piping Flexibility? Requirement of Flexibility in Piping Design
- Several ASME B31 & EN 13480 Issues Needed to Know for Pipe Stress Engineer
- Use of Sway Brace, Strut, and Snubber for Pipe Supporting
- Design Considerations for a Piping System with an Expansion Bellow
- Technical and General requirements for Spring Hangers while purchasing
- What is Thermal Bowing?
- What is Steam Blowing? Steam Blowing Procedure
- Pipe Expansion Loops on the Piping or Pipeline Systems
- 11 Questions & Answers from ASME B31.3 that a Piping Stress Engineer must know
- Storage Tank Settlement for Piping Stress Analysis
- What is Severe Cyclic Conditions as per Process Piping Code ASME B31.3?
- Vessel Clips | Vessel Cleats | Pressure Vessel Cleats
- Technical Bid Evaluation of Vendor Spring Hanger Offers
- How to perform the buckling analysis of Vacuum Piping
- API 650 Tank Bulging Effect or Bulging Effect of Storage Tank Shells
- Meaning of Pipe Schedule | Pipe Schedule Chart | Pipe Schedule 40 & 80 Dimensions
- What Will You Do if Carbon Steel Pipe is Installed in Place of LTCS: CS vs LTCS
- Load Case Editor vs Operation Mode Editor
- Stress Analysis of GRP / GRE / FRP Piping System Using Caesar II (ISO 14692)
- Spring hangers: Common Interview Questions with Answers
- Methods for WRC 107 (WRC 537) and WRC 297 Checking in Caesar II
- Stress Analysis of Vertical Reboiler Piping using Caesar II
- Piping Stress Analysis Specification | Flexibility Specification
- Caesar II Error “Could Not Open TEMPMAT”- Steps to Overcome it
- Piping Elbow or Bend SIF (Stress Intensification Factor)
- Cold Springing (Cold Pull) In Piping Systems
- Does Friction Forces Exist in Cold State of Piping or Not?
- Checklist for Piping Stress Analysis using Caesar II
- Stress Analysis Features of the Tall Pipe Risers
- Spring Hanger Selection and Design Guidelines in Caesar II
- Snubber Modelling in Pipe Stress Analysis in Caesar II
- Pipe Support Friction Coefficient and Frictional Loads on Pipe Supports
- Static Method of Wind Analysis of Piping systems in Caesar II using Pressure Vs elevation Method
- Equipment Nozzle Loads and Means for Reducing Them
- Stress Analysis of Centrifugal Compressor Connected Piping Systems using Caesar II
- Flange Leakage Evaluation based on NC 3658.3 Method method using Caesar II
- Free Trial Version of Pipe Stress Analysis Software and Online Pipe Stress Analysis Training Course with Certificate
- Piping Stress Man-hour estimation process for a specific Project
- Hot Sustained Stress (Lift-Off) Checking in Caesar II
- Slug Flow Analysis Using Dynamic Spectrum Method in Caesar II
- What is Restrained and Unrestrained Pipes: Part 2
- Pipeline Stress Analysis
- What is Restrained and Unrestrained Pipes: Part 1
- 10 Considerable Points for Pressure Vessel Nozzle Load Tables
- Motion Amplification Technology (MAT) for Piping Vibration Visualization
- Rack Piping for a Piping Stress Engineer
- Common Causes of Piping Vibration: How to Reduce Pipe Vibration?
- Advantages of using Coordinate System in Caesar II
- Stress Analysis of Pump Piping (Centrifugal) System using Caesar II
- How to Open CAESAR II File in START-PROF?
- Basics for Stress Analysis of Underground Piping using Caesar II
- Pipeline Virtual Anchor Length Calculation
- Pipe Stress Analysis from Water Hammer Loads
- Jacketed Piping: Definition, Types, Design Considerations, and Stress Analysis
- CAESAR II vs START-PROF Piping Stress Analysis Software Comparison
- Changes in ASME B31.3-2018 with respect to the ASME B31.3-2016 edition
- How to use ASME B31J and FEM for SIF and k-factors for Stress Analysis
- Changes in ASME B31.3-2016 with respect to its earlier edition (ASME B31.3-2014)
- What if Piping Continuation is Unknown? Part 2. Underground Piping
- Advantages of using Block Operation in Caesar II
- What is Slug Flow? Steps for Slug Flow Analysis
- Modeling Relief Valve (Pressure Safety Valve) Thrust force
- Seismic Analysis of Piping Systems: Earthquake Analysis
- Stress Analysis of Flare Piping Systems
- What is Pipe Stress Analysis? A Comprehensive Guide
- Modeling Connection to Fired Heater
- How to Model Slug Flow Loads
- Buried Pipe Stress Analysis Basics and Online Course
- Interpretation of External Load On Nozzle Flange using PV Elite & Code Case 2901
- Consideration of Flanged Elbow or Flanged Bend in Stress Analysis
- What if Piping Continuation is Unknown? Part 1. Above Ground Piping
- What are Sustained and Expansion Stresses?
- ASME Section VIII Flange Leakage Checking Method in Caesar II
- Recent changes in ASME B31.3 and their implementation in CAESAR II
- ASME B31J & B31J Essentials: Why these are useful in Piping Stress Analysis?
- Fatigue Analysis: Definition, Methods, Types, Reasons, Failure Criteria, Caesar II Case Study
- Basic Principles of Aboveground GRE Piping System
- Pipe Support Span (Spacing) | Pipe Support Spacing (Span) Chart/Table
- High Temperature and High-Pressure Piping
- Pump-Piping Alignment Check Methodology using Caesar II
- Pump Installation Checklist and Best Practices
- Stress Analysis of GRP / GRE / FRP Piping using START-PROF
- Rigid Struts- Definition, Applications, and Modeling in Caesar II
- Stress Analysis of HDPE, PE-RT, PP-H, PP-R, PVC-C, PVDF Piping
- Stress Critical Line List or Piping Critical Line List: Definition and Basis
- What’s new in ISO 14692-2017 Edition
- What does a Pipe Stress Engineer need to know?
- Buried/Underground Piping Stress Analysis using START-PROF
- Nonstandard Valve Model for Pipe Stress Analysis: Angular, 3-way, 4-way, with Actuator
- Major features of CAESAR II-2019, Version 11.00
- Substantive Changes to 2014 Edition of ASME B31.3
- Top 180+ Piping (Stress) Interview Questions with Answers
-
Topic: Piping Supports
- What is a Pipe Strap? Its Types, Importance, Materials, Applications
- Vertical Pipe Support | Supporting Vertical Pipes
- Types of Pipe Hanger Supports and Their Applications
- What is a Spring Hanger? Its Purpose, Types, and Selection
- Pipe Support Brackets: Types, Installation, and Importance
- What is a Trapeze Hanger? Its Types, Components, Applications, and Advantages
- What are Insulated Pipe Supports?
- What is a Clevis Hanger? Its Features and Applications
- What are Piping Vibration Isolators?
- What is Temporary Pipe Support and Why Do We Need Them?
- SmartPads System: Protection Against External Pipeline Corrosion Under Pipe Supports
- Supporting and Design Consideration of Small-bore Piping
- What is Cryogenic Piping? | Materials and Pipe Supports for Cryogenic Services
- What is a Pipe Saddle? Its Application, Design, and Configuration
- What is a Pipe Shoe? Its Types and Functions
- Various Types of Pipe Clamps for Piping and Plumbing Industry
- Guidelines for Modeling and Supporting of Large Diameter Pipes / Pipelines
- Types of Piping Supports for the Oil and Gas Industries
- Use of Sway Brace, Strut, and Snubber for Pipe Supporting
- Pipe Trunnion or Dummy Support and Their Stress Calculation
- Pipe Support Friction Coefficient and Frictional Loads on Pipe Supports
- Supporting of Dual Insulated Piping System
- Pipe Support Span (Spacing) | Pipe Support Spacing (Span) Chart/Table
-
Topic: Plumbing
- Copper Pipes and Tubes: Types, Applications, Sizes
- What are Tube Fittings? Their Types, Applications, Materials, Selection, and Differences with Pipe Fittings
- What is a Pipe Adapter? Their Types, Materials, Applications
- Bulkhead Fittings: A Comprehensive Guide
- Hose Connectors: A Comprehensive Guide
- Pipe Ferrules: Uses, Types, Materials, Installation, and Benefits
- Understanding Pipe Wye Fittings: Wye Fitting vs Lateral Connection
- What is a Compression Fitting? Its Types, Working, Applications, Advantages, Disadvantages
- Explaining Street Elbows: How They Differ From Piping Elbows
- Types of Plumbing Pipes: Their Advantages, Features, and Applications
- PVC Pipe Sizes: PVC Piping Dimensional Chart
-
Topic: Process
- What is Advanced Process Control (APC)? Its Working and Benefits
- What are Choked Flow, Cavitation, and Flashing in Control Valves?
- Guide to Corrosion Inhibitors in the Oil and Gas Industry
- Technical Aspects Of Equipment Procurement
- What are Industrial Scrubbers? Their Working, Types, and Advantages
- What is a Modular Process Skid? Advantages, Applications, and Characteristics of a Modular Skid Design
- What is Valve Coefficient (Cv) or Flow Coefficient? | Importance of Valve Cv
- What is Process Optimization? | Basics and Techniques of Process Optimization (With PDF)
- Pressure Safety Valve Sizing | Relief Sizing Calculation
- Centrifugal Compressors: Applications, Types, Functions, Parts, and Design Guidelines
- What are Newtonian and Non-Newtonian Fluids and What are the Differences?
- What are the Differences Between LNG and LPG?
- Why Is Graphite a Better Lubricant Than Oil?
- Importance of Ratio of Specific Heats (γ=Cp/Cv)
- Types of Pressure Vessels and Their Selection
- Chemical Injection: Everything You Need to Know
- What is a Fired Equipment? Types of Fired Equipment for Oil and Gas Industries
- What is a Process Datasheet? A Comprehensive Guide to Process Datasheets
- Meaning of Slope, Free Draining, Gravity Flow, and No Pocket in P&ID
- What is Design Review? Purposes and Steps for the Design Review Process
- What is a Vortex Breaker? Applications, Types, Design, and Working of a Vortex Breaker
- Overview of the Ammonia Production: Haber-Bosch Process
- Oil and Gas Industry Products
- Desalination: Overview of the Reverse Osmosis Process
- What is a Demister Pad? Its Working, Application, Types, and Features
- Types of Heat Exchangers and Their Selection
- Separation in The Oil & Gas Industry, Their Classification and Working
- What is a Pump Performance Curve? Types of Pump Performance Curves
- What is Process Engineering and What Do Process Engineers Do?
- What is CNG? Its Properties, Uses, Origin, Composition, & CNG Process
- What is a Condensate? Properties and Applications of Condensate
- What is Mach Number? Its Significance, Applications, and Formula
- Alarm Management for Oil & Gas Industries
- Waste-to-Energy: Overview of the Gasification Process
- Colors of Hydrogen: Green, Blue, Grey, Black, Brown, Pink, Turquoise, Yellow, Red, and White Hydrogen
- What is PSV Testing? Its Requirements, Procedure, and Standards
- What is Pressure Drop? Piping Pressure Drop Equations and Calculation
- What is Greenhouse Effect and Net-zero Carbon Emission?
- What is a Chemical Injection Quill? Types, Configurations, Applications
- What is a Cold Box in Cryogenic Plants-Air Separation Unit
- What is Nitrogen Blanketing? Purpose, Procedure, and Applications of Tank Blanketing
- Design and Configuration of Cooling Water System
- Distillation Column Control- Pressure Control
- What is Nitrogen Purging? Applications, Procedures, and Benefits of N2 Purging
- What is Inerting? Gases Used for Inerting and Their Selection Criteria
- Operation Features of a Distillation Column: Flooding, Weeping, and Entrainment
- Cryogenic Air Separation Process: A brief introduction
- What are Polymers? Their Definition, Types, Examples, Uses
- What is Process Control? Its Importance and Working Principle
- Characteristics of Crude Oil | API Gravity, Flash Point, Fire Point, Octane Number
- What is a Thermal Relief Valve? Difference Between TRV and PRV
- Types of Industrial Dryers and Their Selection
- Plate Tower vs Packed Tower: Selection, Differences, Advantages, and Disadvantages
- Isolation Philosophy: Equipment, Instruments, and Utilities Isolation Methods
- Determination of Design Pressure & Design Temperature
- What is Process Flow Diagram (PFD)? Purpose, Symbols, Examples, & Development of Process Flow Diagram
- What is an Ejector? Types, Parts, Datasheet, and Working Principles of Ejectors
- What is Material Selection Diagram? Its Purpose, Development, and Example
- Hydraulic Calculation Guidelines
- Fluid Flow | Flow through Pipes| Effects of Fluid Properties on the Piping System
- What is a Coalescer? Its Types, Working, and Applications
- Introduction to Reboiler Control
- Introduction to Clean Energy Piping & Pipeline Systems
- What is a Flare KOD | Working, Functions, Sizing, and Design of a Knock Out Drum
- What is a Basis of Design or BOD? How to Write a Basis of Design for a Project?
- Significance of Space Velocity of Reactor
- PSIA vs PSIG: Differences | Conversion from PSIA to PSIG and PSIG to PSIA
- What is a Breather Valve? | Breather Valve for Tanks
- What are Agitators? Selection and Types of Agitators
- What is Petroleum Refining? Crude Oil Refining Process Steps
- What is Crude Oil? / Crude Oil Price and Types
- What is Fracking? | Working of Fracking or Hydraulic Fracturing
- Gas Turbines: Definition, Applications, Working, Components, Types, Design, Advantages
- Pour Point: Definition, Significance, Features, Measurements, Factors
- Pressure Relief Valve (PRV): Definition, Types, Working, Location, Sizing, Codes and Standards
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- Deluge System: Definition, Working, Applications, and Advantages
- Surge Relief Valve: Definition, Function, Types, Sizing, Selection
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- Slug Catcher: Definition, Types, Selection & Design Steps
- Emergency Shutdown System or ESD System
- Pressure Transient Analysis for Liquid HC Pipelines | Water Hammer Calculation-Joukowsky Formula
- Flare System: Definition, Types, Components, and Design
- What is the Reynolds Number? The Equation for Reynolds Number and Its Significance
- Design of Centrifugal Compressor Piping and Appurtenances excluding Anti-Surge Systems
- Pascal’s law: Definition, Formula, Applications, and Examples
- 3-Phase Separator Design Basics
- Automatic Recirculation Valve: Working Principle, Applications, Advantages, Pump Protection Scenarios
- Two-Phase Separator Design Basics
- What is a P&ID Drawing | P&ID Symbols | How to Read P & ID Drawings
- What is Chemical Cleaning? Procedure and Examples
- Vacuum Breaker: Uses, Working, Function, Installation
- 12 Phases of Project Life Cycle | Oil and Gas Project Life-Cycle
- Upstream, Midstream, Downstream Oil and Gas Industry
- Engineering Deliverables for Chemical, Oil & Gas Projects
- What Are The Pump Affinity Laws? Explanation with a Sample Calculation
- Underground / Buried Piping System Design
- Coating Selection for External Bolting to Reduce Corrosion
- Rupture Disc: Definition, Types, Components, Selection, Sizing, Advantages, Installation
- Types of Fractional Distillation Process
- Understanding Pressure and Temperature in the context of Pressure Vessel Design
- Introduction to Pressure Surge Analysis
- Pressure Vessels: Types, Design, Supports, Applications, Materials
- What is HAZOP? Mechanism, Advantages, Applications of HAZOP Analysis
- Major Factors Affecting the Pump Performance
- Water Hammer Basics in Pumps for Beginners
- K-FACTORs (MINOR LOSSES) – HOW WE CALCULATE THEM?
- Long Lead Items for a Process Piping Industry
- Difference Between Centrifugal and Reciprocating Compressor
- What is Category M Fluid Service for Process Piping Design?
- Process Safety Management (PSM) and Process Safety
- What is a Steam Trap? Types, Selection, Features, Codes & Standards
- Managing Technical Information Exchange With Process Equipment / Package Vendors
- Basics of Reciprocating Compressors / Difference Between Reciprocating Compressor and Rotary Compressor
- API 610 Pumps vs ANSI / ASME B73.1 Centrifugal Pumps
- Hydraulic Calculation in Piping Networks
- Brief Explanation of Major Pressure Vessel Parts
- Difference Between PFD and P&ID: PFD vs P&ID
- What is Corrosion Under Insulation (CUI) | Thermal Sprayed Aluminium (TSA)
- Factors Affecting Line Sizing of Piping or Pipeline Systems
- What is Produced Water? | Produced Water Treatment Processes
- What is Fluid Flow?
- Process Design of Centrifugal Compressor System
- Process Engineering Deliverables for EPC of Oil and Gas Industries
- AFT Impulse Pulsation Frequency Analysis (PFA) Module
- Elevated Flare systems used in Process Industries
- Types of Pressure-Relieving Devices for Protection from Overpressure
- Understanding Centrifugal Compressor Surge and Control
- Emergency Response Procedures and Measures for Process Units
- Overview of Gas Hydrates and Chemical Injection
- Guidelines for Sizing of Restriction Orifice for Single-phase Fluids
- Pipe Stress Analysis from Water Hammer Loads
- Storage Tank design using TANK software and re-rating with API 620 & API 579
- DeSalting and Dehydration of Crude Oil
- Control Valve Sizing
- What is a Combined Cycle Power Plant?
- What is Hazardous Area Classification? Steps and Guides
- Examples of Hazards of Pressure Testing
- Liquified Natural Gas (LNG): Properties, Uses, Origin, Composition, Process, Companies
- LPG Storage Tanks: Meaning, Types, Selection, Specification, and Design Calculations
- Checking of Design | Design Checking | Design Checklist
- What is a Reboiler? Types and Selection of Reboilers
- Protecting Steel Pipes: The Power of Anti-Corrosive Coatings and Linings
-
Topic: Procurement
-
Topic: Project Management
- Tender Documents vs Contract Documents
- What is Concurrent Engineering?
- What is a Framework Agreement? | Difference between Framework Agreements and Framework Contracts
- What is a Project Manager? | Roles of a Project Manager
- PMP Certification: Importance and Preparation Steps
- What is Front End Engineering Design or FEED Engineering? FEED vs Detailed Engineering
- Brownfield vs Greenfield: Differences Between Brownfield and Greenfield Oil and Gas Projects
- What is the meaning of Project Kick-Off Meeting? Its Purpose & Agenda
- 12 Phases of Project Life Cycle | Oil and Gas Project Life-Cycle
- Piping Stress Man-hour estimation process for a specific Project
-
Topic: SP3D
-
Topic: Start-Prof
- The New Version of Pipe Stress Analysis Software PASS/START-PROF 4.86 Released! Have a Look at the New Fantastic Capabilities
- Detailed Online Course on Pipe Stress Analysis (25 hours of Content) with Certificate + Free Trial Version of Pipe Stress Analysis Software
- Top Pipe Stress Analysis Software Packages for 2024
- Introduction to Finite Element Analysis or FEA
- Is Pipe Stress-Range Calculated Correctly?
- Overview of Lateral Buckling and Upheaval Buckling of Pipelines
- Stress Classification in Pressure Vessels and Piping as per ASME B31 and BPVC Codes
- Importance of Bourdon Effect, True and Effective Axial Force
- Creep Rupture Usage Factor for Allowable Variations in Elevated Temperature Service
- Minimum Design Metal Temperature (MDMT) and Impact Test
- Modeling Piping Connection to Storage Tank
- Importing an Autodesk REVIT model into Piping Stress Analysis Software START-PROF
- How to import an AVEVA E3D or PDMS model into START-PROF Piping Stress Analysis Software
- How to import a CADWorx model into START-PROF Piping Stress Analysis Software
- How to Avoid Zero Anchor Loads from Piping
- Several ASME B31 & EN 13480 Issues Needed to Know for Pipe Stress Engineer
- Smart Tee Model considerations in START-PROF
- What is Thermal Bowing?
- Modular Piping Design- How to do a Piping Stress Analysis
- K-FACTORs (MINOR LOSSES) – HOW WE CALCULATE THEM?
- Pipe Stress Analysis Report Preparation for Issuing to the Client
- How to perform the buckling analysis of Vacuum Piping
- Load Case Editor vs Operation Mode Editor
- START-PROF Piping Stress Video Training Series [In-Depth]
- Does Friction Forces Exist in Cold State of Piping or Not?
- Stress Analysis Features of the Tall Pipe Risers
- CAESAR II and START-PROF Verification
- Free Trial Version of Pipe Stress Analysis Software and Online Pipe Stress Analysis Training Course with Certificate
- What is Restrained and Unrestrained Pipes: Part 2
- What is Restrained and Unrestrained Pipes: Part 1
- Tutorial: Stress Analysis of Plastic Piping System using PASS/START-PROF Software
- How to Open CAESAR II File in START-PROF?
- Pipe Stress Analysis from Water Hammer Loads
- CAESAR II vs START-PROF Piping Stress Analysis Software Comparison
- How to use ASME B31J and FEM for SIF and k-factors for Stress Analysis
- What if Piping Continuation is Unknown? Part 2. Underground Piping
- Modeling Relief Valve (Pressure Safety Valve) Thrust force
- Modeling Connection to Fired Heater
- How to Model Slug Flow Loads
- What if Piping Continuation is Unknown? Part 1. Above Ground Piping
- Stress Analysis of GRP / GRE / FRP Piping using START-PROF
- Stress Analysis of HDPE, PE-RT, PP-H, PP-R, PVC-C, PVDF Piping
- Buried/Underground Piping Stress Analysis using START-PROF
- Nonstandard Valve Model for Pipe Stress Analysis: Angular, 3-way, 4-way, with Actuator
- Creating Pipe Model in PASS/START-PROF Software